岩石节理三维表面形貌精细描述与粗糙度定量确定方法的研究

doi:10.13722/j.cnki.jrme.2016.0569

Abstract
Figure/Table
References (19)
Related Citation (15)

[1]	葛云峰，唐辉明，黄磊，等.岩体结构面三维粗糙度系数表征新方法[J]. 岩石力学与工程学报，2012，31(12)：2 508-2 517.(GE Yunfeng，TANG Huiming，HUANG Lei，et al. A new representation method for three-dimensional joint roughness coefficient of rock mass discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(12)：2 508-2 517.(in Chinese)
[2]	杜时贵.岩体结构面的工程性质[M]. 北京：地震出版社，1999：204-205.(DU Shigui. Engineering properties of rock joints[M]. Beijing：Seismic Press，1999：204-205.(in Chinese))
[3]	BARTON N. Modelling rock joint behaviour from in-situ block tests：implications for nuclear waste repository design[R]. Columbus：Office
	of Nuclear Waste Isolation，1982.
[4]	BARTON N，CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Journal of Rock Mechanics，1977，10(1)：1-54.
[5]	KULATILAKE P H S W，UM J，PAN G. Requirement for accurate quantification of self-affine roughness using the line scaling method[J]. Rock Mechanics and Rock Engineering，1997，30(4)：181-206.
[6]	OREY S. Gaussian sample functions and Hausdorff dimension of level crossing[J]. Probability Theory and Related Fields，1970，15(3)：249-256.
[7]	SAYLES R S，TOMAS R R. The spatial representation of surface roughness by means of the structure functions，a practical alternative to correlation[J]. Wear，1977，42(1)：263-276.
[8]	BERRY M V，LEWIS Z V. On the Weierstrass-Mandelbrot fractal function[J]. Mathematical，Physical and Engineering Sciences，1980，370：459-484.
[9]	MALINVERNO A. A simple method to estimate the fractal dimension of a self-affine series[J]. Geophysical Research Letters，1990，17(11)：1 953-1 956.
[10]	杜时贵，唐辉明. 岩体断裂粗糙度系数的各向异性研究[J]. 工程地质学报，1993，1(2)：32-42.(DU Shigui，TANG Huiming. A study on the anisotropy of joint roughness coefficient in rockmass[J]. Journal of Engineering Geology，1993，1(2)：32-42.(in Chinese))
[11]	BELEM T，HOMAND-ETIENNE F，SOULEY M. Quantitative parameters for rock joint surface roughness[J]. Rock Mechanics and Rock Engineering，2000，33(4)：217-242.
[12]	李庆松，杜守继. 经历剪切变形历史的岩石节理表面粗糙特性分析[J]. 岩土力学，2004，25(6)：850-855.(LI Qingsong，DU Shouji. Surface roughness analysis of rock joints under different shear deformation histories[J]. Rock and Soil Mechanics，2004，25(6)：850-855.(in Chinese))
[13]	ESAKI T，DU S J，MITANI Y，et al. Development of a shear-flow test apparatus and determination of coupled properties for a single rockjoint[J]. International Journal of Rock Mechanics and Mining Sciences，1999，36(5)：641-650.
[14]	DU S J. Experimental and theoretical research on geometrical- mechanical-hydromechanical characteristics of rock joints[Ph. D. Thesis][D]. Shanghai：Tongji University，1997.
[15]	DU S J，LIU H，SHEN S L，et al. Simulation of the compression and flow process in a rock joint by using GIS[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(3)：1-6.
[16]	曹平，范祥，蒲成志，等. 节理剪切试验及其表面形貌特征变化分析[J]. 岩石力学与工程学报，2011，30(3)：480-485.(CAO Ping，FAN Xiang，PU Chengzhi，et al. Shear test of joint and analysis of morphology characteristic evolution of joint surface[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(3)：480-485.(in Chinese))
[17]	DONG W P，SULLIVAN P J，STOUT K J. Comprehensive study of parameters for characterization 3-D surface topography-III(IV)[J]. Wear，1994，178(1)：29-60.
[18]	周枝华，杜守继. 岩石节理表面几何特性的三维统计分析[J]. 岩土力学，2005，26(8)：1 227-1 232.(ZHOU Zhihua，DU Shouji. 3D statistic analysis of geometrical properties of a rock joint[J]. Rock and Soil Mechanics，2005，26(8)：1 227-1 232.(in Chinese))
[19]	BARTON N，BANDIS S. Effects of block size on the shear behavior of jointed rock[C]// Proceedings of the 23rd U.S. Symposium on Rock Mechanics. Berkeley：[s. n.]，1982：739-760.