基于单视线向D-InSAR技术提取开采沉陷移动与变形方法研究

doi:10.13722/j.cnki.jrme.2016.0646

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (967 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Current D-InSAR technology cannot fully survey the surface movement and deformation caused by the coal mining. To overcome the weakness，a method of extracting the movement and deformation from a single D-InSAR pair based on the integrated means of theoretical derivation and simulation experiments was proposed. A calculation model of the tilt，horizontal movement，curvature and horizontal deformation in any direction for all pixels by combining the subsidence of the horizontal and gently inclined coal seams and D-InSAR technology was established. The errors of tilt calculation in North-south and east-west directions are ±0.03 mm/m and ±0.02 mm/m respectively. The errors of horizontal movement calculation in north-south and east-west directions are ±1.6 mm and ±1.3 mm respectively. The errors of horizontal deformation calculation in north-south and east-west direction are ±0.04 mm/m and ±0.03 mm/m respectively. The errors of curvature deformation calculation in north-south and east-west directions are ±0.001 mm/m2 and ±0.001 mm/m2 respectively. During the period of 05-01-2012 to16-01-2012，the surface movement and deformation in north-south and east-west directions caused by the mining at workface 9310 in Nantun coal mine were calculated by using the retrieving model of movement and deformation.

Key words： mining engineering D-InSAR probability integral method movement and formation mining subsidence

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Lei1
	2
	ZHANG Xianni1

Cite this article:

WANG Lei1,2,ZHANG Xianni1. Retrieving surface movement and deformation induced by coal mining based on a single D-InSAR pair[J]. , 2017, 36(4): 865-873.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2016.0646 OR https://rockmech.whrsm.ac.cn/EN/Y2017/V36/I4/865

[1] PRZY?UCKA M，HERRERA G，GRANICZNY M，et al. Combination of conventional and advanced D-InSAR to monitor very fast mining subsidence with terraSAR-X Data：Bytom City (Poland)[J]. Remote Sensing，2015，7(5)：5 300–5 328.
[2] 刘晓菲，邓喀中，范洪冬，等. D-InSAR监测老采空区残余变形的试验[J]. 煤炭学报，2014，39(3)：467–472.(LIU Xiaofei，DENG Kazhong，FAN Hongdong，et al. Study of old goaf residual deformation monitoring based on D-InSAR techniques[J]. China Journal of Coal Society，2014，39(3)：467–472.(in Chinese))
[3] 范洪冬，邓喀中，祝传广，等. 基于时序SAR技术的采空区上方高速公路变形监测及预测方法[J]. 煤炭学报，2012，37(11)：1 841– 1 846.(FAN Hongdong，DENG Kazhong，ZHU Chuanguang，et al. Deformation monitoring and prediction methods for expressway above goaf based on time series SAR technique[J]. China Journal of Coal Society，2012，37(11)：1 841–1 846.(in Chinese))
[4] GRAY L. Using multiple RADARSAT InSAR pairs to estimate a full three-dimensional solution for glacial ice movement[J]. Geophysical Research Letters，2011，38(5)：132–140.
[5] WRIGHT TJ，BARRY EP，LU Z. Toward mapping surface deformationin three dimensions using InSAR[J]. Geophysical Research Letters，2004，31：L01607.
[6] HU J，DING X L，LI Z W，et al. Kalman filter based approach for multisensor，multitrack and multitemporal InSAR[J]. IEEE Trans Geosci Remote Sens，2013，51(7)：4 226–4 239.
[7] FIALKO Y，SANDWELL D，SIMONS M，et al. Three-dimensional deformation caused by the Bam，Iran，earthquake and the origin of shallow slip deficit[J]. Nature，2005，435：295–299.
[8] HU J，LI Z W，ZHU J J，et al. Inferring three dimensional surface displacement field by combining SAR interfer ometric phase and amplitude information of ascending and descending orbits[J]. Science China Earth Science，2010，53(4)：550–560.
[9] JUNG H S，LU Z，WON J S，et al. Mapping three dimensional surface deformation by combining multiple-aperture interferometry and conventional interferometry[J]. Application to the June 2007 eruption of Kilauea Volcano，Hawaii. IEEE Geosci Remote Sens Lett，2011，8(1)：34–38.
[10] GUDMUNDSSON S，SIGMUNDSSON F，CARSTENSEN J M. Three dimensional surface motion maps estimated from combined interferometric synthetic aperture radar and GPS data[J]. Journal of Geophysical Research，2002，107(B10)：2 250.
[11] HU J，LI Z W，DING X L，et al. Derivation of 3-D coseismic surface displacement fields for the 2011 Mw 9.0 Tohoku-Oki earthquake from InSAR and GPS measurements[J]. Geophysical Journal International， 2013，192(2)：573–585.
[12] GOURMELEN N， KIM S W，et al. Ice velocity determined using conventional and multiple-aperture InSAR[J]. Earth and Planetary Science Letters，2011，307(1/2)：156–160.
[13] GUGLIELMINO F，BIGNAMI C，et al. Analysis of satellite and in situ ground deformation data integrated by the SISTEM approach：The April 3，2010 earthquake along the Pernicana fault(Mt. Etna-Italy) case study[J]. Earth and Planetary Science Letters，2011，312(3/4)：327–336.
[14] LI Z W，YANG Z F，ZHU J J，et al. Retrieving three-dimensional displacement fields of mining areas from a single InSAR pair[J]. Journal of Geodesy，2015，89：17–32.
[15] 何国清，杨伦，凌赓娣. 矿山开采沉陷学[M]. 徐州：中国矿业大学出版社，1991：167–169.(HE Guoqing，YANG Lun，LING Gengdi. Mining subsidence theory[M]. Xuzhou：China University of Mining and Technology Press，1991：167–169.(in Chinese))
[16] 杨泽发，易辉伟，朱建军，等. 基于InSAR时序形变的矿区全盆地沉降时空演化规律分析[J]. 中国有色金属学报，2016，26(7)： 1 515–1 522.(YANG Zefa，YI Huiwei，ZHU Jianjun，et al. Spatio-temporal evolution law analysis of whole mining subsidence basin based on in SAR-derived time-series deformation[J]. Transactions of Nonferrous Metals Society of China，2016，26(7)： 1 515–1 522.(in Chinese))
[17] FAN H D，CHENG D，DENG K Z，et al. Subsidence monitoring using D-InSAR and probability integral prediction modelling in deep mining areas[J]. Survey Review，2015，47(345)：438–445.