基于Williams级数与数字图像相关法的裂纹尖端定位方法

doi:10.3724/1000-6915.jrme.2025.0075

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (3592 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The stress intensity factors (SIFs) are critical parameters for evaluating crack propagation behaviour and rock mass stability. In order to improve the accuracy of SIFs determination based on Williams series and digital image correlation (DIC), this study proposes a regional search method combining displacement residuals and the Williams series term -1 to locate crack tip. Numerical simulations were conducted to systematically analyze the influence of calculation region parameters and the number of expansion terms. The variation of SIFs in mode I fractures were calculated and analyzed for polymethyl methacrylate (PMMA) and granite specimens with prefabricated cracks under three-point bending. The results indicate: (1) This method remedies the deficiency of the -1 term in the Williams series, which is only applicable to straight crack propagation, and resolves the issue of local optimal solutions encountered when using displacement residuals alone. (2) For SIF calculations, the recommended angular range for the sector region is 120°–170°. The inner radius should be 0.2 times the prefabricated crack length. The outer radius should be 1 to 2 times the prefabricated crack length, and the maximum expansion order should increase with expansion of the calculation regions. (3) In mode I rock fracture, tortuous crack propagation can be simplified to as straight crack propagation for analysis without significantly affecting SIF results.

Key words： rock mechanics rock fracture stress intensity factor crack tip digital image correlation (DIC) Williams series

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	FENG Ruirui1
	MAO Lingtao1
	2
	LI Qingxiang1
	YAO Yongzhou1
	SONG Hongli1

Cite this article:

FENG Ruirui1,MAO Lingtao1,2, et al. Crack tip localization method based on Williams series and digital image correlation method[J]. , 2025, 44(7): 1857-1868.

URL:

https://rockmech.whrsm.ac.cn/EN/10.3724/1000-6915.jrme.2025.0075 OR https://rockmech.whrsm.ac.cn/EN/Y2025/V44/I7/1857

[1]	李清，于强，张随喜，等. I型裂纹动态断裂参量的应变片测试方法研究[J]. 岩石力学与工程学报，2018，37(6)：1 430-1 437.(LI Qing，YU Qiang，ZHANG Suixi，et al. Strain gauge method for the measurement of dynamic fracture parameters of mode-I crack[J]. Chinese Journal of Rock Mechanics and Engineering，2018，37(6)：1 430-1 437.(in Chinese))
[2]	PENG L Z，YUE Z W，XU S N，et al. Dynamic fracture mechanism and behaviour of V-notch white marble specimens with strain gauge and digital image correlation in three-point bending tests[J]. International Journal of Impact Engineering，2023，180：104707.
[3]	赵熙，鞠杨，郑泽民. 混合型应力强度因子的光弹性多参数测定[J]. 工程科学学报，2017，39(8)：1 288-1 294.(ZHAO Xi，JU Yang，ZHENG Zemin. Multiple parameter measurement of mixed-mode stress intensity factors using the photoelastic method[J]. Chinese Journal of Engineering，2017，39(8)：1 288-1 294.(in Chinese))
[4]	XU J R，HE W H，WANG Z，et al. An improved photoelastic method for determining stress intensity factors of rock-like material[J]. Theoretical and Applied Fracture Mechanics，2024，133：104608.
[5]	ZHOU H，GUO W，ZHOU Y. Investigation on stress intensity factor and fracture characteristics of SCB sandstone containing prefabricated cracks[J]. Theoretical and Applied Fracture Mechanics，2023，124：103754.
[6]	李伟，郑宏，王海龙，等. 求解断裂问题的新型无网格数值流形法[J]. 岩石力学与工程学报，2020，39(增1)：2 655-2 664.(LI Wei，ZHENG Hong，WANG Hailong，et al. A new meshfree-numerical manifold method for solving the fracture problem[J]. Chinese Journal of Rock Mechanics and Engineering，2020，39(Supp.1)：2 655-2 664.(in Chinese))
[7]	刘瑞峰，朱哲明，杜郁美，等. 爆炸载荷作用下不同长度裂纹的动态扩展规律研究[J]. 岩石力学与工程学报，2022，41(增2)：3 114-3 123.(LIU Ruifeng，ZHU Zheming，DU Yumei，et al. Study on dynamic propagation law of cracks with different lengths under blasting[J]. Chinese Journal of Rock Mechanics and Engineering，2022，41(Supp.2)：3 114-3 123.(in Chinese))
[8]	MCNEILL S R，PETERS W H，SUTTON M A. Estimation of stress intensity factor by digital image correlation[J]. Engineering Fracture Mechanics，1987，28(1)：101-112.
[9]	MIAO S T，PAN P Z，HOU W B，et al. Stress intensity factor evolution considering fracture process zone development of granite under monotonic and stepwise cyclic loading[J]. Engineering Fracture Mechanics，2022，273：108727.
[10]	WANG J S，DENG Y C，ZHANG S T，et al. Investigating the effect of water saturation on rock fracture characteristics：some insights from digital image correlation technology[J]. Energy and Fuels，2024，38(7)：5 690-5 699.
[11]	DABLOUL R，JIN B C，JHA B. Failure analysis of the edge-notched beam test on fluid-exposed Berea Sandstone[J]. Acta Geotechnica，2023，18(8)：4 035-4 053.
[12]	ZHANG N，HEDAYAT A，SOSA H G B，et al. Estimation of the mode I fracture toughness and evaluations on the strain behaviors of the compacted mine tailings from full-field displacement fields via digital image correlation[J]. Theoretical and Applied Fracture Mechanics，2021，114：103114.
[13]	WANG Q Z，SHI F S，WANG X，et al. Dynamic mechanical response，cracking behavior，and stress intensity factors of cement mortar specimens with open and closed flaws[J]. Shock and Vibration，2022，2022：5956525.
[14]	耿传庆，李阳阳，刘函，等. 低温数字图像相关方法中的制斑技术及其相关应用[J]. 实验力学，2023，38(6)：675-687.(GENG Chuanqing，LI Yangyng，LIU Han，et al. Techniques of speckle fabrication and its application for low temperature digital image correlation[J]. Journal of Experimental Mechanics，2023，38(6)：675-687.(in Chinese))
[15]	GAO G，YAO W，XIA K，et al. Investigation of the rate dependence of fracture propagation in rocks using digital image correlation (DIC) method[J]. Engineering Fracture Mechanics，2015，138：146-155.
[16]	VARGAS R，NEGGERS J，CANTO R B，et al. Comparison of two full-field identification methods for the wedge splitting test on a refractory[J]. Journal of the European Ceramic Society，2018，38(16)：5 569-5 579.
[17]	OWENS A T，TIPPUR H V. An image processing technique to identify crack tip position and automate fracture parameter extraction using dic：application to dynamic fracture[J]. Experimental Mechanics，2022，63(3)：445-466.
[18]	LI Y J，NI T，ZHANG F，et al. U-Net learning for the automatic identification of the sandstone crack tip position to determine mixed-mode stress intensity factors utilizing digital image correlation method[J]. Theoretical and Applied Fracture Mechanics，2023，127：104028.
[19]	XIA B W，MA Z K，HU H R，et al. A prediction method of stress intensity factor for mode-I crack in coal rock based on deep learning[J]. Theoretical and Applied Fracture Mechanics，2022，122：103645.
[20]	CINAR A F，BARHLI S M，HOLLIS D，et al. An autonomous surface discontinuity detection and quantification method by digital image correlation and phase congruency[J]. Optics and Lasers in Engineering，2017，96：94-106.
[21]	ROUX S，RéTHORé J，HILD F. Digital image correlation and fracture：an advanced technique for estimating stress intensity factors of 2D and 3D cracks[J]. Journal of Physics D：Applied Physics，2009，42(21)：214004.
[22]	SUBRAMANYAM REDDY M，RAMESH K，THIYAGARAJAN A. Evaluation of mode-I SIF，T-stress and J-integral using displacement data from digital image correlation - Revisited[J]. Theoretical and Applied Fracture Mechanics，2018，96：146-159.
[23]	CHI Y，ZHAO W，PAN B. Gray level residual field：an effective metric for pixelwise matching quality evaluation in local digital image correlation[J]. Measurement Science and Technology，2023，34(7)：075018.
[24]	BLABER J，ADAIR B，ANTONIOU A. Ncorr：Open-Source 2D digital image correlation matlab software[J]. Experimental Mechanics，2015，55(6)：1 105-1 122.
[25]	EREMIN A，LYUBUTIN P，PANIN S，et al. Application of digital image correlation and Williams series approximation to characterize mode I stress intensity factor[J]. Acta Mechanica，2022，233(12)：5 089-5 104.