[1] 谢和平，鞠  杨，黎立云，等. 岩体变形破坏过程的能量机制[J]. 岩石力学与工程学报，2008，27(9)：1 729–1 740.(XIE Heping，JU Yang，LI Liyun，et al. Energy mechanism of deformation and failure of rock mass[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(9)：1 729–1 740.(in Chinese))

[2] 裴向军，黄润秋，李正兵，等. 锦屏一级水电站左岸卸荷拉裂松弛岩体灌浆加固研究[J]. 岩石力学与工程学报，2011，30(2)：284–288.(PEI Xiangjun，HUANG Runqiu，LI Zhengbing，et al. Research on grouting reinforcement of unloading fractured loose rock mass in left bank of Jinping I hydropower station[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(2)：284–288.(in Chinese))

[3] 李朝政，沈  蓉，李  伟，等. 小湾水电站坝基卸荷岩体抗剪特性研究[J]. 岩土力学，2008，29(增1)：485–490.(LI Chaozheng，SHEN Rong，LI Wei，et al. Research on shear resistance of dam foundation unloading rockmass of Xiaowan hydropower station[J]. Rock and Soil Mechanics，2008，29(Supp.1)：485–490.(in Chinese))

[4] 宋肖冰，石安池，郑伟锋，等. 金沙江白鹤滩水电站坝区左岸边坡变形特征及机制分析[J]. 岩石力学与工程学报，2012，31(增2)：3 533–3 538.(SONG Xiaobing，SHI Anchi，ZHENG Weifeng，et al. Analysis of slope deformation characteristics and mechanism in left bank of Baihetan hydropower station Jinsha River[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(Supp.2)：3 533–3 538.(in Chinese))

[5] PATTON F D. Multiple modes of shear failure in rock[C]// Proceedings of 1st ISRM Congress. Lisbon：[s.n.]，1966：509–513.

[6] BARTON N，CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Rock Mechanics，1977，10(1)：1–54.

[7] 夏才初，孙宗颀，潘长良. 含波纹度节理的形貌和剪切性质研究[C]// 中国岩石力学与工程学会第三次大会论文集，北京：中国科学技术出版社，1994：34–42.(XIA Caichu，SUN Zongqi，PAN Changliang. A study of topography and shear property of joints contain waviness[C]// The 3rd Symposium on the Chinese Academy of Rock Mechanics and Engineering. Beijing：China Science and Technology Press，1994：34–42.(in Chinese))

[8] 夏才初，唐志成，宋英龙，等. 节理峰值剪切位移及其影响因素分析[J]. 岩土力学，2011，32(6)：1 654–1 658.(XIA Caichu，TANG Zhicheng，SONG Yinglong，et al. Analysis of relationship between joint peak shear displacement and its influence factor[J]. Rock and Soil Mechanics，2011，32(6)：1 654–1 658.(in Chinese))

[9] 唐志成，刘泉声，刘小燕. 节理的剪切力学性质与含三维形貌参数的剪切强度准则比较研究[J]. 岩土工程学报，2014，36(5)：873–879.(TANG Zhicheng，LIU Quansheng，LIU Xiaoyan. Shear behavior of rock joints and comparative study on shear strength criteria with three-dimensional morphology parameters[J]. Chinese Journal of Geotechnical Engineering，2014，36(5)：873–879.(in Chinese))

[10] 唐志成，夏才初，丁增志. 非贯通类节理岩体剪切变形规律分析[J]. 岩土力学，2011，32(8)：2 353–2 358.(TANG Zhicheng，XIA Caichu，DING Zengzhi. Analysis of shear deformation law for intermittent jointed rock mass[J]. Rock and Soil Mechanics，2011，32(8)：2 353–2 358.(in Chinese))

[11] 沈明荣，张清照. 岩体结构面的剪切试验研究[J]. 地下空间与工程学报，2010，6(1)：38–43.(SHEN Mingrong，ZHANG Qingzhao. Study on shearing test of rock mass discontinuity[J]. Chinese Journal of Underground Space and Engineering，2010，6(1)：38–43.(in Chinese))

[12] INDRARATNA B，PREMADASA W，BROWN E T，et al. Shear strength of rock joints influenced by compacted infill[J]. International Journal of Rock Mechanics and Mining Sciences，2014，70：296–307.

[13] XU D，FENG X，CUI Y. A simple shear strength model for interlayer shear weakness zone[J]. Engineering Geology，2012，147–148：114–123.

[14] ZHUANG X，CHUN J，ZHU H. A comparative study on unfilled and filled crack propagation for rock-like brittle material[J]. Theoretical and Applied Fracture Mechanics，2014，72：110–120.

[15] DE TOLEDO P E，DE FREITAS M H，GCOL C. Laboratory testing and parameters controlling the shear strength of filled rock joints[J]. Géotechnique，1993，43(1)：1–19.

[16] 史  玲，蔡美峰，赵  坚. 充填节理破坏机制及实验[J]. 北京科技大学学报，2012，34(3)：253–259.(SHI Ling，CAI Meifeng，ZHAO Jian. Fracture mechanism and experiment of infilled rock joints[J]. Journal of University of Science and Technology Beijing，2012，34(3)：253–259.(in Chinese))

[17] 肖卫国，兑关锁，朱玉萍，等. 充填单节理岩体本构模型研究[J]. 岩石力学与工程学报，2010，29(增2)：3 463–3 468.(XIAO Weiguo，DUI Guansuo，ZHU Yuping，et al. Study of constitutive model for single infilled jointed rock mass[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(Supp.2)：3 463–3 468.(in Chinese))

[18] 孙辅庭，佘成学，万利台. 充填水泥浆岩石节理峰值剪切强度模型[J]. 岩石力学与工程学报. 2014，33(12)：2 481–2 489.(SUN Futing，SHEN Chengxue，WAN Litai. A peak shear strength model for cement filled rock joints[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(12)：2 481–2 489.(in Chinese))

[19] INDRARATNA B，JAYANATHAN M，BROWN E T. Shear strength model for overconsolidated clay-infilled idealised rock joints[J]. Géotechnique，2008，58(1)：55–65.

[20] INDRARATNA B，OLIVEIRA D A F，BROWN E T. A shear-displacement criterion for soil-infilled rock discontinuities[J]. Géotechnique，2010，60(8)：623–633.

[21] INDRARATNA B，OLIVEIRA D A F，BROWN E T，et al. Effect of soil-infilled joints on the stability of rock wedges formed in a tunnel roof[J]. International Journal of Rock Mechanics and Mining Sciences，2010，47(5)：739–751.

[22] KHOSRAVI A，SEREJ A D，MOUSAVI S M，et al. Effect of hydraulic hysteresis and degree of saturation of infill materials on the behavior of an infilled rock fracture[J]. International Journal of Rock Mechanics and Mining Sciences，2016，88：105–114.

[23] HU X Z，WITTMANN F H. Fracture energy and fracture process zone[J]. Materials and Structures，1992，25(6)：319–326.

[24] HU X Z，DUAN K. Influence of fracture process zone height on fracture energy of concrete[J]. Cement and Concrete Research，2004，34(8)：1 321–1 330.

[25] WANG Y，HU X. Benefits of short kevlar fiber reinforcement at the interface for repair of concrete-like materials[J]. Journal of Materials in Civil Engineering，2016，28(9)：4016087(6)

[26] DUAN K，HU X Z，WITTMANN F H. Boundary effect on concrete fracture and non-constant fracture energy distribution[J]. Engineering Fracture Mechanics，2003，70：2 257–2 268.

[27] DONG W，WU Z M，ZHOU X M. Fracture mechanisms of rock-concrete interface：experimental and numerical[J]. Journal of Engineering Mechanics，2016，142(7)：04016040

[28] 谢和平，彭瑞东，鞠  杨，等. 岩石破坏的能量分析初探[J]. 岩石力学与工程学报，2005，24(15)：2 603–2 608.(XIE Heping，PENG Ruidong，JU Yang，et al. On energy analysis of rock failure[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(15)：2 603–2 608.(in Chinese))

[29] 黄  达，谭  清，黄润秋. 高应力强卸荷条件下大理岩损伤破裂的应变能转化过程机制研究[J]. 岩石力学与工程学报，2012，31(12)：2 483–2 493.(HUANG Da，TAN Qing，HUANG Runqiu. Mechanism of strain energy conversion process for marble damage and fracture under high stress and rapid unloading[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(12)：2 483–2 493.(in Chinese))

[30] RILEM. Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams[J]. Materials and Structures，1985，18(4)：287–290.

[31] LEE M K，YOO S W，OH B H. State of art analysis for the fracture energy of concrete：revisited[C]// The 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures. [S. l.]：[s. n.]，2016：1–10.

[32] MURALIDHARA S，PRASAD B K R，ESKANDARI H，et al.. Fracture process zone size and true fracture energy of concrete using acoustic emission[J]. Construction and Building Materials，2010，24(4)：479–486.

[33] KARIHALOO B L，MURTHY A R，IYER N R. Determination of size-independent specific fracture energy of concrete mixes by the tri-linear model[J]. Cement and Concrete Research，2013，49：82–88.

[34] HU X Z，WITTMANN F H. Size effect on toughness induced by crack close to free surface[J]. Engineering Fracture Mechanics，2000，65(2/3)：209–221.

[35] DUAN K，HU X Z，WITTMANN F H. Boundary effect on concrete fracture and non-constant fracture energy distribution[J]. Engineering Fracture Mechanics，2003，70(16)：2 257–2 268.