基于3种破坏类型的岩石损伤软化统计模型

doi:10.13722/j.cnki.jrme.2015.0003

Abstract
Figure/Table
References (9)
Related Citation (15)

Download: PDF (1583 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

Uniaxial and triaxial compression mechanical tests were carried out to study the mechanical properties and constitutive relation of rock in post peak state. Based on the different stages and different failure types of rock in the uniaxial and triaxial compression mechanical tests，“segmentation constitutive model” and “damage softening statistic model in different failure types” were built. Yield point，peak point and residual strength point were used to divide the process into three stages in segmentation constitutive model，and the function of constitutive relation was founded. The failure types of rock in compression were divided into tensile failure in low confining pressure，shear failure in high confining pressure，and tensile-shear composite failure in moderate or low confining pressure in the damage softening statistic mode in different failure type，circumferential strain，shear strain and volumetric strain were chosen as damage variables to provide constitutive models，which were proved to be better in describing the relation of stress and strain of rock in the pre-peak and post-peak states，and revealing the damage development process of rock.

Key words： rock mechanics post peak tensile failure shear failure tensile-shear failure constitutive relation

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Dong1
	ZHANG Jing2
	CHEN Qiang1
	LIU Changwu3

Cite this article:

WANG Dong1,ZHANG Jing2,CHEN Qiang1, et al. DAMAGE SOFTENING STATISTIC MODEL OF ROCK BASED ON THREE FAILURE TYPES[J]. , 2015, 34(S2): 3759-3765.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2015.0003 OR https://rockmech.whrsm.ac.cn/EN/Y2015/V34/IS2/3759

[1] VARDOULAKIS I. Shear band inclination and shear modulus of sand in biaxial test[J]. International Journal for Numerical and Analytical Methods in Geomechanics，1980，4(1)：103–119.

[2] VERMEER P A. The orientation of shear bands in biaxial tests[J]. Geotechnique，1990，40(2)：223–236.

[3] LEMAITRE J. How to use damage mechanics[M]. [S.1.]：Nuclear Engineering and Design，1984：47–65.

[4] 谢和平，彭瑞东，鞠杨，等. 基于断裂力学与损伤力学的岩石强度理论研究进展[J]. 自然科学进展，2004，14(10)：1 086–1 092. (XIE Heping，PENG Ruidong，JU Yang，et al．Progress in strength theory of rocks based on fracture mechanics and damage mechanics[J]. Progress in Nature，2004，14(10)：1 086–1 092.(in Chinese))

[5] 曹文贵，方祖烈，唐学军. 岩石损伤软化统计本构模型之研究[J].岩石力学与工程学报，1998，17(6)：628–633.(CAO Wengui，FANG Zulie，TANG Xuejun. A study of statistical constitutive model for soft and damage rock[J]. Chinese Journal of Rock Mechanics and Engineering，1998，17(6)：628–633. (in Chinese))

[6] 王东，王丁，韩小刚，等. 侧向变形控制下的灰岩破坏规律及峰后本构关系[J]. 煤炭学报，2010，35(12)：2 022–2 027.(WANG Dong，WANG Ding，HAN Xiaogang，et al. Limestone failure law and post-failure constitutive relation in the control of lateral deformation[J]. Journal of China Coal Society，2010，35(12)：2 022–2 027.(in Chinese))

[7] 王东，刘长武，王丁，等. 三向应力作用下典型岩石破坏预警及峰后特性研究[J]. 西南交通大学学报，2012，47(1)：90–96. (WANG Dong，LIU Changwu，WANG Ding，et al. Research on the failure predicting and post-failure behavior of typical rock under triaxial stress[J]. Journal of Southwest Jiaotong University，2012，47(1)：90–96.(in Chinese))

[8] 王东，刘长武，王丁，等. 复杂应力条件下岩石的拉剪变形及破坏准则研究[J]. 四川大学学报，2012，44(2)：31–35.(WANG Dong，LIU Changwu，WANG Ding，et al. Research on the tension-shear deformation and failure criterion of rock under complex stress[J]. Journal of Sichuan University，2012，44(2)：31–35.(in Chinese))

[9] 刘齐建，杨林德，曹文贵. 岩石统计损伤本构模型及其参数反演[J].岩石力学与工程学报，2005，24(4)：616–621.(LIU Qijian，YANG Linde，CAO Wengui. Statistical damage constitutive model for rock and back analysis of its parameters[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(4)：616–621.(in Chinese))