基于监测数据的分段崩落采矿法地表危险变形区边界确定方法研究

doi:10.13722/j.cnki.jrme.2019.0966

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (925 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The sublevel caving mining often results in damage to buildings and structures，and makes them unfit for human habitation or use. Previous studies indicated that the horizontal tensile strain is the most important parameter used to assess the building damage. In this paper，a methodology based on the scattered monitoring horizontal displacement data is provided for calculating the major principal horizontal ground strain and determining the ground acceptable deformation limit. Firstly，interpolation accuracy analysis of three-dimensional scattered data is carried out to select suitable interpolation method，coordinates system of the horizontal displacement vector and the corresponding interpolation parameter and further to obtain the discrete horizontal displacement field. Subsequently，the major principal strain at any point in the continuous deformation zone is calculated approximately based on the centered difference scheme of the geometric equation in continuum mechanics theory. Finally，the ground acceptable deformation limit can be determined according to the acceptable deformation value of buildings in China. A case study in the western area of the Chengchao iron mine is presented here to illustrate the methodology. The results show that the interpolation accuracy in the continuous deformation zone by using ordinary Kriging and Radial Basis Function can be improved by representing the horizontal displacement vector μi in polar coordinates. The calculated horizontal strain at the acceptable deformation limit confirms to the law of the deformation around the mined-out areas，which verifies the reliability of the above numerical methodology. It is also revealed that the acceptable deformation angles of different representative sections at the same mining level are significantly discrepant and that the acceptable deformation angle in Chengchao iron mine should be respectively designed in four zones.

Key words： mining engineering')" href="#">

mining engineering sublevel caving method acceptable deformation limit acceptable deformation angle scattered data interpolation ')" href="#">major principal strain

	Service

	E-mail this article mining engineering;sublevel caving method;acceptable deformation limit;acceptable deformation angle;scattered data interpolation;major principal strain ”. Please open it by linking:https://rockmech.whrsm.ac.cn/EN/abstract/abstract31137.shtml" name="neirong">
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	PANG Hansong1
	2
	CHEN Congxin1
	XIA Kaizong1
	ZHANG Chuqiang3

Cite this article:

PANG Hansong1,2,CHEN Congxin1, et al.

Study on the methodology for determining the ground acceptable deformation limit in sublevel caving mining based on monitoring data

[J]. , 2020, 39(4): 736-748.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2019.0966 OR https://rockmech.whrsm.ac.cn/EN/Y2020/V39/I4/736

[1] BRADY B H G，BROWN E T. Rock mechanics for underground mining[M]. 3rd ed. Berlin：Springer，2006：33–34.
[2] LUPO J F. Evaluation of deformations resulting from mass mining of an inclined orebody[Ph. D. Thesis][D]. Denver：Colorado School of Mines，1996.
[3] VILLEGAS T，NORDLUND E，DAHNÉR-LINDQVIST C. Hangingwall surface subsidence at the Kiirunavaara mine，Sweden[J]. Engineering Geology，2011，121(1/2)：18–27.
[4] 《岩土工程手册》编写委员会. 岩土工程手册[S]. 北京：中国建筑工业出版社，1994.(The Editorial Board of Geotechnical Engineering Handbook. Geotechnical engineering handbook[S]. Beijing：China Architecture and Building Press，1994.(in Chinese))
[5] 夏开宗，刘秀敏，陈从新，等. 程潮铁矿西区地下开采引起的地表变形规律初探[J]. 岩石力学与工程学报，2014，33(8)：1 572–1 588. (XIA Kaizong，LIU Xiumin，CHEN Congxin，et al. Surface deformation in west area of Chengchao iron mine induced by underground mining[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(8)：1 572–1 588.(in Chinese))
[6] National Coal Board(NCB). Subsidence engineers’ handbook[S]. London：Production Department，1966.
[7] 崔希民，张兵，彭超. 建筑物采动损害评价研究现状与进展[J]. 煤炭学报，2015，40(8)：1 718–1 728.(CUI Ximin，ZHANG Bing，PENG Chao. Current status and progress on the estimation of mining-induced building damage[J]. Journal of China Coal Society，2015，40(8)：1 718–1 728.(in Chinese))
[8] SAEIDI A，DECK O，VERDEL T. Development of a damage simulator for the probabilistic assessment of building vulnerability in subsidence areas[J]. International Journal of Rock Mechanics and Mining Sciences，2015，73：42–53.
[9] 《采矿手册》编辑委员会. 采矿手册[S]. 北京：冶金工业出版社，2010.(The Editorial Board of Mining Handbook. Mining handbook[S]. Beijing：Metallurgical Industry Press，2010.(in Chinese))
[10] DARLING P. SME mining engineering handbook[M]. 3rd ed. Colorado：Society for Mining，Metallurgy，and Exploration，Inc. (SME)，2011：627–629.
[11] SHEOREY P R，LOUI J P，SINGH K B，et al. Ground subsidence observations and a modified influence function method for complete subsidence prediction[J]. International Journal of Rock Mechanics and Mining Sciences，2000，37(5)：801–818.
[12] 乔世范. 随机介质变形破坏判据研究及其工程应用[博士学位论文][D]. 长沙：中南大学，2006.(QIAO Shifan. Study on the deformation failure criterion of stochastic medium and its applications[Ph. D. Thesis][D]. Changsha：Central South University，2006.(in Chinese))
[13] SVARTSJAEM M. A prognosis methodology for underground infrastructure damage in sublevel cave mining[J]. Rock Mechanics and Rock Engineering，2019，52(1)：247–263.
[14] HAMDI P，STEAD D，ELMO D，et al. Use of an integrated finite/discrete element method-discrete fracture network approach to characterize surface subsidence associated with sub-level caving[J]. International Journal of Rock Mechanics and Mining Sciences，2018，103：55–67.
[15] MANCINI F，STECCHI F，GABBIANELLI G. GIS-based assessment of risk due to salt mining activities at Tuzla (Bosnia and Herzegovina)[J]. Engineering Geology，2009，109(3/4)：170–182.
[16] ZHAO H J，MA F S，ZHANG Y M，et al. Monitoring and mechanisms of ground deformation and ground fissures induced by cut-and-fill mining in the Jinchuan Mine 2，China[J]. Environmental Earth Sciences，2013，68：1 903–1 911.
[17] 付华，陈从新，夏开宗，等. 金属矿山地下开采引起岩体变形规律浅析[J]. 岩石力学与工程学报，2015，34(9)：1 859–1 868.(FU Hua，CHEN Congxin，XIA Kaizong，et al. Analysis briefly about the law of rock deformation caused by underground mining of metal mines[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(9)：1 859–1 868.(in Chinese))
[18] XIN H，MA F S，ZHAO H J，et al. Monitoring and statistical analysis of mine subsidence at three metal mines in China[J]. Bulletin of Engineering Geology and the Environment，2019，78(6)：3 983–4 001.
[19] STECCHI F，ANTONELLINI M，GABBIANELLI G. Curvature analysis as a tool for subsidence-related risk zones identification in the city of Tuzla (BiH)[J]. Geomorphology，2009，107(3/4)：316–325.
[20] BLACHOWSKI J，CHRZANOWSKI A，ZOSTAK-CHRZANOWSKI A. Application of GIS methods in assessing effects of mining activity on surface infrastructure[J]. Archives of Mining Sciences，2014，59(2)：307–321.
[21] HASTAO?LU K ?，GÜL Y，POYRAZ F，et al. Monitoring 3D areal displacements by a new methodology and software using UAV photogrammetry[J]. International Journal of Applied Earth Observation and Geoinformation，2019，83：101916.
[22] 朱建军，杨泽发，李志伟. InSAR矿区地表三维形变监测与预计研究进展[J]. 测绘学报，2019，48(2)：135–144.(ZHU Jianjun，YANG Zefa，LI Zhiwei. Recent progress in retrieving and predicting mining-induced 3D displacements using InSAR[J]. Acta Geodaetica et Cartographica Sinica，2019，48(2)：135–144.(in Chinese))
[23] MALINOWSKA A，HEJMANOWSKI R. Building damage risk assessment on mining terrains in Poland with GIS application[J]. International Journal of Rock Mechanics and Mining Sciences，2010，47(2)：238–245.
[24] PRESS W H，TEUKOLSKY S A，VETTERLING W T，et al. Numerical recipes[M]. 3rd ed. New York：Cambridge University Press，2007：139–147.
[25] OLEA R A. Geostatistics for engineers and earth scientists[M]. New York：Springer-Science+Business Media，LLC.，1999：39–79.
[26] WEBSTER R，OLIVER M A. Geostatistics for environmental scientists[M]. 2nd ed. West Sussex：John Wiley & Sons，Ltd.，2007：172–173.
[27] LI J，CASSIDY M J，HUANG J，et al. Probabilistic identification of soil stratification[J]. Géotechnique，2015，66(1)：16–26.
[28] CARLSON R E，FOLEY T A. The parameter R2 in multiquadric interpolation[J]. Computers and Mathematics with Applications，1991，21(9)：29–42.
[29] 黄平路. 构造应力型矿山地下开采引起岩层移动规律的研究[博士学位论文][D]. 武汉：中国科学院武汉岩土力学研究所，2008. (HUANG Pinglu. Study on rock movement caused by underground mining in tectonic stress mines[Ph. D. Thesis][D]. Wuhan：Institute of Rock and Soil Mechanics，Chinese Academy of Sciences，2008.(in Chinese))
[30] 宋许根，陈从新，夏开宗，等. 程潮铁矿塌陷区周边地表变形扩展规律研究[J]. 岩石力学与工程学报，2018，37(2)：415–429.(SONG Xugen，CHEN Congxin，XIA Kaizong，et al. Study on ground deformation around collapse zone in Chengchao iron mine[J]. Chinese Journal of Rock Mechanics and Engineering，2018，37(2)：415–429.(in Chinese))
[31] 邓洋洋. 崩落法开采引起的金属矿山岩体变形和移动机理研究[博士学位论文][D]. 武汉：中国科学院武汉岩土力学研究所，2019. (DENG Yangyang. Study on deformation and movement mechanism of rock mass in a metal mine caused by non-pillar sublevel caving mining[Ph. D. Thesis][D]. Wuhan：Institute of Rock and Soil Mechanics，Chinese Academy of Sciences，2019.(in Chinese))
[32] KRATZSCH H. Mining subsidence engineering[M]. Berlin：Springer- Verlag，1983：167–169.
[33] XIA K Z，CHEN C X，FU H，et al. Mining-induced ground deformation in tectonic stress metal mines：a case study[J]. Engineering Geology，2016，210：212–230.
[34] 夏开宗，陈从新，夏天游，等. 结构面对程潮铁矿西区地表变形的影响分析[J]. 岩土力学，2015，36(5)：1 389–1 396.(XIA Kaizong，CHEN Congxin，XIA Tianyou，et al. Analysis of influence of structural planes on surface deformation in western area of Chengchao Iron Mine[J]. Rock and Soil Mechanics，2015，36(5)：1 389–1 396. (in Chinese))
[35] GHABRAIE B，REN G，BARBATO J，et al. A predictive methodology for multi-seam mining induced subsidence[J]. International Journal of Rock Mechanics and Mining Sciences，2017，93：280–294.