[15] |
BAHAADDINI M, HAGAN P C,MITRA R,et al. Scale effect on the shear behaviour of rock joints based on a numerical study[J]. Engineering Geology,2014,81:212-223.
|
[2] |
陈云飞,张 鹏,黄波林,等. 考虑岩体劣化的库岸典型危岩体破坏过程与长期稳定性分析[J]. 地质力学学报,2022,28(6):938-947.(CHEN Yunfei,ZHANG Peng,HUANG Bolin,et al. Failure process and long-term stability analysis of typical unstable rock mass in the Three Gorges Reservoir area considering rock mass deterioration[J]. Journal of Geomechanics,2022,28(6):938-947.(in Chinese))
|
[3] |
吴晓宾,王 平. 软件Geo-Studio在重庆市巫山县板壁岩W1危岩体稳定性分析应用[J]. 矿产与地质,2019,33(3):535-541.(WU Xiaobin,WANG Ping. Application of Geo-Studio in the stability analysis of W1 dangerous rock body in slate rock belt in Wushan County of Chongqing City[J]. Mineral Resources and Geology,2019,33(3):535-541.(in Chinese))
|
[5] |
BARTON N,CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Rock Mechanics and Rock Engineering,1977,10(1/2):1-54.
|
[7] |
宋磊博,江 权,李元辉,等. 软-硬自然节理的改进JRC-JCS剪切强度公式[J]. 岩土力学,2017,38(10):2 789-2 798.(SONG Leibo,JIANG Quan,LI Yuanhui,et al. Improved JRC-JCS shear strength formula for soft-hard natural joints[J]. Rock and Soil Mechanics,2017,38(10):2 789-2 798.(in Chinese))
|
[9] |
张志飞,黄 曼,唐志成. 估算异性岩石不连续面峰值剪切强度的经验公式[J]. 岩土力学,2023,44(2):507-519.(ZHANG Zhifei,HUANG Man,TANG Zhicheng. Empirical criterion for evaluating the peak shear strength of discontinuity with different joint wall strengths[J]. Rock and Soil Mechanics,2023,44(2):507-519.(in Chinese))
|
[10] |
曹日红,曹 平,林 杭,等. 不同粗糙度的节理直剪颗粒流分析[J]. 岩土力学,2013,34(增2):456-463.(CAO Rihong,CAO Ping,LIN Hang,et al. Particle flow analysis of direct shear tests on joints with different roughness[J]. Rock and Soil Mechanics,2013,34(Supp.2):456-463.(in Chinese))
|
[12] |
ZHAO Y L,ZHANG C S,WANG Y X,et al. Shear-related roughness classification and strength model of natural rock joint based on fuzzy comprehensive evaluation[J]. International Journal of Rock Mechanics and Mining Sciences,2021,137:104550.
|
[17] |
李海波,冯海鹏,刘 博. 不同剪切速率下岩石节理的强度特性研究[J]. 岩石力学与工程学报,2006,25(12):2 435-2 440.(LI Haibo,FENG Haipeng,LIU Bo. Study on strength behaviors of rock joints under different shearing deformation velocities[J]. Chinese Journal of Rock Mechanics and Engineering,2006,25(12):2 435-2 440.(in Chinese))
|
[19] |
沈明荣,张清照. 规则齿型结构面剪切特性的模型试验研究[J]. 岩石力学与工程学报,2010,29(4):713-719.(SHEN Mingrong,ZHANG Qingzhao. Experimental study of shear deformation characteristics of rock mass discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering,2010,29(4):713-719.(in Chinese))
|
[8] |
范 祥,邓志颖,崔志猛,等. 一种新的软-硬节理峰值剪切强度模型[J]. 岩土力学,2021,42(7):1 861-1 870.(FAN Xiang,DENG Zhiying,CUI Zhimeng,et al. A new peak shear strength model for soft-hard joint[J]. Rock and Soil Mechanics,2021,42(7):1 861- 1 870.(in Chinese))
|
[18] |
刘 涛,张 波,吉 锋,等. 阶坎状硬性结构面剪切贯通机制研究[J]. 地质灾害与环境保护,2023,34(1):52-58.(LIU Tao,ZHANG Bo,JI Feng,et al. Study on the penetration mechanism of stepped rock structural lane under shear condition[J]. Journal of geological hazards and environment preservation,2023,34(1):52-58.(in Chinese))
|
[28] |
黄润秋,张倬元,王士天. 高边坡稳定性系统工程地质研究[M]. 成都:成都科技大学出版社,1991:116-121.(HUANG Runqiu,ZHANG Zhuoyuan,WANG Shitian,et al. Systematic engineering geology study of high rock slopes[M]. Chengdu:Publishing House of Chengdu Science and Technology University,1991:116-121.(in Chinese))
|
[20] |
范文臣,曹 平,张 科. 不同压剪应力比作用下节理类岩石材料破坏模式的试验研究[J]. 中南大学学报:自然科学版,2015,46(3):926-932.(FAN Wenchen,CAO Ping,ZHANG Ke. Experiment study on failure style of jointed rock-like material under different compressive-shear stress ratios[J]. Journal of Central South University:Science and Technology,2015,46(3):926-932.(in Chinese))
|
[22] |
焦 峰,许 江,郭保华,等. 充填厚度对岩石节理剪切强度影响的剪切试验研究[J]. 采矿与安全工程学报,2022,39(2):405-412. (JIAO Feng,XU Jiang,GUO Baohua. A shear test study on the influence of filled thickness on the shear strength of rock joints[J]. Journal of mining and safety engineering,2022,39(2):405-412.(in Chinese))
|
[25] |
周扬一,冯夏庭,徐鼎平,等. 含不同胶结充填物的碳酸盐岩层面剪切力学特性试验研究[J]. 岩石力学与工程学报,2016,35(6): 1 161-1 172.(ZHOU Yangyi,FENG Xiating,XU Dingping,et al. Experimental study of the shear behavior of carbonate bedding planes cemented by different materials[J]. Chinese Journal of Rock Mechanics and Engineering,2016,35(6):1 161-1 172.(in Chinese))
|
[27] |
杨忠平,向宫固,赵 茜,等. 水动力-溶蚀作用下灰岩结构面剪切力学特性[J]. 岩土工程学报,2023,45(8):1 555-1 563.(YANG Zhongping,XIANG Gonggu,ZHAO Qian,et al. Shear mechanical properties of limestone structural plane under hydrodynamic-dissolution[J]. Chinese Journal of Geotechnical Engineering,2023,45(8):1 555-1 563.(in Chinese))
|
[30] |
雷 鹏. 硬性接触型岩体结构面剪切特性及边坡稳定性分析[硕士学位论文][D]. 重庆:重庆大学,2015.(LEI Peng. Analysis on shear properties of through discontinuity and stability of slope with through discontinuity[M. S. Thesis][D]. Chongqing:Chongqing University,2015.(in Chinese))
|
[32] |
中华人民共和国国家标准编写组. GB/T 50266—2013工程岩体试验方法标准[S]. 北京:中国计划出版社,2013.( The National Standards Compilation Group of the People's Republic of China. GB/T 50266—2013 Standard for test methods of engineering rock mass[S]. Beijing:China Planning Press,2013.(in Chinese))
|
[6] |
夏才初,唐志成,宋英龙,等. 节理峰值剪切位移及其影响因素分析[J]. 岩土力学,2011,32(6):1 654-1 658.(XIA Caichu,TANG Zhicheng,SONG Yinglong,et al. Analysis of relationship between joint peak shear displacement and its influence factors[J]. Rock and Soil Mechanics,2011,32(6):1 654-1 658.(in Chinese))
|
[16] |
顾琳琳,王 振,张 锋,等. 剪切条件下结构面剪切速率依存性的动态演化[J]. 中南大学学报,2021,28(6):1 875-1 887.(GU Linlin,WANG Zhen,ZHANG Feng,et al. Dynamic evolution of shear rate-dependent behavior of rock discontinuity under shearing condition[J]. Journal of Central South University,2021,28(6):1 875-1 887.(in Chinese))
|
[26] |
黄润秋,林 峰,陈德基,等. 岩质高边坡卸荷带形成及其工程性状研究[J]. 工程地质学报,2001,(3):227-232.(HUANG Runqiu,LIN Feng,CHEN Deji,et al. Formation mechanism of unloading fracture zone of high slopes and its engineering behaviors[J]. Journal of Engineering Geology,2001,(3):227-232.(in Chinese))
|
[4] |
PATTON F D. Multiple modes of shear failure in rock[C]// Proceeding of the Congress of 1st International Society of Rock Mechanics. [S. l.]:[s. n.],1966:509-513.
|
[14] |
刘新荣,许 彬,周小涵,等. 软硬互层岩体结构面宏细观剪切力学特性[J]. 煤炭学报,2021,46(9):2 895-2 909.(LIU Xinrong,XU Bin,ZHOU Xiaohan,et al. Investigation on the macro-meso shear mechanical properties of soft-hard interbedded rock discontinuity[J]. Journal of China Coal Society,2021,46(9):2 895-2 909.(in Chinese))
|
[24] |
何 刘,赵志明,潘 岳,等. 连续充填型结构面峰前循环破坏特征及再载强度特性试验研究[J]. 岩石力学与工程学报,2021,40(10):2 027-2 037.(HE Liu,ZHAO Zhiming,PAN Yue,et al. Experimental study on the damage properties and reloading strength characteristics of continuous infilled rock joints under pre-peak cyclic loading[J]. Chinese Journal of Rock Mechanics and Engineering,2021,40(10):2 027-2 037.(in Chinese))
|
[34] |
杨忠平,李 进,刘浩宇,等. 土石混合体-基岩界面剪切力学特性块石尺寸效应[J]. 岩土力学,2023,44(4):965-974.(YANG Zhongping,LI Jin,LIU Haoyu,et al. Influence of the block stone size on shear mechanical behavior of soil-rock mixture-bedrock interface[J]. Rock and Soil Mechanics,2023,44(4):965-974.(in Chinese))
|
[1] |
YIN Y P,WANG L Q,HUANG B L,et al. Evolution analysis of the Banbiyan dangerous rock mass in the three gorges reservoir area[J]. Georisk,2023,17: 376-386.
|
[11] |
黄 曼,洪陈杰,杜时贵,等. 岩石结构面形貌分级方法及两级粗糙特性研究[J]. 岩石力学与工程学报,2020,39(6):1 153-1 164. (HUANG Man,HONG Chenjie,DU Shigui,et al. Study on morphological classification method and two-order roughness of rock joints[J]. Chinese Journal of Rock Mechanics and Engineering,2020,39(6):1 153-1 164.(in Chinese))
|
[21] |
LU Y L,WANG L G,LI Z L,et al. Experimental study on the shear behavior of regular sandstone joints filled with cement grout[J]. Rock Mechanics and Rock Eengineering,2017,50:1 321-1 336.
|
[31] |
罗战友,黄 斌,杜时贵,等. 基于形貌全覆盖的岩石结构面抗剪强度尺寸效应试验研究[J]. 岩石力学与工程学报. https://kns.cnki. net/kcms2/detail/42.1397.O3.20230619.1133.002.html.(LUO Zhanyou,HUANG Bin,DU Shigui,et al. Experimental study on size effect of shear strength of rock joint[J]. Chinese Journal of Rock Mechanics and Engineering. https:// kns.cnki.net/kcms2/detail/42.1397.O3.20230619. 1133.002.html.(in Chinese))
|
[13] |
刘新荣,许 彬,黄俊辉,等. 多形态贯通型岩体结构面宏细观剪切力学行为研究[J]. 岩土工程学报,2021,43(3):406-415.(LIU Xinrong,XU Bin,HUANG Junhui,et al. Macro-meso shear mechanical behaviors of coalescent rock joints with different morphologies[J]. Chinese Journal of Geotechnical Engineering,2021,43(3):406-415. (in Chinese))
|
[23] |
许 江,雷 娇,刘义鑫,等. 充填物性质影响结构面剪切特性试验研究[J]. 岩土力学,2019,40(11):4 129-4 137.(XU Jiang,LEI Jiao,LIU Yixin,et al. Experimental study on shear behavior of joints filled with different materials[J]. Rock and Soil Mechanics,2019,40(11):4 129-4 137.(in Chinese))
|
[33] |
杨忠平,蒋源文,李诗琪,等. 土石混合体-基岩界面剪切力学特性试验研究[J]. 岩土工程学报,2020,42(10):1 947-1 954.(YANG Zhongping,JIANG Yuanwen,LI Shiqi,et al. Experimental study on shear mechanical properties of soil-rock mixture-bedrock interface[J]. Chinese Journal of Geotechnical Engineering,2020,42(10):1 947-1 954.(in Chinese))
|
[29] |
黄波林,殷跃平,李 滨,等. 三峡工程库区岩溶岸坡岩体劣化及其灾变效应[J]. 水文地质工程地质,2020,47(4):51-61.(HUANG Bolin,YIN Yueping,LI Bin,et al. Rock mass deterioration and its catastrophic effect of karst bank slope in the Three Gorges Project Reservoir area[J]. Hydrogeology and engineering geology,2020,47(4):51-61.(in Chinese))
|