煤矿高恒阻大变形锚索受力特性、规律及应用研究

doi:10.13722/j.cnki.jrme.2015.1477

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1466 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To deal with the problems associated with anchor rope support in tunnels with slow and instantaneous large deformation which occurred frequently in coal mines，an appropriate high constant resistance and large deformation anchor rope，which is made of the constant resistance device and anchor body，has been invented based on the oretical analysis，laboratory and field tests. The laboratory test showed that the constant resistance anchor rope provided a constant resistance of 350 kN and the displacement reached 300–950 mm under the static tension，and that the burst resisting force was 280–375 kN under the burst impact dynamic load when the limit elongation was not exceeding 1.6 m. the developed anchor rope displayed the detachment failure instead of breaking failure of traditional anchor rope. Once the anchor rope force exceeded the maximum constant value，the constant resistant cell began to slip. In the slipping stage，the temperature of the constant resistant cell increased rapidly first，then decreased slowly and approached stable finally. The highest working temperature is 35.6°. The external conjugate diameter of the constant resistant cellswasenlarged evenly along its axis，exhibiting a negative Poisson?s ratio. The maximum value of radial expansion is 4.1 mm and the Poisson’s ratio is between －0.5 and －2.0. In the blast impact failure test at backstopping tunnel，the high gas and constant resistance anchor rope entry retaining and the large section cut roof entry retaining，the maximum slipping value of constant resistant cell was 57 mm. The constant anchor rope has the advantage of low temperature，high pretightening force，and large elongation.

Key words： mining engineering high constant resistance and large deformation anchor rope static tensile test dynamic impact test support of tunnel

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Guofeng1
	2
	WANG Eryu1
	2
	XU Liying2

Cite this article:

ZHANG Guofeng1,2,WANG Eryu1, et al. Mechanical characteristics of high constant resistance and large deformation anchor rope in coal mines[J]. , 2016, 35(10): 2033-2043.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2015.1477 OR https://rockmech.whrsm.ac.cn/EN/Y2016/V35/I10/2033

[1] 何满潮，钱七虎. 深部岩体力学基础研究综述[C]// 第九届全国岩石力学与工程学术大会论文集．北京：科学出版社，2006：49–62.(HE Manchao，QIAN Qihu. Summarize of basic research on rock mechanics at greatdepth[C]// Proceedings of the 9th Rock Mechanics and Engineering Conference. Beijing：Science Press，2006：49–62.(in Chinese))
[2] 钱鸣高，石平五. 矿山压力与岩层控制[M]. 徐州：中国矿业大学出版社，2003：65–99.(QIAN Minggao，SHI Pingwu. Ming. pressureand strata control[M]. Xuzhou：China University of Mining and Technology Press，2003：65–99.(in Chinese))
[3] 王襄禹，柏建彪，陈勇. 深井巷道围岩应力松弛效应与控制技    术[J]. 煤炭学报，2010，35(7)：1 072–1 077.(WANG Xiangyu，BAI Jianbiao，CHEN Yong. Stress relaxation effect and control technology in surrounding rock in deep entry[J]. Journal of China Coal Society，2010，35(7)：1 072–1 077.(in Chinese))
[4] 贺虎，窦林名，巩思园. 巷道防冲机理及支护控制研究[J]. 采矿与安全工程学报，2010，27(1)：40–44.(HE Hu，DOU Linming，GONG Siyuan. Mechanism of rockburst prevention and supporting control technology in roadways[J]. Journal of Mining and Safety Engineering，2010，27(1)：40–44.(in Chinese))
[5] 潘一山，肖永惠，李忠华，等. 冲击地压矿井巷道支护理论研究及应用[J]. 煤炭学报，2014，39(2)：222–228.(PAN Yishan，XIAO Yonghui，LI Zhonghua. Study of tunnel support theory of rock burst in coal mine and its application[J]. Journal of China Coal Society，2014，39(2)：222–228.(in Chinese))
[6] 高明仕，张农，窦林名. 基于能量平衡理论的冲击矿压巷道支护参数研究[J]. 中国矿业大学学报，2007，36(4)：426–430. (GAO Mingshi，ZHANG Nong，DOU Linming. Study of roadway support parameters subjected to rock burst based on energy balance theory[J]. Journal of China University of Mining and Technology，2007，36(4)：426–430.(in Chinese))
[7] 王连国，李明远，王学知. 深部高应力软岩巷道锚注支护技术研究[J]. 岩石力学与工程学报，2005，24(16)：2 889–2 893.(WANG Lianguo，LI Mingyuan，WANG Xuezhi. Study on mechanisms and technology for bolting and grouting in special soft rock roadway under high stress[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(16)：2 889–2 893.(in Chinese))
[8] 黄艳利，张吉雄，巨峰. 巷旁充填沿空留巷技术及矿压显现规律[J]. 西安科技大学学报，2009，29(5)：515–520.(HUANG Yanli，ZHANG Jixiong，JU Feng. Technology of roadside packing in gob-side entry retaining and law of rock pressure[J]. Journal of Xi?an University of Science and Technology，2009，29(5)：515–520.(in Chinese))
[9] 张农，张志义，吴海，等. 深井沿空留巷扩刷修复技术及应用[J]. 岩石力学与工程学报，2014，33(3)；468–474.(ZHANG Nong，ZHANG Zhiyi，WU Hai，et al. Technology and application of reparation in deep gob-side entry retaing[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(3)：468–474.(in Chinese))
[10] 华心祝，马俊枫，许庭教. 锚杆支护巷道巷旁锚索加强支护沿空留巷围岩控制机理研究及应用[J]. 岩石力学与工程学报，2005，24(12)：2 107–2 112.(HUA Xinzhu，MA Junfeng，XU Tingjiao. Study on controlling mechanism of surrounding rocks of gob-side entry with combination of roadside reinforced cable supporting and roadway bolt supporting and its application[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(12)：2 107–2 112.(in Chinese))
[11] 高延法，王波，王军. 深井软岩巷道钢管混凝土支护结构性能试验及应用[J]. 岩石力学与工程学报，2010，29(增1)：2 604–      2 609.(GAO Yanfa，WANG Bo，WANG Jun. Test on structural property and application of concrete-filled steel tube support of deep mine and soft rock roadway[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(Supp.1)：2 604–2 609.(in Chinese))
[12] 康红普，牛多龙，张震，等. 深部沿空留巷围岩变形特征与支护技术[J]. 岩石力学与工程学报，2010，29(10)：1 978–1 987. (KANG Hongpu，NIU Duolong，ZHANG Zhen，et al. Deformation characteristic of surrounding rock and supporting technology of gob-side entry retaining in deep coal mine[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(10)：1 978–1 987.(in Chinese))
[13] 康红普，林健，吴拥政. 全断面高预应力强力锚索支护技术及其在动压巷道中的应用[J]. 煤炭学报，2009，34(9)：1 153–1 159. (KANG Hongpu，LIN Jian，WU Yongzheng. High pretensioned stress and intensive cable bolting technology set in full section and application in entry affected by dynamic pressure[J]. Journal of China Coal Society，2009，34(9) ：1 153–1 159.(in Chinese))
[14] 吴拥政，康红普，吴建星，等. 矿用预应力钢棒支护成套技术开发及应用[J]. 岩石力学与工程学报，2015，34(增1)：3 230–        3 236.(WU Yongzheng，KANG Hongpu，WU Jianxing，et al. Development and application of mine prestressed steel bars supporting technology[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(Supp.1)：3 230–3 236.(in Chinese))
[15] 严红，何富连，徐腾飞. 深井大断面煤巷双锚索桁架控制系统的研究与实践[J]. 岩石力学与工程学报，2012，31(11)：2 248–     2 256.(YAN Hong，HE Fulian，XU Tengfei.Study of double-cable- truss controlling system for large section coal roadway of deep mine and its practice[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(11)：2 248–2 256.(in Chinese))
[16] 姚强岭，李波，任松杰. 中空注浆锚索在高地应力松软煤巷中的应用研究[J]. 采矿与安全工程学报，2011，28(2)：198–203. (YAO Qiaoling，LI Bo，REN Songjie. Application of hollow grouted anchor cable in soft coal roadway under high in-situ stress[J]. Journal of Mining and Safety Engineering，2011，28(2)：198–203.(in Chinese))
[17] 刘景书. 鸟窝锚索及高强让压锚杆在冲击性全煤巷道中的应用[J]. 煤矿开采，2010，15(1)：62–64.(LIU Jingshu. Application of nest anchored rope and yielding anchored bolt with high strength in full-coal roadway with bursting liability[J]. Coal Mining Technology，2010，15(1)：62–64.(in Chinese))
[18] 连传杰，徐卫亚，王志华. 一种新型让压管锚杆的变形特性及其支护作用机理分析[J]. 防灾减灾工程学报，2008，28(2)：242–247. (LIAN Chuanjie，XU Weiya，WANG Zhihua. Analysis of deforamtion characteristic and supporting mechanism of a new-typed yielding anchor bolt[J]. Journal of Disaster Prevention and Mitigation Engineering，2008，28(2)：242–247.(in Chinese))
[19] 胡传亭，郭爱民，乔理学. 虎溪矿井深部回采巷道变形让压锚杆的应用[J]. 煤炭科学技术，2009，37(8)：18–23.(HU Chuanting，GUO Aimin，QIAO Lixue. Application of deformation and yield bolt to deep mining gateway of Huxi Mine[J]. Coal Science and Technology，2009，37(8)：18–23.(in Chinese))
[20] 赵家巍，柏建彪，卞卡，等. 深井软岩巷道均衡让压控制技术[J]. 煤炭科学技术，2013，41(4)：40–44.(ZHAO Jiawei，BAI Jianbiao，BIAN Ka，et al. Balanced yield control technology of soft rock roadway in deep mine[J]. Coal Science and Technology，2013，41(4)：40–44.(in Chinese))
[21] 柏建彪，王襄禹，贾明魁. 深部软岩巷道支护原理及应用[J]. 岩土工程学报，2008，30(5)：632–635.(BAI Jianbiao，WANG Xiangyu，JIA Mingkui. Theory and application of supporting in deep soft raodway[J]. Chinese Journal of Geotechnical Engineering，2008，30(5)：632–635.(in Chinese))
[22] 罗曼. 软岩巷道能量释放规律与适时支护研究[J]. 采矿技术，2007，7(3)：19–21.(LUO Man. Rule of energy release of tunnel within soft rock and research on support timely[J]. Mining Technology，2007，7(3)：19–21.(in Chinese))
[23] 崔希海，高延法，范庆忠. 巷道围岩最优恒阻支护计算方法[J]. 岩土工程学报，2006，28(5)：674–678.(CUI Xihai，GAO Yanfa，FAN Qingzhong. Optimum calculating method for constant resistant supporting of roadway[J]. Chinese Journal of Geotechnical Engineering，2006，28(5)：674–678.(in Chinese))
[24] 汤雷，王五平. 锚杆支护与围岩共同承载的协调性[J]. 煤炭学报，2004，2(1)：12–16.(TANG Lei，WANG Wuping. Coordination between boltingsupport and surrounding rock affected by ground pressure[J]. Journal of China Coal Society，2004，2(1)：12–16.(in Chinese))
[25] 赵庆彪，侯朝炯，马念杰. 煤巷锚杆–锚索支护互补原理及其设计方法[J]. 中国矿业大学学报，2005，34(4)：490–493.(ZHAO Qingbiao，HOU Chaojiong，MA Nianjie. Suuplementary principle and design method of bolt and cable anchor supporting technique[J]. Journal of China University of Mining and Technology，2005，34(4)：490–493.(in Chinese))
[26] 何满潮，郭志飚. 恒阻大变形锚杆力学特性及其工程应用[J]. 岩石力学与工程学报，2014，33(7)：1 297–1 308.(HE Manchao，GUO Zhibiao. Mechanical property and engineering application of anchor bolt with constant resisitance and large deformation[J]. Chinese Journal of Rock Mechanics and Engineering，2014，31(7)：1 297–1 308.(in Chinese))
[27] 张国锋，于世波，李国峰. 巨厚煤层三软回采巷道恒阻让压互补支护研究[J]. 岩石力学与工程学报，2011，30(8)：1 619–1 626. (ZHANG Guofeng，YU Shibo，LI Guofeng. Research on constant resistance and complementary supporting sysytem of threee soft tertiary gallery[J]. Chinese Journal Rock Mechanics and Engineering，2011，30(8)：1 619–1 626.(in Chinese))
[28] 张国锋. 切顶卸压沿空成巷机理及关键技术研究[博士学位论文][D]. 北京：中国矿业大学，2010.(ZHANG Guofeng. Research on the technical principle of gobe-side entry formed by broken roof caving with pressure relief about the coa face and its engineering application[Ph. D. Thesis][D]. Beijing：China University of Mining and Technology，2010.(in Chinese))