|
|
|
| Effects of microstructure and micro parameters on macro mechanical properties and failure of rock |
| ZHANG Guokai1，2，LI Haibo1，2，XIA Xiang1，LI Junru1，LI Xiaofeng1，SONG Tao1 |
(1. State Key Laboratory of Geomechanics and Geotechnical Engineering，Institute of Rock and Soil Mechanics，Chinese Academy
of Sciences，Wuhan，Hubei 430071，China；2. University of Chinese Academy of Sciences，Beijing 100049，China) |
|
|
|
|
Abstract Clump and cluster models based on two-dimensional particle flow code(PFC2D) were constructed through two different algorithms to explore the effects of micro parameters and microstructure(crystal grain size and distribution，pre-existing cracks) on the macro mechanical properties of specimen and to quantify the relationships between them. Meanwhile，the development of micro cracks and the mechanism of micro failure were studied. It was revealed that two algorithms had their own advantages. Macro mechanical properties of marked circular region algorithm changed with the variation of micro parameters nicely. The composition of crystalline gradation was better controlled by the searching algorithm. The uniaxial compressive strength(UCS) and the tensile strength(TS) are in exponential relationship with the clump radius and un-bonded ratio(random pre-existing cracks) and are in power relationship with the bond strength ratio. The elastic modulus and Poisson?s ratio are in linear relationship with the clump radius，bond strength ratio and un-bonded ratio. With the increase of the clump radius，bond strength ratio，bond strength ratio n of cluster and un-bonded ratio，the ratio of uniaxial compressive strength to tensile strength which is mostly affected by bond strength ratio increases a lot. The ratio of tensile cracks is mostly affected by the bond strength ratio，followed by the clump radius. Under the uniaxial compression，the failure of specimen is dominated by the tensile cracks which mainly extend along the axial direction. However，the angle between the dominant orientation of shear cracks and axis is 20 degree to 40 degree. Brazil test failure is dominated by tensile cracks across the center of specimen. The evolution of micro cracks and failure modes are different for cluster and clump models. Compared with the cluster model，the shear crack ratio of clump model is bigger and crack crushing zone is wider. Moreover，the fracture surface is more rough and uneven.
|
|
|
|
|
|
[1] POTYONDY D O，CUNDALL P A. A bonded-particle model for rock[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(8)：1 329–1 364.
[2] GAO F Q，STEAD D. The application of a modified Voronoi logic to brittle fracture modelling at the laboratory and field scale[J]. International Journal of Rock Mechanics and Mining Sciences，2014，68(6)：1–14.
[3] CHO N，MARTIN C D，SEGO D C. A clumped particle model for rock[J]. International Journal of Rock Mechanics and Mining Sciences，2007，44(7)：997–1 010.
[4] CUNDALL P A，STRACK O D L. A discrete numerical model for granular assemblies[J]. Géotechnique，1979，29(1)：47–65.
[5] TRENT B C，MARGOLIN L G. A numerical laboratory for granular solids[J]. Engineering computations，1992，9(2)：191–197.
[6] 蒋明镜，陈 贺，张 宁，等. 含双裂隙岩石裂纹演化机理的离散元数值分析[J]. 岩土力学，2014，35(11)：3 259–3 268.(JIANG Mingjing，CHEN He，ZHANG Ning，et al. Distinct element numerical analysis of crack evolution in rocks containing pre-existing double flaw[J]. Rock and Soil Mechanics，2014，35(11)：3 259–3 268.(in Chinese))
[7] YOON J. Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation[J]. International Journal of Rock Mechanics and Mining Sciences，2013，44(6)：871–889.
[8] HAZZARD J F，PAUL Y R，MAXWELL S C. Micromechanical modeling of cracking and failure in brittle rocks[J]. Journal of Geophysical Research Solid Earth，2000，105(B7)：16 683–16 697.
[9] YANG B，JIAO Y，LEI S. A study on the effects of micro parameters on macro properties for specimens created by bonded particles[J]. Engineering Computations，2006，23(5/6)：607–631.
[10] 周维垣. 高等岩石力学[M]. 北京：水利电力出版社，1990：422–432.(ZHOU Weiyuan. Advanced rock mechanics[M]. Beijing：China Water Resources and Electric Power Press，1990：422–432.(in Chinese))
[11] LEE H，JEON S. An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression[J]. International Journal of Solids and Structures，2011，48(6)：979–999.
[12] YOON J S，ZANG A，STEPHANSSON O. Simulating fracture and friction of Aue granite under confined asymmetric compressive test using clumped particle model[J]. International Journal of Rock Mechanics and Mining Sciences，2012，49(1)：68–83.
[13] 夏 明，赵崇斌. 簇平行黏结模型中微观参数对宏观参数影响的量纲研究[J]. 岩石力学与工程学报，2014，33(2)：327–338.(XIA Ming，ZHAO Chongbin. Dimensional analysis of effects of microscopic parameters on macroscopic parameters for clump parallel-bond model[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(2)：327–338.(in Chinese))
[14] Itasca Consulting Group Inc.. PFC2D(particle flow code in 2 dimensions) theory and background[R]. Minnesota，USA：Itasca Consulting Group Inc.，2002.
[15] LI L，HOLT R M. Particle Scale reservoir mechanics[J]. Oil and Gas Science and Technology，2002，57(5)：525–538.
[16] CHENG Y P，NAKATA Y，BOLTON M D. Discrete element simulation of crushable soil[J]. Geotechnique，2003，53(7)：633–641.
[17] GHAZVINIAN E. Modelling and testing strategies for brittle fracture simulation in crystalline rock samples[M. S. Thesis]. Kingston，Ontario：Queen?s University，2010.
[18] MAHMUTOGLU Y. Mechanical behaviour of cyclically heated fine grained rock[J]. Rock Mechanics and Rock Engineering，1998，31(3)：169–179.
[19] SCHÖPFER M P J，ABE S，CHILDS C，et al. The impact of porosity and crack density on the elasticity，strength and friction of cohesive granular materials：Insights from DEM modelling[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(2)：250–261.
[20] FENG X Q，YU S W. Micromechanical modelling of tensile response of elastic-brittle materials[J]. International Journal of Solids and Structures，1995，32(22)：3 359–3 372.
[21] POTYONDY D O. Simulating stress corrosion with a bonded-particle model for rock[J]. International Journal of Rock Mechanics and Mining Sciences，2007，44(5)：677–691.
[22] MOON T，NAKAGAWA M，BERGER J. Measurement of fracture toughness using the distinct element method[J]. International Journal of Rock Mechanics and Mining Sciences，2007，44(3)：449–456.
[23] 张国凯，李海波，夏 祥，等. 岩石波速与损伤演化规律研究[J]. 岩石力学与工程学报，2015，34(11)：2 270–2 277.(ZHANG Guokai，LI Haibo，XIA Xiang，et al. Wave velocity and damage development of rock[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(11)：2 270–2 277.(in Chinese)) |
|
|
|
2016, Vol. 35 
