节理峰值抗剪强度试验研究

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (641 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The three-dimensional morphology of a rock joint have a great impact on its shear behavior. In order to study ofrelationship between the three-dimensional morphology characteristics and peak shear strength of rock joints，fresh tensile rock joints of granite and sandstone are prepared anddirect shear tests are carried out under different constant norm loads. The morphology of each jointwas measured before the direct shear tests.The three-dimensional morphological parameters of each joint were calculated. Then，by analyzing the test results，a new peak shear strength criterion of rock joints is proposed using twothree-dimensional morphological parameters which are termed as the maximum apparent dip angle and a roughness parameter C. Direct shear test data of tensile rock joints collected from Grasselli are used to further verify the proposed criterion. A comparison among the new criterion，Grasselli’s criterion and Xia?s criterion are made from the perspective of both the rationality of the formula and the prediction accuracy for the 50 groups of joints. It turn out that the new criterion have some advantages in predicting peak shear strength of rock joints.

Key words： rock joint peak shear strength direct shear test 3-D morphology

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

https://rockmech.whrsm.ac.cn/EN/Y2015/V34/I5/884

[1] PATTON F D. Multiple modes of shear failure in rock[C]// Proceedings of the 1st ISRM Congress.Lisbon，Portugal：[s.n.]，1966：509–513. [2] LADANYI B，ARCHAMBAULT G. Simulation of shear behavior of a jointed rock mass[C]// Proceedings of the 11th US Symposium on Rock Mechanics(USRMS). Berkeley，California，1969：105–125. [3] BARTON N. Review of a new shear-strength criterion for rock joints[J]. Engineering geology，1973，7(4)：287–332. [4] BARTON N，CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Rock mechanics，1977，10(1–2)：1–54. [5] SCHNEIDER H J. The friction and deformation behaviour of rock joints[J]. Rock mechanics，1976，8(3)：169–184. [6] PLESHA M E. Constitutive models for rock discontinuities with dilatancy and surface degradation[J]. International Journal for Numerical and Analytical Methods in Geomechanics，1987，11(4)：345–362. [7] MAKSIMOVIC M. New description of the shear strength for rock joints[J]. Rock mechanics and rock engineering，1992，25(4)：275–284. [8] KULATILAKEP，SHOU G，HUANG TH，et al. New peak shear strength criteria for anisotropic rock joints[J]. International journal of rock mechanics and mining sciences &geomechanics abstracts. 1995，32(7)：673–697. [9] ZHAO J. Joint surface matching and shear strength part B：JRC-JMC shear strength criterion[J]. International Journal of Rock Mechanics and Mining Sciences，1997，34(2)：179–185. [10] 沈明荣，张清照. 规则齿型结构面剪切特性的模型试验研究[J]. 岩石力学与工程学报，2010，29(4)：713–719. [11] SHEN M R，ZHANG Q Z. Experimental study of shear deformation characteristics of rock mass discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(4)：713–719.(in Chinese)) [12] 李海波，冯海鹏，刘博. 不同剪切速率下岩石节理的强度特性研究[J]. 岩石力学与工程学报，2006，25(12)：2 435–2 440.(LI Haibo，FENG Haipeng，LIU Bo.Study on strength behaviors of rock joints under different shearing deformation velocities[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(4)：713–719.(in Chinese)) [13] HSIUNG SM，GHOSH A，AHOLA M P，et al. Assessment of conventional methodologies for joint roughness coefficient determination[J]. International journal of rock mechanics and mining sciences &geomechanics abstracts，1993，30(7)：825–829. [14] TURK N，GREIG M J，DEARMAN W R，et al. Characterization of rock joint surfaces by fractal dimension[C]. The 28th US Symposium on Rock Mechanics(USRMS)，Balkema，Boston，1987：1 223–1 236. [15] LEE Y H，CARR J R，BARR D J，et al. The fractal dimension as a measure of the roughness of rock discontinuity profiles[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1990，27(6)：453–464. [16] HE P X，PARISEAU W G. Fractal estimation of joint roughness coefficients. Sci. China Series. B 1994，37(12)：1 269–75. [17] TSE R，CRUDEN D M. Estimating joint roughness coefficients[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1979，16(5)：303–307. [18] REEVES M J. Rock surface roughness and frictional strength[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts.，1985，22(6)：429–442. [19] XIA C C，TANG Z C，XIAO W M，et al. New peak shear strength criterion of rock joints based on quantified surface description[J]. Rock Mechanics and Rock Engineering，2014，47(2)：387–400. [20] GENTIER S，RISS J，ARCHAMBAULT G，et al. Influence of fracture geometry on sheared behavior[J]. International Journal of Rock Mechanics and Mining Sciences，2000，37(1)：161–174. [21] 曹平，范祥，蒲成志，等. 节理剪切试验及其表面形貌特征变化分析[J]. 岩石力学与工程学报，2011，30(3)：480–485.(CAO Ping，FAN Xiang，PU Chengzhi，et al. Shear test of jointand analysis of morphology characteristic evolution of joint surface[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(3)：480–485. (in Chinese)) [22] BELEM T，HOMAND-ETIENNE F，SOULEY M. Quantitative parameters for rock joint surface roughness[J]. Rock mechanics and rock engineering，2000，33(4)：217–242. [23] HOMAND F，BELEMT T，SOULEY M. Friction and degradation of rock joint surfaces under shear loads[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2001，25(10)：973–999. [24] GRASSELLI G.Shear strength of rock joints based on quantified surface description[Ph. D. Thesis][D]. 2001，Lausanne，Switzerland：Swiss Federal Institute of Technology [25] GRASSELLI G，WIRTH J，EGGER P. Quantitative three-dimensional description of a rough surface and parameter evolution with shearing[J]. International Journal of Rock Mechanics and Mining Sciences，2002，39(6)：789–800. [26] GRASSELLIA G，EGGER P. Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(1)：25–40. [27] 唐志成，夏才初，宋英龙，等. Grasselli节理峰值抗剪强度公式再探[J]. 岩石力学与工程学报，2012，31(2)：356–364.(TANG Zhicheng，XIA Caichu，SONG Yinglong，et al. Discussion about Grasselli’s peak shear strength criterion for rock joints[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(2)：356–364. (in Chinese)) [28] JING L. Numerical modeling of jointed rock masses by distinctelement method for two and three-dimensional problems[Ph. D. Thesis][D].1990，Sweden，Lulea：Lulea University of Technology. [29] SON B K，LEE Y K，LEE C I. Elasto-plastic simulation of a direct shear test on rough rock joints[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41：354–359.