[11] |
HARTLIEB P,LEINDL M,KUCHAR F,et al. Damage of basalt induced by microwave irradiation[J]. Minerals Engineering,2012,31:82-89.
|
[8] |
KINGMAN S W. Recent developments in microwave processing of minerals[J]. International Materials Reviews,2006,51(1):1-12.
|
[1] |
李夕兵,周子龙,王卫华. 岩石破碎工程发展现状与展望[C]// 2009~2010 岩石力学与岩石工程学科发展报告. 北京:[s. n.],2010:142-149.(LI Xibing,ZHOU Zilong,WANG Weihua. The status and prospect of development in rock fargmentation engineering[C]// Report on the Development of Rock Mechanics and Rock Engineering Discipline in 2009-2010. Beijing:[s. n.],2010:142-149.(in Chinese))
|
[9] |
KINGMAN S W,JACKSON K,CUMBANE A,et al. Recent developments in microwave-assisted comminution[J]. International Journal of Mineral Processing,2004,74(1/4):71-83.
|
[19] |
JONES D A,KINGMAN S W,WHITTLES D N,et al. The influence of microwave energy delivery method on strength reduction in ore samples[J]. Chemical Engineering and Processing:Process Intensification,2007,46(4):291-299.
|
[21] |
戴 俊,秦立科. 微波照射下岩石损伤细观模拟分析[J]. 西安科技大学学报,2014,34(6):652-655.(DAI Jun,QIN Like. Meso- simulation of rock damage under microwave irradiation[J]. Journal of Xi′an University of Science and Technology,2014,34(6):652-655.(in Chinese))
|
[2] |
尹土兵,李夕兵,叶洲元,等. 温-压耦合及动力扰动下岩石破碎的能量耗散[J]. 岩石力学与工程学报,2013,32(6):1 197-1 202. (YIN Tubing,LI Xibing,YE Zhouyuan,et al. Energy dissipation of rock fracture under thermomechanical coupling and dynamic disturbances[J]. Chinese Journal of Rock Mechanics and Engineering,2013,32(6):1 197-1 202.(in Chinese))
|
[4] |
CHEN H,LI T,LI K,et al. Experimental and numerical modeling research of rubber material during microwave heating process[J]. Heat and Mass Transfer,2018,54(5):1 289-1 300.
|
[6] |
许金余,刘 石. SHPB试验中高温下岩石变形破坏过程的能耗规律分析[J]. 岩石力学与工程学报,2013,32(增2):3 109-3 115.(XU Jinyu,LIU Shi. Analysis of energy dissipation rule during deformation and fracture process of rock under high temperatures in SHPB test [J]. Chinese Journal of Rock Mechanics and Engineering,2013,32(Supp.2):3 109-3 115.(in Chinese))
|
[10] |
OLUBAMBI P A. Influence of microwave pretreatment on the bioleaching behaviour of low-grade complex sulphide ores[J]. Hydrometallurgy,2009,95(1/2):159-165.
|
[12] |
HASSANI F,NEKOOVAGHT P M. The development of microwave assisted machineries to break hard rocks[C]// Proceedings of the 28th International Symposium on Automation and Robotics in Construction (ISARC). Seoul:[s. n.],2011:678-684.
|
[14] |
卢高明,李元辉,HASSANI F,等. 微波辅助机械破岩试验和理论研究进展[J]. 岩土工程学报,2016,38(8):1 497-1 506.(LU Gaoming,LI Yuanhui,HASSANI F,et al. Review of theoretical and experimental studies on mechanical rock fragmentation using microwave-assisted approach[J]. Chinese Journal of Geotechnical Engineering,2016,38(8):1 497-1 506.(in Chinese))
|
[16] |
高 峰,邵 焱,熊 信,等. 不同微波照射方式下岩石试样的内外升温特征试验[J]. 岩土工程学报,2020,45(4):650-657.(GAO Feng,SHAO Yan,XIONG Xin. et al. Rising characteristics of internal and external temperatures of rock specimens under different microwave irradiation modes[J]. Chinese Journal of Geotechnical Engineering,2020,45(4):650-657.(in Chinese))
|
[3] |
HASSANI F,NEKOOVAGHT P M,GHARIB N. The influence of microwave irradiation on rocks for microwaveassisted underground excavation[J]. Journal of Rock Mechanics and Geotechnical Engineering,2016,8(1):1-15.
|
[5] |
XIONG L X ,CHEN H J . Effects of high temperatures and loading rates on the splitting tensile strength of jointed rock mass[J]. Geotechnical and Geological Engineering,2019,38(1):1 885-1 898.
|
[7] |
WONG L N Y,ZHANG Y,WU Z. Rock strengthening or weakening upon heating in the mild temperature range?[J]. Engineering Geology,2020,272(7):1-9.
|
[13] |
秦立科,戴 俊. 微波照射下矿物颗粒温度分布及影响因素分析[J]. 矿冶工程,2015,35(3):96-98,102.(QIN Like,DAI Jun. Temperature distribution and influential factors for ore particles under microwave irradiation[J]. Mining and Metallurgical Engineering,2015,35(3):96-98,102.(in Chinese))
|
[15] |
田 军,卢高明,冯夏庭,等. 主要造岩矿物微波敏感性试验研究[J]. 岩土力学,2019,40(6):1-9.(TIAN Jun,LU Gaoming,FENG Xiating,et al. Experimental study on the microwave sensitivity of main rock-forming minerals[J]. Rock and Soil Mechanics,2019,40(6):1-9.(in Chinese))
|
[17] |
李元辉,卢高明,冯夏庭,等. 微波加热路径对硬岩破碎效果影响试验研究[J]. 岩石力学与工程学报,2017,36(6):1 460-1 468.(LI Yuanhui,LU Gaoming,FENG Xiating. et al. The influence of heating path on the effect of hard rock fragmentation using microwave assisted method[J]. Chinese Journal of Rock Mechanics and Engineering,2017,36(6):1 460-1 468.(in Chinese))
|
[18] |
WHITTLES D N,KINGMAN S W,REDDISH D J. Application of numerical modelling for prediction of the influence of power density on microwave-assisted breakage[J]. International Journal of Mineral Processing,2003,68(1):71-91.
|
[20] |
朱要亮,俞 缙,蔡燕燕,等. 不同环境与加热路径下的微波加热岩石的数值研究[J]. 微波学报,2018,34(5):84-89.(ZHU Yaoliang,YU Jin,CAI Yanyan,et al. Numerical study on microwave heating of rock under different environment and heating pat[J]. Journal of microwaves,2018,34(5):84-89.(in Chinese))
|
[23] |
王晓东,郝家旺. 微波照射下层理矿石破碎的能耗与粒度研究[J]. 有色金属:选矿部分,2019,5(3):64-68.(WANG Xiaodong,HAO Jiawang. Study on energy consumption and particle size of bedding ore breaking under microwave irradiation[J]. Nonferrous Metals:Mineral Processing Section,2019,5(3):64-68.(in Chinese))
|
[25] |
彭金辉,刘纯鹏. 微波场中矿物及其化合物的升温特性[J]. 中国有色金属学报,1997,7(3):53-54.(PENG Jinhui,LIU Chunpeng. Characteristics of temperature increase of minerals and compounds in microwave field[J]. The Chinese Journal of Nonferrous Metals,1997,7(3):53-54.(in Chinese))
|
[22] |
戴 俊,张越博,李栋烁,等. 微波照射下玄武岩冲击破碎特性研究[J]. 煤矿开采,2018,23(5):5-9.(DAI Jun,ZHANG Yuebo,LI Dongshuo,et al. Study of basalt impact grinding characters under microwave irradiation[J]. Coal mining technology,2018,23(5):5-9.(in Chinese))
|
[24] |
AI D H,ZHAO Y C,WANG Q F,et al. Experimental and numerical investigation of crack propagation and dynamic properties of rock in SHPB indirect tension test[J]. International Journal of Impact Engineering,2019,126(4):135-146.
|
[26] |
邵珠山,魏 玮,陈文文,等. 微波加热岩石与混凝土的研究进展与工程应用[J]. 工程力学,2020,37(5):140-155.(SHAO Zhushan,WEI Wei,CHEN Wenwen,et al. Research progress and industrial applications of microwave heating processing on rock and concrete[J]. Engineering mechanics,2020,37(5):140-155.(in Chinese))
|