地面出入式盾构法隧道施工同步注浆工程应用研究

doi:10.13722/j.cnki.jrme.2015.1531

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1480 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The traditional methods of shield tunnel construction bring about a large amount of problems such as structure demolition and severe traffic congestion in the process of construction. The construction technique of ground pass shield tunneling(GPST) method applied in the Nanjing airport line was investigated. Soil pressure，pore water pressure，horizontal displacement and vertical settlement were monitored in the construction site. The monitored results were analyzed for three different load cases such as the shallow overburden area，the super shallow overburden area and the negative overburden area. The reasonable and effective grouting parameters were presented. The results show that there is a relationship between the depth of the overburden soil and the soil pressure of the area affected by the shield tunneling. The right area of the negative overburden soil is mildly affected by the synchronous grouting，while the bottom segments are considerably influenced. The pore water pressure under 0.5D overburden condition has a significant effect when the notch to the first three rings，but the pore water pressure under －0.3D overburden is not obviously affected. The horizontal displacements in soil of the three cases are differently distributed. The less the depth is，the more the displacement is. In the negative and super shallow overburden soil area，the settlement of two sides are not evenly distributed and this may be attributed to the unbalanced stress of the two sides when the tunnel is constructed in the curved segment.

Key words： tunneling engineering ground pass shield tunneling(GPST) synchronous grouting field monitoring grouting parameters soil pressure settlement

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Ang1
	2
	ZHANG Mengxi1
	JIANG Huaqin1
	LIANG Yong2

Cite this article:

GAO Ang1,2,ZHANG Mengxi1, et al. Engineering application of synchronous grouting technology on tunnel construction by ground pass shield tunneling method[J]. , 2016, 35(9): 1871-1883.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2015.1531 OR https://rockmech.whrsm.ac.cn/EN/Y2016/V35/I9/1871

[1] 周文波. 盾构法隧道施工技术及应用[M]. 北京：中国建筑工业出版社，2004：1–65.(ZHOU Wenbo. Shield tunnel construction technology and application[M]. Beijing：China Architecture and Building Press，2004：1–65. (in Chinese))
[2] 刘建航，候学渊. 盾构法隧道[M]. 北京：科学出版社，1991：1–32.(LIU Jianhang，HOU Xueyuan. Shield tunneling method[M]. Beijing：Science Press，1991：1–32.(in Chinese))
[3] 陈馈，洪开荣，吴学松. 盾构施工技术[M]. 北京：人民交通出版社，2009：1–80.(CHEN Kui，HONG Kairong，WU Xuesong. Shield construction technique[M]. Beijing：China Communications Press，2009：1–80.(in Chinese))
[4] 白云，丁志诚. 隧道掘进机施工技术[M]. 北京：中国建筑工业出版社，2008：1–76.(BAI Yun，DING Zhicheng. Construction techniques of tunnel boring machine[M]. Beijing：China Architecture and Building Press，2008：1–76.(in Chinese))
[5] HITONARI F，TETSUYA N，MASAYOSHI I. URUP(ultra rapid under pass) method—the first shield tunneling method for launching and arrival at the ground level[C]// World Tunneling Congress. Budapest，Hungary：ITA，2009：112–116.
[6] TUDOKA T. Construction of M.R.T. Chaloem Ratchamongkhon line underground structures north and Japanese shield tunnel technology[C]// International Symposium on Underground Excavation and Tunneling. Bangkok：[s. n.]，2006：99–130.
[7] 上海隧道工程股份有限公司技术中心. 日本盾构隧道新技术资料汇编[R]. 上海：上海隧道工程股份有限公司技术中心隧道网站，2006. (Technique Center of Shanghai Tunnel Engineering Co.，Ltd.. New technical data assembly of shield tunnel of Japan[R]. Shanghai：Technique Center?s Tunnel Website of Shanghai Tunnel Engineering Co.，Ltd.，2006. (in Chinese))
[8] 赵伟，丁文其，姜弘，等. 新形式超浅埋盾构隧道衬砌内力计算分析研究[C]// 第十二届海峡两岸隧道与地下工程学术与技术研讨会论文. [S. l.]：[s. n.]，2013：451–455.(ZHAO Wei，DING Wenqi，JIANG Hong，et al. The internal force calculation of tunnel lining for the new shape ultra shallow buried tunnel[C]// Proceedings of the 12nd Congress for Tunnel and Underground Engineering Technical Seminar. [S. l.]：[s. n.]，2013：451–455.(in Chinese))
[9] 张银屏. 地面出入式盾构隧道修正惯用法计算参数研究[J]. 隧道建设，2014，(2)：1–5.(ZHANG Yinping. Investigation of corrected usual calculation method for ground access tunnel[J]. Construction of Tunnel，2014，(2)：1–5.(in Chinese))
[10] 吴惠明，周文波，滕丽. 地面出入式盾构法隧道新技术[J]. 隧道建设，2014，34(1)：12–18.(WU Huiming，ZHOU Wenbo，TENG Li. New technical shield method of ground access tunnel[J]. Construction of Tunnel，2014，34(1)：12–18.(in Chinese))
[11] NOMOTO T，IMAMURA S，HAGIWARA T，et al. Shield tunnel construction in centrifuge[J]. Journal of Geotechnical and Geoenvironmental Engineering，1999，125(4)：289–300.
[12] BRASSINGA H E，BEZUIJEN A. Modelling the grouting process around a tunnel lining in a geotechnical centrifuge[C]// Proceedings of the Fifteenth International Conference on Soil Mechanics and Geotechnical Engineering. [S. l.]：[s. n.]，2001：1 455–1 458.
[13] HASHIMOTO T，KONDA T，BRINKMAN J，et al. Simultaneous backfill grouting，pressure development in construction phase in the long-term[C]// Proceedings of The 30th ITA–A ITES World Tunnel Congress. Singapore：[s. n.]，2004：52–59.
[14] 杜军. 盾构隧道壁后注浆探测图像识别及沉降控制研究[博士学位论文][D]. 上海：同济大学，2006.(DU Jun. Study on image identification of grouting distribution behind shield tunnel segment with GPR and settlement control[Ph. D. Thesis][D]. Shanghai： Tongji University，2006.(in Chinese))
[15] 张云，殷宗泽，徐永福. 盾构法隧道引起的地表变形分析[J]. 岩石力学与工程学报，2002，21(3)：388–392.(ZHANG Yun，YIN Zongze，XU Yongfu. Surface deformation analysis caused by shield driven tunnel[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(3)：388–392.(in Chinese))
[16] 戴志仁. 软土地区盾构隧道同步注浆机理与工程应用研究[博士学位论文][D]. 上海：同济大学，2010.(DAI Zhiren. Research on synchronous grouting filling patterns of shield tunnel and applied engineering in soft soil area[Ph. D. Thesis][D]. Shanghai：Tongji University，2010.(in Chinese))
[17] 肖朝昀，张庆贺. 盾尾注浆材料配比试验研究[J]. 长江大学学报，2013，10(5)：107–109.(XIAO Chaoyun，ZHANG Qinghe. Experimental investigation of mixing ratio of shield tail grouting material[J]. Journal of Yangtze University，2013，10(5)：107–109.(in Chinese))
[18] 张细宝，杨新安，郭乐. 控制管片上浮的同步注浆浆液配合比优化[J]. 建筑机械化，2014，35(5)：85–87.(ZHANG Xibao，YANG Xin?an，GUO Le. Optimization of grouting material ratio used for controlling the float of tunnel segment[J]. Construction Machinery，2014，35(5)：85–87.(in Chinese))
[19] 叶飞，毛家骅，纪明，等. 盾构隧道壁后注浆研究现状及发展趋势[J]. 隧道建设，2015，35(8)：739–752.(YE Fei，MAO Jianhua，JI Ming，et al. The development of grouting technology of shield tunnel[J]. Construction of Tunnel，2015，35(8)：739–752.(in Chinese))
[20] 张海波，殷宗泽，朱俊高. 地铁隧道盾构法施工过程中地层变位的三维有限元模拟[J]. 岩石力学与工程学报，2005，24(5)：755–760. (ZHANG Haibo，YIN Zongze，ZHU Jungao. 3D finite element simulation on deformation of soil mass during shield tunneling[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(5)：755–760.(in Chinese))
[21] 魏刚，魏新江，洪杰. 盾构隧道壁后注浆机理及其对周边环境的影响[J]. 防灾减灾工程学报，2010，30(增)：299–304.(WEI Gang，WEI Xinjiang，HONG Jie. Grouting mechanism after wall of Shield tunnel and its influence on the surrounding environment[J]. Journal of Disaster Prevention and Mitigation Engineering，2010，30(Supp.)：299–304.(in Chinese))