适用于黏土和砂土的亚塑性剑桥模型

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (999 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Considering the similarity of the mechanical behaviors of clay and sand soils，such as the strain softening and dilatancy features exhibited during the drained triaxial test，and the alternating mobility feature induced by cyclic loading under the undrained condition，a new hypoplastic Cam-clay model is established by combining the hypoplastic theory and the critical state soil mechanics. The model first adopts a linear ultimate compression curve to calculate the Hvorslev equivalent stress of sand to determine the asymptotic state boundary surface uniquely. On the other hand，the ultimate compression curve will coincide with the isotropic consolidation compression curve of clay. Second，a new density factor is defined based on the relative positional relationship between the current state point of the soil and the critical state line，which affects the evolution of the normalized stress path of the soil inside the asymptotic state boundary surface. The initial value of the density factor depends on the overconsolidation ratio of the clay or the initial void ratio of the sand，which can be used as a state parameter to describe the effects of factors including stress history，relative density，and loading path on soil behaviors. The proposed model has parameters similar to those of the Cam-clay model，which can be calibrated through conventional laboratory tests. The calculation results indicate that the proposed model can reasonably describe the complex behaviors of clay and sand under drained and undrained shearing conditions，which can also capture the alternating mobility feature during cyclic loading. The validity of the proposed model is further verified by comparing the model predictions with the triaxial test results of Kaolin clay，Karlsruhe fine sand，and Toyoura sand.

Key words： soil mechanics clay sand hypoplastic theory critical state constitutive model

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Haichao1
	LI Tao1
	TONG Chenxi2
	HE Zuoyue3
	ZHANG Sheng2

Cite this article:

LI Haichao1,LI Tao1,TONG Chenxi2, et al. Hypoplastic cam-clay model for clay and sand soils[J]. , 2024, 43(12): 3096-3107.

URL:

https://rockmech.whrsm.ac.cn/EN/Y2024/V43/I12/3096

[1]	LI X，LU D，DONG X，et al. A simple 3D elastoplastic constitutive model for overconsolidated soils based on the improved Hvorslev envelope[J]. Computers and Geotechnics，2023，162：105657.
[2]	XIAO P，LIU H，STUEDLEIN A W，et al. Effect of relative density and biocementation on cyclic response of calcareous sand[J]. Canadian Geotechnical Journal，2019，56(12)：1 849–1 862.
[3]	PESTANA J M，WHITTLE A J，SALVATI L A. Evaluation of a constitutive model for clays and sands：Part I–sand behaviour[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2002，26(11)：1 097–1 121.
[4]	PESTANA J M，WHITTLE A J，GENS A. Evaluation of a constitutive model for clays and sands：Part II–clay behaviour[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2002，26(11)：1 123–1 146.
[5]	JAVANMARDI Y，IMAM S M R，PASTOR M，et al. A reference state curve to define the state of soils over a wide range of pressures and densities[J]. Géotechnique，2018，68(2)：95–106.
[6]	YAO Y P，LIU L，LUO T，et al. Unified hardening(UH) model for clays and sands[J]. Computers and Geotechnics，2019，110：326–343.
[7]	姚仰平，陈凯. 砂土的密度相关状态参量的划分及分析[J]. 土木工程学报，2023，56(9)：116–124.(YAO Yangping，CHEN Kai. Classification and analysis of density-dependent state parameters for sand[J]. China Civil Engineering Journal，2023，56(9)：116–124.(in Chinese))
[8]	姚仰平，朱丙龙，刘林. 不同类土的基本力学特性差异性描述[J]. 岩土工程学报，2022，45(1)：33–46.(YAO Yangping，ZHU Binglong，LIU lin. Differential description of basic mechanical properties of different soils[J]. Chinese Journal of Geotechnical Engineering，2022，45(1)：33–46.(in Chinese))
[9]	YU H S. CASM：A unified state parameter model for clay and sand[J]. International Journal for Numerical and Analytical Methods in Geomechanics，1998，22(8)：621–653.
[10]	YU H S，KHONG C，WANG J. A unified plasticity model for cyclic behaviour of clay and sand[J]. Mechanics Research Communications，2007，34(2)：97–114.
[11]	BEEN K，JEFFERIES M G. A state parameter for sands[J]. Géotechnique，1985，35(2)：99–112.
[12]	李海潮，童晨曦，马博，等. 基于双参数屈服函数的黏土和砂土非正交单屈服面模型[J]. 岩石力学与工程学报，2020，39(11)：2 319–2 327.(LI Haichao，TONG Chenxi，MABo，et al，et al. A non-orthogonal single yield surface model for clays and sands based on a two-parameter yield function[J]. Chinese Journal of Rock Mechanics and Engineering，2020，39(11)：2 319–2 327.(in Chinese))
[13]	NIEMUNIS A，HERLE I. Hypoplastic model for cohesionless soils with elastic strain range[J]. Mechanics of Cohesive-frictional Materials，1997，2(4)：279–299.
[14]	BAUER E. Calibration of a comprehensive hypoplastic model for granular materials[J]. Soils and Foundations，1996，36(1)：13–26.
[15]	HERLE I，GUDEHUS G. Determination of parameters of a hypoplastic constitutive model from properties of grain assemblies[J]. Mechanics of Cohesive-frictional Materials，1999，4(5)：461–486.
[16]	NIEMUNIS A，HERLE I. Hypoplastic model for cohesionless soils with elastic strain range[J]. Mechanics of Cohesive‐frictional Materials，1997，2(4)：279–299.
[17]	HERLE I, KOLYMBAS D. Hypoplasticity for soils with low friction angles[J]. Computers and Geotechnics，2004，31(5)：365–373.
[18]	WU W，BAUER E. A simple hypoplastic constitutive model for sand[J]. International Journal for Numerical and Analytical Methods in Geomechanics，1994，18(12)：833–862.
[19]	WU W，LIN J，WANG X. A basic hypoplastic constitutive model for sand[J]. Acta Geotechnica，2017，12(6)：1 373–1 382.
[20]	HUANG W X，WU W，SUN D A，et al. A simple hypoplastic model for normally consolidated clay[J]. Acta Geotechnica，2006，1(1)：15–27.
[21]	QIAN H，WU W，XU C，et al. A hypoplastic model for hydrate‐bearing sand considering hydrate saturation and grain breakage[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2023，47(16)：3 044–3 064.
[22]	WEIFNER T，KOLYMBAS D. A hypoplastic model for clay and sand[J]. Acta Geotechnica，2007，2(2)：103–112.
[23]	张嘎，张建民，吴伟. 考虑物态变化的粗粒土亚塑性本构模型[J]. 岩土力学，2008，29(6)：1 530–1 534.(ZHANG Ga，ZHANG Jianmin，WU Wei. A hypoplastic model of gravelly soil considering physical state[J]. Rock and Soil Mechanics，2008，29(6)：1 530–1 534. (in Chinese))
[24]	徐国方. 冻土的力学性质及其亚塑性本构模型研究[博士学位论文][D]. 北京：中国科学院大学，2012.(XU Guofang. Mechanical properties and hypoplastic constitutive model for frozen soils[Ph. D. Thesis][D]. Beijing：University of Chinese Academy of Sciences，2012.(in Chinese))
[25]	DING Y，HUANG W，SHENG D，et al. Numerical study on finite element implementation of hypoplastic models[J]. Computers and Geotechnics，2015：6 878–6 890.
[26]	MA?íN D. A hypoplastic constitutive model for clays[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2005，29(4)：311–336.
[27]	GUDEHUS G. A comprehensive constitutive equation for granular materials[J]. Soils and Foundations，1996，36(1)：1–12.
[28]	MA?íN D. Hypoplastic cam-clay model[J]. Géotechnique，2012，62(6)：549–553.
[29]	JERMAN J，MA?íN D. Hypoplastic and viscohypoplastic models for soft clays with strength anisotropy[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2020，44(10)：1 396–1 416.
[30]	MA?íN D. Comparison of predictive capabilities of selected elasto-plastic and hypoplastic models for structured clays[J]. Soils and Foundations，2009，49(3)：381–390.
[31]	RAGNI R，WANG D，MA?íN D，et al. Numerical modelling of the effects of consolidation on jack-up spudcan penetration[J]. Computers and Geotechnics，2016：7 825–7 837.
[32]	NG C W W，SUN H S，LEI G H，et al. Ability of three different soil constitutive models to predict a tunnel?s response to basement excavation[J]. Canadian Geotechnical Journal，2015，52(11)：1 685–1 698.
[33]	SHENG D C，YAO Y，CARTER J P. A volume-stress model for sands under isotropic and critical stress states[J]. Canadian Geotechnical Journal，2008，45(11)：1 639–1 645.
[34]	WICHTMANNI T，TRIANTAFYLLIDIS T. Monotonic and cyclic tests on kaolin：a database for the development，calibration and verification of constitutive models for cohesive soils with focus to cyclic loading[J]. Acta Geotechnica，2018，13(5)：1 103–1 128.
[35]	WICHTMANN T，TRIANTAFYLLIDIS T. An experimental database for the development，calibration and verification of constitutive models for sand with focus to cyclic loading：part I—tests with monotonic loading and stress cycles[J]. Acta Geotechnica，2016，11(4)：739–761.
[36]	VERDUGO R，ISHIHARA K. The steady state of sandy soils[J]. Soils and Foundations，1996，36(2)：81–91.
[37]	NIEMUNIS A. Extended hypoplastic model for soils[Ph. D. Thesis][D]. Bochum：Ruhr-University，2003.
[38]	BOBEI D C，LO S R，WANATOWSKI D，et al. Modified state parameter for characterizing static liquefaction of sand with fines[J]. Canadian Geotechnical Journal，2009，46(3)：281–295.
[39]	WANG Z L，DAFALIAS Y F，LI X S，et al. State pressure index for modeling sand behavior[J]. Journal of Geotechnical and Geoenvironmental Engineering，2002，128(6)：511–519.
[40]	XIAO Y，LIU H. Elastoplastic constitutive model for rockfill materials considering particle breakage[J]. International Journal of Geomechanics，2017，17(1)：04016041.