基于代表性取样的节理岩体抗压强度尺寸效应试验研究

doi:10.13722/j.cnki.jrme.2020.0664

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (2075 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Representative sampling of different-size samples has a greater influence on the size effect law of jointed rock mass strength. Based on the proposed representative sampling method，series of jointed rock mass models with different sizes are constructed in this paper，and numerical simulation of the size effect on the compressive strength is carried out. The results show that the failure patterns and the stress-strain curves of rock mass samples of different sizes are quite different，and the failure mode and mechanical properties of different size rock masses are reflected by the test results obtained through representative samples，which verifies the feasibility of the representative sampling method. The size effect law of the compressive strength of jointed rock masses with different trace lengths and dip angles are analyzed，showing that the peak compressive strength gradually decreases and tends to be stable as the size increases and that different trace lengths and dip angles have different degrees of reduction in the strength. Further analysis indicates that the dispersion of the compressive strength of small-sized samples is larger while that of large-sized samples is smaller. The representative sampling method has a more obvious effect on the sampling of small-sized samples and can integrally analyze the mechanical properties of jointed rock masses of different sizes. The research work provides an experimental method for the study on size effect.

Key words： rock mechanics jointed rock mass representative sampling size effect compressive strength

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Dan1
	2
	HUANG Man1
	2
	HONG Chenjie1
	2
	CHEN Xuannan1
	2
	DU Shigui1
	2

Cite this article:

LIU Dan1,2,HUANG Man1, et al. Experimental study on size effect of compressive strength of jointed rock mass based on representative sampling[J]. , 2021, 40(4): 766-776.

URL:

http://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2020.0664 OR http://rockmech.whrsm.ac.cn/EN/Y2021/V40/I4/766

[21]	GUI Y，ZHAO G F. Modelling of laboratory soil desiccation cracking using DLSM with a two-phase bond model[J]. Computers and geotechnics，2015，69：578-587.
[8]	周喻，王莉，丁剑锋，等. 多尺度节理岩体力学特性的颗粒流分析[J]. 岩土力学，2016，37(7)：2 085-2 095.(ZHOU Yu，WANG Li，DING Jianfeng，et al. Particle flow code analysis of multi-scale jointed rock mass based upon equivalent rock mass technique[J]. Rock and Soil Mechanics，2016，37(7)：2 085-2 095.(in Chinese))
[19]	赵文，唐春安. 结构面间距和迹长的测量理论[J]. 中国矿业，1998，7(3)：36-38.(ZHAO Wen，TANG Chun¢an. The measure theory of discontinuities spacing and trace length[J]. China Mining Magazine，1998，7(3)：36-38.(in Chinese))
[29]	BAHAADDINI M，HAGAN P C，MITRA R，et al. Scale effect on the shear behaviour of rock joint based on a numerical study[J]. Engineering Geology，2014，181：212-223.
[6]	李万润. 节理岩体力学特性的尺寸效应研究[硕士学位论文][D]. 大连：大连理工大学，2015.(LI Wanrun. A Study on size effect of mechanical properties for jointed rock mass[M. S. Thesis][D]. Dalian：Dailian University of Technology，2015.(in Chinese))
[10]	YOSHINAKA R，OSAD M，PARK H，et al. Practical determination of mechanical design parameters of intact rock considering scale effect[J]. Engineering Geology，2008，96：173-186.
[12]	WU Q，KULATILAKE P H S W. REV and its properties on fracture system and mechanical properties，and an orthotropic constitutive model for a jointed rock mass in a dam site in China[J]. Computers and Geotechnics，2012，43(3)：124-142.
[13]	梁正召，张永彬，唐世斌，等. 岩体尺寸效应及其特征参数计算[J]. 岩石力学与工程学报，2013，32(6)：1 157-1 166.(LIANG Zhengzhao，ZHANG Yongbin，TANG Shibin，et al. Size effect of rock masses and associated representative element properties[J]. Chinese Journal of Rock Mechanics and Engineering，2013，32(6)：1 157-1 166. (in Chinese))
[15]	YANG J P，CHEN W Z，YANG D S，et al. Numerical determination of strength and deformability of fractured rock mass by FEM modeling[J]. Computers and Geotechnics，2015，64：20-31.
[16]	黄曼，罗战友，杜时贵. 岩石模型结构面的取样代表性试验研究[J]. 岩石力学与工程学报，2013，32(10)：2 008-2 014.(HUANG Man，LUO Zhanyou，DU Shigui. Experimental study of sampling representativeness of structural plane of rock model[J]. Chinese Journal of Rock Mechanics and Engineering，2013，32(10)：2 008-2 014. (in Chinese))
[18]	HUANG M，HONG C J，DU S G，et al. Experimental technology for the shear strength of the series scale rock joint model[J]. Rock Mechanics and Rock Engineering，2021.(to be Pressed)
[22]	SUN P F，YANG T H，YU Q L，et al. Numerical research on anisotropy mechanical parameters of fractured rock mass[J]. Advanced Materials Research，2012，524-527：310-316.
[2]	杨圣奇，苏承东，徐卫亚. 岩石材料尺寸效应的试验和理论研究[J]. 工程力学，2005，22(4)：112-118.(YANG Shengqi，SU Chengdong，XU Weiya. Experimental and theoretical study of size effect of rock material[J]. Engineering Mechanics，2005，22(4)：112-118.(in Chinese))
[3]	TUNCAY Q，HASANCEBI N. The effect of length to diameter ratio of test specimens on the uniaxial compressive strength of rock[J]. Bulletin of Engineering Geology and the Environment，2009，68(4)：491-497.
[5]	张占荣，盛谦，杨艳霜，等. 基于现场试验的岩体变形模量尺寸效应研究[J]. 岩土力学，2010，31(9)：2 875-2 881.(ZHANG Zhanrong，SHENG Qian，YANG Yanshuang，et al. Study of size effect of rock mass deformation modulus based on in-situ test[J]. Rock and Soil Mechanics，2010，31(9)：2 875-2 881.(in Chinese))
[20]	HUANG M，HONG C J，MA C R，et al. A new representative sampling method for series size rock joint surfaces[J]. Scientific Reports，2020，10：1-10.
[23]	XU T，RANJITH P G，WASANTHA P L P，et al. Influence of the geometry of partially-spanning joints on mechanical properties of rock in uniaxial compression[J]. Engineering Geology，2013，167(24)：134-147.
[26]	陈家昊. 节理岩体力学参数估算及尺寸效应研究[硕士学位论文][D]. 上海：上海交通大学，2018.(CHEN Jiahao. Study on mechanical parameters estimation and size effect of jointed rock mass[M. S. Thesis][D]. Shanghai：Shanghai Jiaotong University，2018.(in Chinese))
[28]	TATONE B S A，GRASSELLI G. An investigation of discontinuity roughness scale dependency using high-resolution surface measurements[J]. Rock Mechanics and Rock Engineering，2012，46：657-681.
[30]	JOHANSSON F. Influence of scale and matedness on the peak shear strength of fresh，unweathered rock joints[J]. International Journal of Rock Mechanics and Mining sciences，2016，82(1)：36-47.
[1]	刘宝琛，张家生，杜奇中，等. 岩石抗压强度的尺寸效应[J]. 岩石力学与工程学报，1998，17(6)：611-614.(LIU Baochen，ZHANG Jiasheng，DU Qizhong，et al. A study of size effect for compression strength of rock[J]. Chinese Journal of Rock Mechanics and Engineering，1998，17(6)：611-614.(in Chinese))
[4]	SANEI M，FARAMARZI L，FAHIMIFAR A，et al. Shear strength of discontinuities in sedimentary rock masses based on direct shear tests[J]. International Journal of Rock Mechanics and Mining Sciences，2015，75：119-131.
[7]	LIANG Z Z，WU N，LI Y C，et al. Numerical study on anisotropy of the representative elementary volume of strength and deformability of jointed rock masses[J]. Rock Mechanics and Rock Engineering，2019，52：4 387-4 402.
[9]	吴琼，唐辉明，王亮清，等. 基于三维离散元仿真试验的复杂节理岩体力学参数尺寸效应及空间各向异性研究[J]. 岩石力学与工程学报，2014，33(12)：2 419-2 432.(WU Qiong，TANG Huiming，WANG Liangqing，et al. Three-dimensional distinct element simulation of size effect and spatial anisotropy of mechanical parameters of jointed rock mass[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(12)：2 419-2 432.(in Chinese))
[11]	ESMAIELI K，HADJIGEORGIOU J，GRENON M. Estimating geometrical and mechanical REV based on synthetic rock mass models at Brunswick mine[J]. International Journal of Rock Mechanics and Mining Sciences，2010，47(6)：915-926.
[14]	GAO F，STEAD D，KANG H. Numerical investigation of the scale effect and anisotropy in the strength and deformability of coal[J]. International Journal of Coal Geology，2014，136：25-37.
[17]	黄曼，夏才初，马成荣，等. 系列尺度岩体结构面形貌渐进覆盖统计方法[J]. 岩石力学与工程学报，2019，38(8)：1 533-1 541. (HUANG Man，XIA Caichu，MA Chengrong，et al. A progressive coverage statistical method for series scale surface morphology of rock joints[J]. Chinese Journal of Rock Mechanics and Engineering，2019，38(8)：1 533-1 541.(in Chinese))
[24]	ZHOU J R，WEI J，YANG T H，et al. Damage analysis of rock mass coupling joint，water and microseismicity[J]. Tunnelling and Underground Space Technology，2018，71：366-381.
[27]	葛云峰，唐辉明，王亮清，等. 天然岩体结构面粗糙度各向异性、尺寸效应、间距效应研究[J]. 岩土工程学报，2016，38(1)：170-179.(GE Yunfeng，TANG Huiming，WANG Liangqing，et al. Anisotropy，scale and interval effects of natural rock discontinuity surface roughness[J]. Chinese Journal of Geotechnical Engineering，38(1)：170-179.(in Chinese))
[25]	杨圣奇. 裂隙岩石力学特性研究及时间效应分析[M]. 北京：科学出版社，2011：57-85.(YANG Shengqi. Analysis of fissure rock mechanical properties and time effects[M]. Beijing：Science Press，2011：57-85.(in Chinese))