滑坡运动冲击破碎物理模型试验研究#br#

doi:10.13722/j.cnki.jrme.2019.0850

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (727 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The impacting fragmentation of high-speed rock landslides has a great influence on the motion characteristics，and the rapid dissipation of energy and the instantaneous change of the movement performance in the process of movement lead to an expansion of the affected area. Physical modeling tests were conducted with heaves to simulate multiple consecutive impacting between landslide mass and external uneven ground surface，and different quantities of unit test blocks with different material compositions and ratios were used in the tests to investigate the influence of the particle size and the volume of the block on the kinetic characteristics of the rock landslide movement. A high-frequency camera and digital cameras were used to record the whole motion process. The test results show that the overall time of the movement increased with the decreasing particle size and the increasing volume of the block. Moreover，the accumulation time was the controlling factor of the overall movement time. It is also shown that both the average velocity of the movement process and the velocity at the exit reduced with the decreasing particle size while changed insignificantly with the volume of the block/the number of unit blocks within 1 m/s. The energy dissipation caused by impacting fragmentation accounted for a small proportion of the total potential energy，but the impacting fragmentation was an important factor of energy dissipation during rock landslide movement and controlled the motion characteristics and energy dissipation mode of the landslide body.

Key words： slope engineering')" href="#">

slope engineering landslides impacting fragmentation physical modeling test energy dissipation ')" href="#">impacting mode

	Service

	E-mail this article slope engineering;landslides;impacting fragmentation;physical modeling test;energy dissipation;impacting mode ”. Please open it by linking:http://rockmech.whrsm.ac.cn/EN/abstract/abstract31136.shtml" name="neirong">
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHOU Yue1
	LIAO Haimei2
	GAN Binrui1
	CHENG Mingliang2
	ZHOU Jiawen1

Cite this article:

ZHOU Yue1,LIAO Haimei2,GAN Binrui1, et al. Physical modeling test on impacting fragmentation during landslide moving #br#[J]. , 2020, 39(4): 726-735.

URL:

http://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2019.0850 OR http://rockmech.whrsm.ac.cn/EN/Y2020/V39/I4/726

[5]	黄润秋. 中国西部地区典型岩质滑坡机制研究[J]. 第四纪研究，2003，23(6)：640-647.(HUANG Runqiu. Study on the mechanism of typical rock landslides in Western China[J]. Quaternary Sciences，2003，23(6)：640-647.(in Chinese))
[10]	殷跃平. 汶川八级地震滑坡高速远程特征分析[J]. 工程地质学报，2009，17(2)：153-166.(YIN Yueping. Rapid and long run-out features of landslides triggered by the Wenchuan earthquake[J]. Journal of Engineering Geology，2009，17(2)：153-166.(in Chinese))
[6]	刘涌江. 大型高速岩质滑坡流体化理论研究[J]. 岩石力学与工程学报，2003，22(1)：170.(LIU Yongjiang. Study on fluidifying theory of large highspeed rockslide[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(1)：170.(in Chinese))
[27]	HAUG Ø T，ROSENAU M，LEEVER K，et al. Modelling fragmentation in rock avalanches[M].[S. l.]：Springer，2014：93-100.
[2]	黄润秋. 20世纪以来中国的大型滑坡及其发生机制[J]. 岩石力学与工程学报，2007，26(3)：433-454.(HUANG Runqiu. Large-scale landslides and their sliding mechanisms in China since the 20th century[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(3)：433-454.(in Chinese))
[8]	杨铁. 唐家山高速滑坡滑动及堵江机制研究[博士学位论文][D].成都：西南交通大学，2010.(YANG Tie. Research on the sliding and blocking mechanism of Tangjiashan high-speed landslide[Ph. D. Thesis][D]. Chengdu：Southwest Jiaotong University，2010.(in Chinese))
[12]	王玉峰，许强，程谦恭，等. 复杂三维地形条件下滑坡-碎屑流运动与堆积特征物理模拟实验研究[J]. 岩石力学与工程学报，2016，35(9)：1 776-1 791.(WANG Yufeng，XU Qiang，CHENG Qiangong，et al. Experimental study on the propagation and deposit features of rock avalanche along 3D complex topography[J]. Chinese Journal of Rock Mechanics and Engineering，2016，35(9)：1 776- 1 791.(in Chinese))
[14]	张明，殷跃平，吴树仁，等. 高速远程滑坡-碎屑流运动机制研究发展现状与展望[J]. 工程地质学报，2010，18(6)：805-817. (ZHANG Ming，YIN Yueping，WU Shuren，et al. Development status and prospects of studies on kinematics of long runout rock avalanches[J]. Journal of Engineering Geology，2010，18(6)：805-817.(in Chinese))
[17]	DE BLASIO F V，CROSTA G B. Simple physical model for the fragmentation of rock avalanches[J]. Acta Mechanica，2014，225(1)：243-252.
[20]	DAVIES T R，MCSAVENEY M J. The role of rock fragmentation in the motion of large landslides[J]. Engineering Geology，2009，109(1)：67-79.
[22]	LO C M，LIN M L，TANG C L，et al. A kinematic model of the Hsiaolin landslide calibrated to the morphology of the landslide deposit[J]. Engineering Geology，2011，123(1/2)：22-39.
[24]	HOU T X，XU Q，YANG X G，et al. Experimental study of the fragmentation characteristics of brittle rocks by the effect of a freefall round hammer[J]. International Journal of Fracture，2015，194(2)：169-185.
[21]	DAVIES T R，MCSAVENEY M J. Runout of dry granular avalanches[J]. Canadian Geotechnical Journal，1999，36(36)：313-320.
[1]	HIGHLAND L，BOBROWSKY P. The landslide handbook—a guide to understanding landslides：a landmark publication for landslide education and preparedness[M]. Reston：US Geological Survey，2008：4 - 26.
[3]	程谦恭，张倬元，黄润秋. 高速远程崩滑动力学的研究现状及发展趋势[J]. 山地学报，2007，(1)：72-84.(CHENG Gongqian，ZHANG Zhuoyuan，HUANG Runqiu. Research status and development trend of long-runout rockfalls[J]. Mountain Research，2007，(1)：72-84.(in Chinese))
[4]	QI S C. Numerical investigation for slope stability of expansive soils and large strain consolidation of soft soils[Ph. D. Thesis][D]. Ottawa：Université d'Ottawa/University of Ottawa，2017.
[13]	WANG Y F，CHENG Q G，LIN Q W，et al. Insights into the kinematics and dynamics of the Luanshibao rock avalanche(Tibetan Plateau，China) based on its complex surface landforms[J]. Geomorphology，2018，317：170-183.
[15]	张明，王正波，孙琳. 滑坡碎屑流高速远程机制环剪试验研究[J]. 岩石力学与工程学报，2016，35(增1)：2 673-2 681.(ZHANG Ming，WANG Zhengbo，SUN Lin. Research on rapid and long-runout mechanisms of rockslide debris using ring shear tests[J]. Chinese Journal of Rock Mechanics and Engineering，2016，35(Supp.1)：2 673-2 681.(in Chinese))
[16]	郝明辉，许强，杨兴国，等. 高速滑坡-碎屑流颗粒反序试验及其成因机制探讨[J]. 岩石力学与工程学报，2015，34(3)：472-479. (HAO Minghui，XU Qiang，YANG Xingguo，et al. Physical modeling tests on inverse grading of particles in high speed landslide debris[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(3)：472-479.(in Chinese))
[18]	LI X F，LI H B，ZHANG Q B，et al. Dynamic fragmentation of rock material：characteristic size，fragment distribution and pulverization law[J]. Engineering Fracture Mechanics，2018，199：739-759.
[11]	ZHOU J W，CUI P，YANG X G. Dynamic process analysis for the initiation and movement of the Donghekou landslide-debris flow triggered by the Wenchuan earthquake[J]. Journal of Asian Earth Sciences，2013，76：70-84.
[23]	GIACOMINI A，BUZZI O，RENARD B，et al. Experimental studies on fragmentation of rock falls on impact with rock surfaces[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(4)：708-715.
[25]	NOCILLA N，EVANGELISTA A，SANTOLO A S D. Fragmentation during rock falls：two italian case studies of hard and soft rocks[J]. Rock Mechanics and Rock Engineering，2009，42(5)：815-833.
[7]	罗刚，胡卸文，付建康，等. 高速岩质滑坡碰撞碎裂机制物理实验研究[J]. 工程地质学报，2017，25(6)：1 527-1 536.(LUO Gang，HU Shuwen，FU Jiankang，et al. Physical experiment on collision fragmentation mechanism of high-speed rockslide[J]. Journal of Engineering Geology，2017，25(6)：1 527-1 536.(in Chinese))
[9]	CAO Y B，DAI F C，XU C，et al. Discrete element simulation of deformation and movement mechanism for Tangjiashan landslide[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30：2 878-2 887.
[19]	DAVIES T R，MCSAVENEY M J. Dynamic simulation of the motion of fragmenting rock avalanches[J]. Canadian Geotechnical Journal，2002，39(4)：789-798.
[26]	DE BLASIO F V. Dynamical stress in force chains of granular media traveling on a bumpy terrain and the fragmentation of rock avalanches[J]. Acta Mechanica，2011，221(3/4)：375-382.