[1] |
BARTON N,BANDIS S. Review of pridictive capbilities of JRC-JCS model in the engineering practice[C]// Proceedings of the International Symposium on Rock Joints. Publ,Rotterdam:A A Balkema,1990:603-610.
|
[2] |
黄 曼,杜时贵,罗战友,等. 基于多尺度直剪试验的岩石模型结构面抗剪强度特征研究[J]. 岩土力学,2013,34(11):3 180-3 186. (HUANG Man,DU Shigui,LUO Zhanyou,et al. Study of shear strength characteristic of simulation rock structural planes based on multi-size direct shear tests[J]. Rock and Soil Mechanics,2013,34(11):3 180-3 186.(in Chinese))
|
[3] |
BAHAADDINI M,HAGAN P,MITRA R,et al. Scale effect on the shear behaviour of rock joints based on a numerical study[J]. Engineering Geology,2014,181:212-223.
|
[4] |
乐慧琳,吴继敏,高晓兵,等. 尺寸效应对锯齿状结构面抗剪强度影响[J]. 辽宁工程技术大学学报:自然科学版,2016,(7):745-750.(LE Huilin,WU Jimin,GAO Xiaobing,et al. Influence of size effect on shearing strength of zig-zag structure plane[J]. Journal of Liaoning Technical University:Natural Science,2016,(7):745-750.(in Chinese))
|
[5] |
BARTON N,BANDIS S. Strength deformation and conductivity coupling of rock joints[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts,1985,22(3):121-140.
|
[6] |
王金安,谢和平,田晓燕,等. 岩石断裂表面分形测量的尺度效应[J]. 岩石力学与工程学报,2000,19(1):11-17.(WANG Jinan,XIE Heping,TIAN Xiaoyan,et al. Scale effect on fractal measurement of rock fracture surfaces[J]. Chinese Journal of Rock Mechanics and Engineering,2000,19(1):11-17.(in Chinese))
|
[7] |
夏才初,孙宗颀. 工程岩体节理力学[M]. 上海:同济大学出版社,2002:108-109.(XIA Caichu,SUN Congqi. Engineering rock mass joint mechanics[M]. Shanghai:Tongji University Press,2002:108-109.(in Chinese))
|
[8] |
FENG Q,FARDIN N,JING L,et al. A new method for in situ non-contact roughness measurement of large rock fracture surfaces[J]. Rock Mechanics and Rock Engineering,2003,36(1):3-25.
|
[9] |
FARDIN N. Influence of structural non-stationarity of surface roughness on morphological characterization and mechanical deformation of rock joints[J]. Rock Mechanics and Rock Engineering,2008,41(2):267-297.
|
[10] |
葛云峰,唐辉明,王亮清,等. 天然岩体结构面粗糙度各向异性,尺寸效应,间距效应研究[J]. 岩土工程学报,2016,38(1):170-179.(GE Yunfeng,TANG Huiming,WANG Liangqing,et al. Anisotropy,scale and interval effects of natural rock discontinuity surface roughness[J]. Chinese Journal of Geotechnical Engineering,2016,38(1):170-179.(in Chinese))
|
[11] |
TATONE B,GRASSELLI G. A new 2D discontinuity roughness parameter and its correlation with JRC[J]. International Journal of Rock Mechanics and Mining Sciences,2010,47(8):1 391-1 400.
|
[12] |
TATONE B,GRASSELLI G. An investigation of discontinuity roughness scale dependency using high-resolution surface measurements[J]. Rock Mechanics and Rock Engineering,2013,46(4):657-681.
|
[13] |
吴月秀,刘泉声,刘小燕. 岩体节理粗糙度系数与统计参数的相关关系研究[J]. 岩石力学与工程学报,2011,30(增1):2 593-2 598. (WU Yuexiu,LIU Quanshen,LIU Xiaoyan. Study of relationship between joint roughness coefficient and statistical parameter[J]. Chinese Journal of Rock Mechanics and Engineering,2011,30(Supp.1):2 593-2 598.(in Chinese))
|
[14] |
孙辅庭,佘成学,万利台. Barton标准剖面JRC与独立于采样间距的统计参数关系研究[J]. 岩石力学与工程学报,2014,33(增2):3 539-3 544.(SUN Futing,SHE Chengxue,WAN Litai. Research on relationship between JRC of Barton?s standard profiles and statistics parameters independent of sampling interval[J]. Chinese Journal of Rock Mechanics and Engineering,2014,33(Supp.2):3 539-3 544.(in Chinese))
|
[15] |
宋磊博,江 权,李元辉,等. 不同采样间隔下结构面形貌特征和各向异性特征的统计参数稳定性研究[J]. 岩土力学,2017,38(4):1 121-1 132.(SONG Leibo,JIANG Quan,LI Yuanhui,et al. Stability of statistical parameters of discontinuities morphology and anisotropy based on different sampling intervals[J]. Rock and Soil Mechanics,2017,38(4):1 121-1 132.(in Chinese))
|
[16] |
YONG R,QIN J B,HUANG M,et al. An innovative sampling method for determining the scale effect of rock joints[J]. Rock Mechanics and Rock Engineering,2018,51(11):1-12.
|
[17] |
黄 曼,罗战友,杜时贵. 岩石模型结构面的取样代表性试验研究[J]. 岩石力学与工程学报,2013,32(10):2 008-2 014. (HUANG Man,LUO Zhanyou,DU Shigui. Experimental study of sampling representativeness of structural plane of rock model[J]. Chinese Journal of Rock Mechanics and Engineering,2013,32(10):2 008-2 014.(in Chinese))
|
[18] |
GRASSELLI G,WIRTH J,EGGER P. Quantitative three-dimensional description of a rough surface and parameter evolution with shearing[J]. International Journal of Rock Mechanics and Mining Science,2002,39(6):789-800.
|
[19] |
GRASSELLI G. Shear strength of rock joints based on quantified surface description[J]. Rock Mechanics and Rock Engineering,2006,39(4):295-314.
|