大倾角综采工作面液压支架刚柔组合倾覆力矩平衡的支护原理及其应用

doi:10.13722/j.cnki.jrme.2017.0798

Abstract
Figure/Table
References (16)
Related Citation (15)

Download: PDF (407 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

Based on the characteristics of powered support instability，the attitude instability of powered support and its control method had been studied particularly. This paper presented a 3D supporting mechanism from the balance of overturning moment considering self-supporting，adjacent-pulling，bottom-pushing and top-pressing of powered support and gave the concept of rigid-flexible compositing coefficient. The instability condition of powered support was calculated by the methods of overturning moment and the support regulating ability was evaluated by rigid-flexible compositing coefficient. According to the static equilibrium condition，the matrix equations of powered support in sliding and overturning attitude instability were established. On this foundation，the paper quantitatively analyzed the support stability and its regulating ability in large dip angle coal seam，established the stability coupled equation between supports and surrounding rocks，and concluded the basic conditions for maintaining the stability of powered shield support in large dip angle mining face.

Key words： mining engineering powered support stability coupling overturning moment large dip angle coal seam

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Guofa1
	2
	XU Yajun1
	2
	LI Dingyi1
	2

Cite this article:

WANG Guofa1,2,XU Yajun1, et al. Analysis on supporting principle and its application of powered support in large inclined fully mechanized face based on balance of rigid and flexible combined overturning moment[J]. , 2018, 37(S2): 4125-4133.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2017.0798 OR https://rockmech.whrsm.ac.cn/EN/Y2018/V37/IS2/4125

[1] 李海宁，曹春玲. 急倾斜厚煤层长壁式综放开采技术[J]. 煤炭科学技术，2004，32(2)：31–34.(LI Haining，CAO Chunling. Fully mechanized longwall caving mining technology in deep inclined thick seam[J]. Coal Science and Technology，2004，32(2)：31–34.(in Chinese))

[2] 林忠明，陈忠辉，谢俊文，等. 大倾角综放开采液压支架稳定性分析与控制措施[J]. 煤炭学报，2004，29(3)：264–268.(LIN Zhongming，CHEN Zhonghui，XIE Junwen，et al. Stability analysis and control measures of powered supports in greater inclined fully- mechanized coal seam[J]. Journal of China Coal Society，2004，29(3)：264–268.(in Chinese))

[3] 伍永平. 大倾角煤层开采“顶板–支护–底板”系统稳定性及动力学模型[J]. 煤炭学报，2004，29(5)：527–531.(WU Yongping. Dynamic model and stability of system“roof-support-floor”in steeply dipping seam mining[J]. Journal of China Coal Society，2004，29(5)：527–531.(in Chinese))

[4] 范志忠，毛德兵，徐刚，等. 大倾角大采高综采面倾向长度尺寸效应分析[J]. 煤炭学报，2016，41(3)：581–585.(FAN Zhizhong，MAO Debing，XU Gang，et al. Analysis on the scale effect in the fully mechanized mining panel width with large mining height and dip angle[J]. Journal of China Coal Society，2016，41(3)：581–585.(in Chinese))

[5] 解盘石，伍永平，王红伟，等. 大倾角煤层长壁采场倾斜砌体结构与支架稳定性分析[J]. 煤炭学报，2012，37(8)：1 275–1 280.(XIE Panshi，WU Yongping，WANG Hongwei，et al. Stability analysis of incline masonry structure and support around longwall mining face area in steeply dipping seam[J]. Journal of China Coal Society，2012，37(8)：1 275–1 280.(in Chinese))

[6] 王金安，焦军灵，程文东，等. 论大倾角长壁综放工作面圆弧段对支架稳定性的控制作用[J]. 煤炭学报，2015，40(10)：2 361–2 369. (WANG Jin¢an，JIAO Junling，CHENG Wendong，et al. Roles of arc segment in controlling the support stability in longwall fully mechanized top coal caving mining face of steeply inclined coal seam[J]. Journal of China Coal Society，2015，40(10)：2 361–2 369.(in Chinese))

[7] 王国法. 工作面支护与液压支架技术理论体系[J]. 煤炭学报，2014，39(8)：1 593–1 601.(WANG Guofa. Theory system of working face support system and hydraulic roof support technology[J]. Journal of China Coal Society，2014，39(8)：1 593–1 601.(in Chinese))

[8] 王国法，庞义辉. 液压支架与围岩耦合关系及应用[J]. 煤炭学报，2015，40(1)：30–34.(WANG Guofa，PANG Yihui. Relationship between hydraulic support and surrounding rock coupling and its application. Journal of China Coal Society，2015，40(1)：30–34.(in Chinese))

[9] 章之燕. 大倾角综放液压支架稳定性动态分析和防倒防滑措施[J]. 煤炭学报，2007，32(7)：705–709.(ZHANG Zhiyan. Dynamic analysis on stability of hydraulic powered support in deep inclined fully mechanized wall and prevention slips measures[J]. Journal of China Coal Society，2007，32(7)：705–709.(in Chinese))

[10] 谢生荣，张广超，张守宝，等. 大倾角孤岛综采面支架–围岩稳定性控制研究[J]. 采矿与安全工程学报，2013，30(3)：343–347.(XIE Shengrong，ZHANG Guangchao，ZHANG Shoubao，et al. Stability control of support-surrounding rock in the large inclination fully mechanized inland face[J]. Journal of Mining and Safety Engineering，2013，30(3)：343–347.(in Chinese))

[11] 孔令海，姜福兴，王存文. 特厚煤层综放采场支架合理工作阻力研究[J]. 岩石力学与工程学报，2010，29(11)：2 312–2 318.(KONG Linghai，JIANG Fuxing，WANG Cunwen. Study of reasonable working resistance of support in fully-mechanized sublevel caving face in extra-thick coal seam[J]. Chinese Journal of Rock Mechanics and Engineering[J]. 2010，29(11)：2 312–2 318.(in Chinese))

[12] 阎建华. 综采工作面支架初撑力与围岩相互作用关系分析[J]. 煤炭科学技术，2014，42(4)：12–15.(YAN Jianhua. Analysis on interaction relationship between initial support load of powered support and surrounding rock in fully-mechanized coal mining face[J]. Coal Science and Technology，2014，42(4)：12–15.(in Chinese))

[13] 徐亚军，王国法，任怀伟. 液压支架与围岩刚度耦合理论与应用[J]. 煤炭学报，2015，40(11)：2 528–2 533.(XU Yajun，WANG Guofa，REN Huaiwei. Theory of coupling relationship between surrounding rocks and powered support[J]. Journal of China Coal Society，2015，40(11)：2 528–2 533.(in Chinese))

[14] 王家臣，王蕾，郭尧. 基于顶板与煤壁控制的支架阻力的确定[J]. 煤炭学报，2014，39(8)：1 619–1 624.(WANG Jiachen，WANG Lei，GUO Yao. Determining the support capacity based on roof and coal wall control. Journal of China Coal Society，2014，39(8)：1 619– 1 624.(in Chinese))

[15] 邓军，王凯，翟小伟，等. 大倾角大采高综采工作面火灾治理与防复燃技术[J]. 煤矿安全，2014，45(1)：109–111.(DENG Jun，WANG Kai，ZHAI Xiaowei，et al. Fire controlling and after- combustion preventing technology application in large inclination and large height mining working face[J]. Safety in Coal Miner，2014，45(1)：109–111.(in Chinese))

[16] 王国法. 煤矿综采自动化成套技术与装备创新和发展[J]. 煤炭科学技术，2013，41(11)：1–5.(WANG Guofa. Innovation and development on automatic completed set technology and equipment of fully- mechanized coal mining face，Coal Science and Technology，2013，41(11)：1–5.(in Chinese))