3D打印技术在岩体物理模型力学试验研究中的应用研究与展望

doi:10.13722/j.cnki.jrme.2017.0685

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (2241 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The production of rock/rock mass physical models with defects or complex geological structure has been one of the bottlenecks hindering the development of mechanical tests of rock. 3D printing(3DP) technology can create conveniently 3D entities with complex structures，which provides an unprecedented opportunity to break through this bottleneck. In this paper，the model samples with multiple holes and pre-existed cracks are prepared with the powder-gypsum as the printing material. The mechanical tests show that the two models are similar to those of rock materials in characteristics of deformation，failure and strength and in processes of crack extension. The physical models of tunnel with a single fault and the lining with bolts are made by powder gypsum and PLA material. The experimental results of these models show that the existence of faults reduced the stability of tunnels，the support system of bolts and lining improved effectively the bearing capacity of the Chamber and the 3DP tunnel model simulate nicely the failure process of the tunnel. Moreover，a new method that combines 3D optical scanning and 3DP to prepare models with natural joint surface is presented. The proposed method replicated well the morphological features of natural joints，and the shear properties and failure characteristics are stable and consistent. In conclusion，the preliminary mechanical tests above have proved the feasibility of 3DP technique in the experimental study of rock mechanics. In the final part of the article，the broad prospect of 3DP technology in rock engineering was discussed.

Key words： rock mechanics 3D printing technology similar material physical model containing defects tunnel physical model natural joint model

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIANG Quan1
	SONG Leibo2

Cite this article:

JIANG Quan1,SONG Leibo2. Application and prospect of 3D printing technology to physical modeling in rock mechanics[J]. , 2018, 37(1): 23-37.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2017.0685 OR https://rockmech.whrsm.ac.cn/EN/Y2018/V37/I1/23

[1] 何满潮，谢和平，彭苏萍，等. 深部开采岩体力学研究[J]. 岩石力学与工程学报，2005，24(16)：2 803–2 813.(HE Manchao，XIE Heping，PENG Suping，et al. Study on rock mechanics in deep mining engineering[J]. Chinese Journal of Rock Mechanics and Engineering， 2005，24(16)：2 803–2 813.(in Chinese))
[2] 谢和平，高峰，鞠杨. 深部岩体力学研究与探索[J]. 岩石力学与工程学报，2015，34(11)：2 161–2 178.(XIE Heping，GAO Feng，JU Yang. Research and development of rock mechanics in deep ground engineering[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(11)：2 161–2 178.(in Chinese))
[3] 冯夏庭，王泳嘉. 深部开采诱发的岩爆及其防治策略的研究进展[J]. 中国矿业，1998，7(5)：42–45.(FENG Xiating，WANG Yongjia. New development in researching rockburst induced by mining at great depth and its control strategies[J]. Journal of China Coal Industry，1998，7(5)：42–45.(in Chinese))
[4] 钱七虎. 非线性岩石力学的新进展——深部岩体力学的若干问题[C]// 中国岩石力学与工程学会编. 第八次全国岩石力学与工程学术大会论文集. 北京：科学出版社，2004：10–17.(QIAN Qihu. The current development of nonlinear rock mechanics：the mechanics problems of deep rock mass[C]// Chinese Society of Rock Mechanics and Engineering ed. Proceedings of the 8th Rock Mechanics and Engineering Conference. Beijing：Science Press，2004：10–17.(in Chinese))
[5] POLLARD D D，AYDIN A. Progress in understanding jointing over the past century[J]. Geological Society of America Bulletin，1988，100(8)：1 181–1 204.
[6] 谷德振，岩体工程地质力学基础[M]. 北京：科学出版社，1979：198–221.(GU Dezhen. Basic mechanics of engineering geology for rock mass[M]. Beijing：Science Press，1979：198–221.(in Chinese))
[7] 夏才初，孙宗颀. 工程岩体节理力学[M]. 上海：同济大学出版社，2002：100–101.(XIA Caichu，SUN Zongqi. Joint mechanics of engineering rock mass[M]. Shanghai：Tongji University Press，2002：100–101.(in Chinese))
[8] HERGET G，UNRUG K. In situ，rock strength from triaxial testing[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1976，13(11)：299–302.
[9] JIANG Q，FENG X T，CHEN J，et al. Estimating in-situ rock stress from spalling veins：a case study[J]. Engineering Geology，2013，152(1)：38–47.
[10] NIZAMETDINOV F K，NAGIBIN A A，LEVASHOV V V，et al. Methods of in situ strength testing of rocks and joints[J]. Journal of Mining Science，2016，52(2)：226–232.
[11] 贾志欣，汪小刚，赵宇飞，等. 岩石钻孔原位测试技术的应用与改进[J]. 岩石力学与工程学报，2013，32(6)：1 264–1 269.(JIA Zhixin，WANG Xiaogang，ZHAO Yufei，et al. Application and improvement of rock borehole in-situ testing technology[J]. Chinese Journal of Rock Mechanics and Engineering，2013，32(6)：1 264–1 269.(in Chinese))
[12] 冯夏庭，吴世勇，李邵军，等. 中国锦屏地下实验室二期工程安全原位综合监测与分析[J]. 岩石力学与工程学报，2016，35(4)：649–657.(FENG Xiating，WU Shiyong，LI Shaojun，et al. Comprehensive field monitoring of deep tunnels at Jinping underground laboratory (CJPL –II) in China[J]. Chinese Journal of Rock Mechanics and Engineering，2016，35(4)：649–657.(in Chinese))
[13] GOODMAN R E，TAYLOR R L，BREKKE T L. A model for the mechanics of jointed rock[J]. Journal of Soil Mechanics and Foundations Division，1968，94：637–660.
[14] BARTON N，BANDIS S，BAKHTAR K. Strength， deformation and conductivity coupling of rock joints[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1985，22(3)：121–140.
[15] 朱维申，王平. 节理岩体的等效连续模型与工程应用[J]. 岩土工程学报，1992，14(2)：1–11.(ZHU Weishen，WANG Ping. An equivalent continuum model for jointed rocks and its engineering application[J]. Chinese Journal of Geotechnical Engineering，1992，14(2)：1–11.(in Chinese))
[16] HART R. Enhancing rock stress understanding through numerical analysis[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(7/8)：1 089–1 097.
[17] BARTON N R. A model study of rock-joint deformation[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1972，9(5)：579–582.
[18] 林韵梅. 实验岩石力学——模拟研究[M]. 北京：煤炭工业出版社，1984：1–2.(LIN Yunmei. Simulation research on rock mechanics experiment[M]. Beijing：China Coal Industry Publishing House，1984：1–2. (in Chinese))
[19] 陈春利，殷跃平，门玉明，等. 全长黏结注浆格构锚固工程模型试验研究[J]. 岩石力学与工程学报，2017，36(4)：881–889.(CHEN Chunli，YIN Yueping，MEN Yuming，et al. Model test on fully grouted lattice beam anchorage[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(4)：881–889.(in Chinese))
[20] VOGLER U W， KOVARI K. Suggested methods for determining the strength of rock materials in triaxial compression[J]. International Journal of Rock Mechanics And Mining Sciences，1978，15(2)：47–51.
[21] 杜时贵，黄曼，罗战友，等. 岩石结构面力学原型试验相似材料研究[J]. 岩石力学与工程学报，2010，29(11)：2 263–2 270.(DU Shigui，HUANG Man，LUO Zhanyou，et al. Similar material study of mechanical prototype test of rock structural plane[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(11)：2 263–2 270.(in Chinese))
[22] GARBOCZI E J，CHEOK G S，STONE W C. Using LADAR to characterize the 3D shape of aggregates：Preliminary results[J]. Cement and Concrete Research，2006，36(6)：1 072–1 075.
[23] HÄFNER S，ECKARDT S，LUTHER T，et al. Mesoscale modeling of concrete：Geometry and numerics[J]. Computers and Structures，2006，84(7)：450–461.
[24] 尚岳全，孙红月. 岩土力学数值模拟结果应用中应注意的问题[J]. 地质灾害与环境保护，1997，(4)：22–26.(SHANG Yuequan，SUN Hongyue. The application problems of numerical simulation results rock mass mechanics[J]. Journal of Geological Hazards and Environment Preservation，1997，(4)：22–26.(in Chinese))
[25] WANG Z M，KWAN A K H，CHAN H C. Mesoscopic study of concrete I：generation of random aggregate structure and finite element mesh[J]. Computers and Structures，1999，70(5)：533–544.
[26] CUI H Z，LO T Y，MEMON S A，et al. Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete[J]. Construction and Building Materials，2012，35(10)：149–158.
[27] KIM H，BUTTLAR W G. Discrete fracture modeling of asphalt concrete[J]. International Journal of Solids and Structures，2009，46(13)：2 593–2 604.
[28] WU K R，CHEN B，YAO W，et al. Effect of coarse aggregate type on mechanical properties of high-performance concrete[J]. Cement and Concrete Research，2001，31(10)：1 421–1 425.
[29] JU Y，XIE H，ZHENG Z，et al. Visualization of the complex structure and stress field inside rock by means of 3D printing technology[J]. Science Bulletin，2014，59(36)：5 354–5 365.
[30] JU Y，WANG L，XIE H，et al. Visualization and transparentization of the structure and stress field of aggregated geomaterials through 3d printing and photoelastic techniques[J]. Rock Mechanics and Rock Engineering，2017，50(6)：1 383–1 407.
[31] LIU P，JU Y， RANJITH P G，et al. Visual representation and characterization of three-dimensional hydrofracturing cracks within heterogeneous rock through 3D printing and transparent models[J]. International Journal of Coal Science and Technology，2016，3(3)：284–294.
[32] ISHUTOV S，HASIUK F J，HARDING C，et al. 3D printing sandstone porosity models[J]. Interpretation，2015，3(3)：SX49–SX61.
[33] JIANG C，ZHAO G F. A Preliminary study of 3D printing on rock mechanics[J]. Rock Mechanics and Rock Engineering，2015，48(3)：1 041–1 050.
[34] JIANG C，ZHAO G F，ZHU J，et al. Investigation of dynamic crack coalescence using a gypsum-like 3d printing material[J]. Rock Mechanics and Rock Engineering，2016，49(10)：1–16.
[35] JIANG Q，FENG X，GONG Y，et al. Reverse modelling of natural rock joints using 3D scanning and 3D printing[J]. Computers and Geotechnics，2016，73(3)：210–220.
[36] JIANG Q，FENG X，SONG L，et al. Modeling rock specimens through 3D printing：tentative experiments and prospects[J]. Acta Mechanica Sinica，2016，32(1)：101–111.
[37] HEAD D，VANORIO T. Effects of changes in rock microstructures on permeability：3D printing investigation[J]. Geophysical Research Letters，2016，43(14)：7 494–7 502.
[38] OFweek 3D打印网. 超级大百科：全球最流行的七大3D打印技术详解[EB/OL]. http：//3dprint.ofweek.com/2016–09/ART–132109–8500-30040401.html， 2016–09–20.(OFweek 3D Printing Network. Super Encyclopedia：the world?s most popular seven 3D printing techniques[EB/OL]. http：// 3dprint.ofweek.com/2016–09/ART–132109–8500-30040401.html，2016–09–20. (in Chinese))
[39] COOK N G W. The failure of rock[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1965，2(4)：389–403.
[40] 王明洋，严东晋，周早生，等. 岩石单轴试验全程应力应变曲线讨论[J]. 岩石力学与工程学报，1998，17(1)：101–106.(WANG Mingyang，YAN Dongjin，ZHOU Zaosheng，et al. Discussion on complete stress-strain curves of rocks under uniaxial loading[J]. Chinese Journal of Rock Mechanics and Engineering，1998，17(1)：101–106.(in Chinese))
[41] FAIRHURST C E，HUDSON J A. Draft ISRM suggested method for the complete stress-strain curve for intact rock in uniaxial compression[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1999，36(3)：281–289.
[42] JIANG Q，FENG X T，HATZOR Y H，et al. Mechanical anisotropy of columnar jointed basalts：an example from the Baihetan hydropower station，China[J]. Engineering Geology，2014，175(3)：35–45.
[43] 尤明庆，华安增. 岩石试样单轴压缩的破坏形式与承载能力的降低[J]. 岩石力学与工程学报，1998，17(3)：292–296.(YOU Mingqing，HUA Anzeng. Fracture of rock specimen and decrement of bearing capacity in uniaxial compression[J]. Chinese Journal of Rock Mechanics and Engineering，1998，17(3)：292–296.(in Chinese))
[44] TANG C A，LIN P，WONG R，et al. Analysis of crack coalescence in rock-like materials containing three flaws—Part II：numerical approach[J]. International Journal of Rock Mechanics and Mining Sciences，2001，38(7)：925–939.
[45] 刘晓丽，王思敬，王恩志，等. 单轴压缩岩石中缺陷的演化规律及岩石强度[J]. 岩石力学与工程学报，2008，27(6)：1 195–1 201.(LIU Xiaoli，WANG Sijing，WANG Enzhi，et al. Evolutionary rules of flaws in rock subjected to uniaxial compression and rock strength[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(6)：       1 195–1 201.(in Chinese))
[46] 胡盛斌，邓建，马春德，等. 循环荷载作用下含缺陷岩石破坏特征试验研究[J]. 岩石力学与工程学报，2009，28(12)：2 490–2 495. (HU Shengbin，DENG Jian，MA Chunde，et al. Experimental study of failure characteristics of rock containing flaw under cyclic loading[J]. Chinese Journal of Rock Mechanics and Engineering，2009，28(12)：2 490–2 495.(in Chinese))
[47] WONG R H C，LIN P，TANG C A. Experimental and numerical study on splitting failure of brittle solids containing single pore under uniaxial compression[J]. Mechanics of Materials，2006，38(1/2)：142–159.
[48] 杨圣奇，吕朝辉，渠涛. 含单个孔洞大理岩裂纹扩展细观试验和模拟[J]. 中国矿业大学学报，2009，38(6)：774–781.(YANG Shengqi，LU Zhaohui，QU Tao. Investigations of crack expansion in marble having a single pre-existing hole：experiment and simulations[J]. Journal of China University of Mining and Technology，2009，38(6)：774–781.(in Chinese))
[49] 杜明瑞，靖洪文，苏海健，等. 孔洞形状对砂岩强度及破坏特征的影响[J]. 工程力学，2016，33(7)：190–196.(DU Mingrui，JING Hongwen，SU Haijiang，et al. Effects of holes? geometrical shape on strength and failure characteristics of a sandstone sample containing a single hole[J]. Engineering Mechanics，2016，33(7)：190–196.(in Chinese))
[50] WONG L N Y，EINSTEIN H H. Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(2)：239–249.
[51] YANG S，JING H，XU T. Mechanical behavior and failure analysis of brittle sandstone specimens containing combined flaws under uniaxial compression[J]. Journal of Central South University，2014，21(5)：        2 059–2 073.
[52] 黄凯珠，林鹏，唐春安，等. 双轴加载下断续预制裂纹贯通机制的研究[J]. 岩石力学与工程学报，2002，21(6)：808–816.(WONG ROBINA H C，LIN Peng，TANG Chun?an，et al. Mechanisms of crack coalescence of pre-existing flaws under biaxial compression[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(6)：808–816.(in Chinese))
[53] GROTE D L，PARK S W，ZHOU M. Dynamic behavior of concrete at high strain rates and pressures：I. experimental characterization[J]. International Journal of Impact Engineering，2001，25(9)：869–886.
[54] DYSKIN A V，SAHOURYEH E，JEWELL R J，et al. Influence of shape and locations of initial 3D cracks on their growth in uniaxial compression[J]. Engineering Fracture Mechanics，2003，70(15)：2 115–2 136.
[55] WONG R H C，CHAU K T. Crack coalescence in a rock-like material containing two cracks[J]. International Journal of Rock Mechanics and Mining Sciences，1998，35(2)：147–164.
[56] HUANG F，ZHU H，XU Q，et al. The effect of weak interlayer on the failure pattern of rock mass around tunnel–Scaled model tests and numerical analysis[J]. Tunnelling and Underground Space Technology，2013，35(4)：207–218.
[57] 朱维申，李勇，张磊，等. 高地应力条件下洞群稳定性的地质力学模型试验研究[J]. 岩石力学与工程学报，2008，27(7)：1 308–         1 314.(ZHU Weishen，LI Yong，ZHANG Lei，et al. Geomechanical model test on stability of cavern group under high geostress[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(7)：        1 308–1 314.(in Chinese))
[58] 刘泉声，雷广峰，肖龙鸽，等. 十字岩柱法隧道开挖地质力学模型试验研究[J]. 岩石力学与工程学报，2016，35(5)：919–927.(LIU Quansheng，LEI Guangfeng，XIAO Longge，et al. Geomechanical model test on the tunnel excavation with cross rock pillar method[J] Chinese Journal of Rock Mechanics and Engineering，2016，35(5)：919–927.(in Chinese))
[59] 徐前卫，程盼盼，朱合华，等. 跨断层隧道围岩渐进性破坏模型试验及数值模拟[J]. 岩石力学与工程学报，2016，35(3)：433–445.(XU Qianwei，CHENG Panpan，ZHU Hehua，et al. Experimental study and numerical simulation on progressive failure characteristics of the fault-crossing tunnel surrounding rock[J]. Chinese Journal of Rock Mechanics and Engineering，2016，35(3)：433–445.(in Chinese))
[60] ATAPOUR H，MOOSAVI M. Some effects of shearing velocity on the shear stress deformation behaviour of hard-soft artificial material interfaces[J]. Geotechnical and Geological Engineering，2013，31(5)：1 603–1 615.
[61] JOHNSTON I W，LAM T S K. Shear behavior of regular triangular concrete/rock joints-analysis[J]. Journal of Geotechnical Engineering，1989，115(5)：711–727.
[62] TSE R. Cruden D M. Estimating joint roughness coefficients[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1979，16(5)：303–307.
[63] ASTM. Standard practice for making and curing concrete test specimens in the laboratory(ASTM Standard C192)[S]. West Conshohocken：ASTM International，2012.
[64] 沈明荣，张清照. 规则齿形结构面剪切特性的模型试验研究[J]. 岩石力学与工程学报，2010，29(4)：713–719.(SHEN Mingrong，ZHANG Qingzhao. Experimental study of shear deformation characteristics of rock mass discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(4)：713–719.(in Chinese))
[65] 朱小明，李海波，李博，等. 含一阶和二阶起伏体节理剪切强度的试验研究[J]. 岩石力学与工程学报，2011，30(9)：1 810–1 818. (ZHU Xiaoming，LI Haibo，LIU Bo，et al. Experimental study of shear strength of joints with first-order and second-order asperities[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(9)：       1 810–1 818.(in Chinese))
[66] 3D Systems Inc.. ProJet® x60 Series：Professional 3D Printers [EB/OL]. https：//www.3dsystems.com/sites/default/files/projet-x60- series-us_0.pdf，2013–4.