主应力轴旋转分析及WB模型的应用

doi:10.13722/j.cnki.jrme.2017.0803

Abstract
Figure/Table
References (33)
Related Citation (15)

Download: PDF (664 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

The unignorable volume plastic strain and irreversible shear strain would be produced due to the rotation of the principle stress axes. The process of rotation of principle stress axes is decomposed in order to explore the causes of the rotation of the principle stress axes. The step for rotation of principle stress axes is divided into a process that the superposition of self rotation to XYZ axes in physical space. The relationship between rotation angle of principle stress axes and arctangent value of ratio between shear stress and normal stress in Mohr¢s circle is established. The rotation process around single axes for cubical unit is analyzed in physical space. The pure rotation of principle stress axes in cyclic loading condition and round-trip loading condition and conventional triaxial compression condition are modeled by using the proposed incremental model. The simulation result has been shown that it is effective to use the proposed model to predict the deformation of geomaterials under rotation of principle stress axes condition.

Key words： soil mechanics rotation of the principle stress axes volume plastic strain Mohrs circle cyclic loading triaxial compression

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WAN Zheng
	KANG Fuzhong
	ZHAO Xiaoguang
	GUO Jinxue

Cite this article:

WAN Zheng,KANG Fuzhong,ZHAO Xiaoguang, et al. Analysis of rotation for principal stress axes and application of WB model[J]. , 2018, 37(S2): 4308-4319.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2017.0803 OR https://rockmech.whrsm.ac.cn/EN/Y2018/V37/IS2/4308

[1] WOOD D M. Truly triaxial stress-strain behavior of Kaolin[C]// PALMER A C ed. Proceedings of the Symposium on Plasticity and Soil Mechanics. Lodon：John Wiley and Son，1973：67–78.

[2] MATSUOKA H，SUZUKI Y，MURATA T. A constitutive model for soils evaluating principal stress rotation and its application to some deformation problems[J]. Soils and Foundations，1990，30(1)：142–154.

[3] ODA M，KONISHI J. Microscopic deformation mechanism of granular material in simple shear[J]. Soils and Foundations，1974，14(4)：25–38.

[4] TOWHATA I，ISHIHARA K. Undrained strength of sand undergoing cyclic rotation of principal stress axes[J]. Soils and Foundations，1985，25(2)：135–147.

[5] ISHIHARA K，TOWHATA I. Sand response to cyclic rotation of principal stress directions as induced by wave loads[J]. Soils and Foundations，1983，23(4)：11–26.

[6] MIURA K，TOKI S，MIURA S. Deformation prediction for anisotropic sand during the rotation of principal stress axes[J]. Soils and Foundations，1986，26(3)：42–56.

[7] 严佳佳，周建，龚晓南，等. 主应力轴纯旋转条件下原状黏土变形特性研究[J]. 岩土工程学报，2014，36(3)：474–481.(YAN Jiajia，ZHOU Jian，GONG Xiaonan，et al. Deformation behavior of intact clay under pure principal stress rotation[J]. Chinese Journal of Geotechnical Engineering，2014，36(3)：474–481.(in Chinese))

[8] 李校兵，谷川，蔡袁强. 循环偏应力和循环围压耦合应力路径下饱和软黏土动模量衰减规律研究[J]. 岩土工程学报，2014，36(7)：1 218–1 226.(LI Xiaobing，GU Chuan，CAI Yuanqiang. Dynamic modulus degradation for soft saturated clay under coupling stress paths of cyclic deviatoric stress and cyclic confining pressure[J]. Chinese Journal of Geotechnical Engineering，2014，36(7)：1 218–1 226.(in Chinese))

[9] MATSUOKA H，SAKAKIBARA K. A constitutive model for sands and clays evaluating principal stress rotation[J]. Soils and Foundations，1987，27(4)：73–88.

[10] 刘元雪，郑颖人，陈正汉. 含主应力轴旋转的土体一般应力–应变关系[J]. 应用数学和力学，1998，19(5)：407–413.(LIU Yuanxue，ZHENG Yingren，CHEN Zhenghan. The general stress strain relation of soils involving the rotation of principal stress axes[J]. Applied Mathematics and Mechanics，1998，19(5)：407–413.(in Chinese))

[11] 董彤，刘元雪，郑颖人. 考虑主应力轴旋转的土体本构关系研究进展[J]. 应用数学和力学，2013，34(4)：327–335.(DONG Tong，LIU Yuanxue，ZHENG Yingren. Research progress of the soil constitutive relation considering principal stress axes rotation[J]. Applied Mathematics and Mechanics，2013，34(4)：327–335.(in Chinese))

[12] 陈生水，沈珠江，郦能惠. 复杂应力路径下无黏性土的弹塑性数值模拟[J]. 岩土工程学报，1995，17(2)：20–28.(CHEN Shengshui，SHEN Zhujiang，LI Nenghui. A eiastoplastic model for cohesionless soils under complex stress paths[J]. Chinese Journal of Geotechnical Engineering，1995，17(2)：20–28.(in Chinese))

[13] 史宏彦，谢定义，汪闻韶. 平面应变条件下主应力轴旋转产生的应变[J]. 岩土工程学报，2001，23(2)：162–166.(SHI Hongyan，XIE Dingyi，WANG Wenshao. Strain due to rotation of principal stress axes under plane strain condition[J]. Chinese Journal of Geotechnical Engineering，2001，23(2)：162–166.(in Chinese))

[14] PUZRIN A M，KIRSCHENBOIM E. Kinematic hardening model for overconsolidated clays[J]. Computers and Geotechnics，2001，28(1)：1–36.

[15] TSUTSUMI S，HASHIGUCHI K. General non-proportional loading behavior of soils[J]. International Journal of Plasticity，2005，21(10)：1 941–1 969.

[16] HASHICGUCHI K. Subloading surface model in unconventional plasticity[J]. International Journal of Solids and Structures，1989，25(8)：917–945.

[17] HASHIGUCHI K，OZAKI S，OKAYASU T. Unconventional friction theory based on the subloading surface concept[J]. International Journal of Solids and Structures，2005，42(5)：1 705–1 727.

[18] OZAKI S，HASHIGUCHI K. Numerical analysis of stick-slip instability by a rate-dependent elastoplastic formulation for friction[J]. Tribology International，2010，43(11)：2 010–2 133.

[19] GAO Z W，ZHAO J D. A non-coaxial critical-state model for sand accounting for fabric anisotropy and fabric evolution[J]. International Journal of Solids and Structures，2017，106：200–212.

[20] GAO Z W，ZHAO J D. Constitutive modeling of anisotropic sand behavior in monotonic and cyclic loading[J]. Journal of Engineering Mechanics，2015，141(8)：1–15.

[21] YAO Y P，TIAN Y，GAO Z W. Anisotropic UH model for soils based on a simple transformed stress method[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2017，41(1)：54–78.

[22] LI X S，DAFALIAS Y F. Anisotropic critical state theory：Role of fabric[J]. Journal of Engineering Mechanics，2012，138(3)：263–275.

[23] LI X S，LI X. Micro-macro quantification of the internal structure of granular materials[J]. Journal of Engineering Mechanics，2009，135(7)：641–656.

[24] DAFALIAS Y F，MANZARI M T. Simple plasticity sand model accounting for fabric change effects[J]. Journal of Engineering Mechanics，2004，130(6)：622–634.

[25] DAFALIAS Y F，PAPADIMITRIOU A G，LI X S. Sand plasticity model accounting for inherent fabric anisotropy[J]. Journal of Engineering Mechanics，2004，130(11)：1 319–1 333.

[26] TONG Z X，YU Y L，ZHANG J M，et al. Deformation behavior of sands subjected to cyclic rotation of principal stress axes[J]. Chinese Journal of Geotechnical Engineering，2008，30(8)：1 196–1 202.

[27] 童朝霞，张建民，张嘎. 考虑应力主轴循环旋转效应的砂土弹塑性本构模型[J]. 岩石力学与工程学报，2009，28(9)：1 918–1 927. (TONG Zhaoxia，ZHANG Jianmin，ZHANG Ga. An elastoplastic constitutive model of sands considering cyclic rotation of principal stress axes[J]. Chinese Journal of Rock Mechanics and Engineering，2009，28(9)：1 918–1 927.(in Chinese))

[28] 黄茂松，杨超，崔玉军. 循环荷载下非饱和结构性土的边界面模型[J]. 岩土工程学报，2009，31(6)：817–823.(HUANG Maosong，YANG Chao，CUI Yujun. Elasto-plastic bounding surface model for unsaturated soils under cyclic loading[J]. Chinese Journal of Geotechnical Engineering，2009，31(6)：817–823.(in Chinese))

[29] 万征，秋仁东，赵晓光. 考虑主应力轴旋转作用的一个增量模型[J]. 岩石力学与工程学报，2018(待刊).(WAN Zheng，QIU Rendong，ZHAO Xiaoguang. An incremental model considering the effect of rotation for principal axes[J]. Chinese Journal of Rock Mechanics and Engineering，2018(to be Pressed).(in Chinese))

[30] LUO T，YAO Y P，CHU J. Asymptotic state behaviour and its modeling for saturated sand[J]. Science China-Technological Sciences，2009，52(8)：2 350–2 358.

[31] 路德春，姚仰平. 砂土的应力路径本构模型[J]. 力学学报，2005，37(4)：451–459.(LU Dechun， YAO Yangping. Constitutive model of sand considering complex stress paths[J]. Chinese Journal of Theoretical and Applied Mechanics，2005，37(4)：451–459.(in Chinese))

[32] 路德春，罗汀，姚仰平. 砂土应力路径本构模型的试验验证[J]. 岩土力学，2005，26(5)：717–722.(LU Dechun，LUO Ting，YAO Yangping. Test validating of constitutive model of sand considering complex stress path[J]. Rock and Soil Mechanics，2005，26(5)：717–722.(in Chinese))

[33] SUN D A，HUANG W X，SHENG D C，et al. An elastoplastic model for granular materials exhibiting particle crushing[J]. Key Engineering Materials，2007，341：1 273–1 278.