|
|
|
| A characterization model for ductile-brittle behavior of rocks under true triaxial stress conditions |
| ZHENG Zhi1, 2, 3*, ZHANG Yihuai1, ZHENG Hong3, HUANG Xiaohua1, WANG Wei4, WANG Zhaofeng3 |
(1. School of Civil Engineering and Architecture, Guangxi University, Nanning, Guangxi 530004, China; 2. Guangxi Key Laboratory of Disaster Prevention and Engineering Safety, Guangxi University, Nanning, Guangxi 530004, China; 3. State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences,
Wuhan, Hubei 430071, China; 4. Key Laboratory of Ministry of Education for Geomechanics and
Embankment Engineering, Hohai University, Nanjing, Jiangsu 210098, China) |
|
|
|
|
Abstract Excavation in underground engineering triggers complex true triaxial stress redistribution, resulting in intricate ductile-brittle behavior in rocks. However, there is a notable absence of mechanical models that accurately characterize this behavior under true triaxial stress. Therefore, within the framework of irreversible thermodynamics, this study derives a function to describe the nonlinear behavior of rocks and, in conjunction with classical elastoplastic mechanics theory, establishes a three-dimensional elastoplastic damage constitutive model capable of simultaneously capturing plastic hardening and damage softening in rocks. Utilizing the finite element method and the cutting plane projection algorithm, a corresponding user material subroutine (UMAT) was developed using FORTRAN on the ABAQUS platform, facilitating the numerical implementation of the model. Through parameter sensitivity analysis, this research proposes a method for controlling the ductile-brittle transition behavior of rocks by adjusting key parameters (β and ζ). The validity of the proposed model was verified through true triaxial compression tests on sandstone. Comparative results between numerical simulations and experimental data indicate that the model effectively captures the mechanical properties and ductile-brittle transition behavior of rocks under true triaxial stress. Furthermore, the model can be simplified to an ideal elastoplastic model, an elastoplastic hardening model, or an elastoplastic hardening-softening model, demonstrating greater comprehensiveness and general applicability. This work provides a robust theoretical foundation for hazard analysis in underground engineering.
|
|
|
|
|
|
[1] 陆明远，周宏伟，王 军，等. 深部原位多场环境重构概念下岩石力学行为研究进展[J]. 煤炭学报，2025，50(9)：4 135–4 150.(LU Mingyuan，ZHOU Hongwei，WANG Jun，et al. Research progress on rock mechanical behavior under concept of reconstructed deep in-situ multi-physics conditions[J]. Journal of China Coal Society，2025，50(9)：4 135–4 150.(in Chinese))
[2] FENG X T，YANG C X，KONG R，et al. Excavation-induced deep hard rock fracturing：methodology and applications[J]. Journal of Rock Mechanics and Geotechnical Engineering，2022，14(1)：1–34.
[3] 张 勇，邓兴洋，李学华，等. 基于弹性应变能特征的岩爆危险性预测研究[J]. 地下空间与工程学报，2022，18(增1)：305–311.(ZHANG Yong，DENG Xingyang，LI Xuehua，et al. Prediction of rockburst dangerousness based on elastic strain energy characteristics[J]. Chinese Journal of Underground Space and Engineering，2022，18(Supp.1)：305–311.(in Chinese))
[4] 黄景琦，杜修力，马 超，等. 岩石三维强度准则的研究[J]. 工程力学，2018，35(3)：30–40.(HUANG Jingqi，DU Xiuli，MA Chao，et al. Study on three-dimensional strength criterion for rocks[J]. Engineering Mechanics，2018，35(3)：30–40.(in Chinese))
[5] 杜佳慧，李文璞，冯国瑞，等. 基于双剪统一强度准则砂岩真三轴卸荷损伤本构模型研究[J]. 岩石力学与工程学报，2024，43(5)：1 230–1 240.(DU Jiahui，LI Wenpu，FENG Guorui，et al. A true triaxial unloading damage intrinsic model for sandstone based on the double shear unified strength criterion[J]. Chinese Journal of Rock Mechanics and Engineering，2024，43(5)：1 230–1 240.(in Chinese))
[6] 谢和平，高明忠，付成行，等. 深部不同深度岩石脆延转化力学行为研究[J]. 煤炭学报，2021，46(3)：701–715.(XIE Heping，GAO Mingzhong，FU Chenghang，et al. Mechanical behavior of brittle-ductile transition in rocks at different depths[J]. Journal of China Coal Society，2021，46(3)：701–715.(in Chinese))
[7] 韩 强，张希巍，潘鹏志，等. 底板硬岩多轴条件下的力学特性和冲击倾向性[J]. 煤炭学报，2020，45(5)：1 743–1 752.(HAN Qiang，ZHANG Xiwei，PAN Pengzhi，et al. Mechanical properties and impact tendency of hard floor rock under multiaxial conditions[J]. Journal of China Coal Society，2020，45(5)：1 743–1 752.(in Chinese))
[8] 王传乐，杜广印，李二兵，等. 北山深部花岗岩常规三轴压缩条件下的强度参数演化及能量耗散[J]. 岩石力学与工程学报，2021，40(11)：2 238–2 248.(WANG Chuanle，DU Guangyin，LI Erbing，et al. Evolution of strength parameters and energy dissipation of Beishan deep granite under conventional triaxial compression[J]. Chinese Journal of Rock Mechanics and Engineering，2021，40(11)：2 238–2 248.(in Chinese))
[9] YANG K，YAN Q X，ZHANG C，et al. Study on mechanical properties and damage evolution of carbonaceous shale under triaxial compression with acoustic emission[J]. International Journal of Damage Mechanics，2021，30(6)：899–922.
[10] 刘卫华，王 洋，陈祖庆，等. 侏罗系陆相页岩各向异性动静态弹性参数建模[J]. 地球物理学报，2025，68(1)：213–228.(LIU Weihua，WANG Yang，CHEN Zuqing，et al. Anisotropic dynamic-static elastic parameter correlations for Jurassic lacustrine shales[J]. Chinese Journal of Geophysics，2025，68(1)：213–228.(in Chinese))
[11] 蒋剑青，罗敏华，胡诗红，等. 断续节理产状对砂岩破坏特征影响的真三轴试验研究[J]. 岩土力学，2025，46(10)：3 077–3 092. (JIANG jianqing，LUO Minhua，HU Shihong，et al. True triaxial test study on the influence of intermittent joint occurrence on sandstone failure characteristics[J]. Rock and Soil Mechanics，2025，46(10)：3 077–3 092.(in Chinese))
[12] ZHENG Z，SU G S，JIANG Q，et al. Mechanical behavior and failure mechanisms of cylindrical and prismatic rock specimens under various confining stresses[J]. International Journal of Damage Mechanics，2022，31(6)：864–881.
[13] SU G S，CHEN Z Y，JU J W，et al. Experimental study of the dynamically induced rockburst of a rock wall with double free faces[J]. International Journal of Damage Mechanics，2019，28(4)：611–637.
[14] 何满潮，李杰宇，任富强，等. 不同层理倾角砂岩单向双面卸荷岩爆弹射速度实验研究[J]. 岩石力学与工程学报，2021，40(3)：433–447.(HE Manchao，LI Jieyu，REN Fuqiang，et al. Experimental investigation on rockburst ejection velocity of unidirectional double-face unloading of sandstone with different bedding angles[J]. Chinese Journal of Rock Mechanics and Engineering，2021，40(3)：433–447.(in Chinese))
[15] 戚敏杰，赵光明，刘崇岩，等. 卸荷与补偿路径下深部岩体力学特性与变形破坏特征[J]. 煤炭学报，2025，50(3)：1 541–1 554.(QI Minjie，ZHAO Guangming，LIU Chongyan，et al. Mechanical properties and deformation damage characteristics of deep rock under unloading and compensation paths[J]. Journal of China Coal Society，2025，50(3)：1 541–1 554.(in Chinese))
[16] ZHENG Z，FENG X T，YANG C X，et al. Post-peak deformation and failure behaviour of Jinping marble under true triaxial stresses[J]. Engineering Geology，2020，265：105444.
[17] 贾喜荣，刘跃东，刘 畅，等. 基于岩石单轴抗压强度和抗拉强度的非线性Coulomb强度准则[J]. 岩石力学与工程学报，2025，44(增1)：1–9.(JIA Xirong，LIU Yuedong，LIU Chang，et al. Nonlinear Coulomb strength criterion based on uniaxial compressive and tensile strength of rocks[J]. Chinese Journal of Rock Mechanics and Engineering，2025，44(Supp.1)：1–9.(in Chinese))
[18] 丁 祥，张广清. 等向强化–软化Drucker-Prager材料强度参数演化[J]. 岩石力学与工程学报，2017，36(4)：910–916.(DING Xiang，ZHANG Guangqing. Variation of strength parameters of Drucker-Prager material with isotropic hardening and softening[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(4)：910–916.(in Chinese))
[19] 蒋邦友，谭云亮，王连国，等. 基于Mogi-Coulomb准则的弹塑性损伤本构模型及其数值实现[J]. 中国矿业大学学报，2019，48(4)：784–792.(JIANG Bangyou，TAN Yunliang，WANG Lianguo，et al. Development and numerical implementation of elastoplastic damage constitutive model for rock based on Mogi-Coulomb criterion[J]. Journal of China University of Mining and Technology，2019，48(4)：784–792.(in Chinese))
[20] WANG S S，XU W Y，JIA C J，et al. Mechanical behavior of fine-grained sandstone in triaxial compression and elastoplastic modeling by return mapping algorithms[J]. Bulletin of Engineering Geology and the Environment，2018，77(4)：1 689–1 699.
[21] BIKONG C，HOXHA D，SHAO J F. A micro-macro model for time-dependent behavior of clayey rocks due to anisotropic propagation of microcracks[J]. International Journal of Plasticity，2015，69：73–88.
[22] 周 辉，李 震，朱国金，等. 基于岩石统一能量屈服准则的硬岩损伤模型[J]. 岩土力学，2016，37(3)：609–615.(ZHOU Hui，LI Zhen，ZHU Guojin，et al. A damage model for hard rock based on unified energy yield criterion of rock[J]. Rock and Soil Mechanics，2016，37(3)：609–615.(in Chinese))
[23] HAJIABDOLMAJID V，KAISER P K，MARTIN C D. Modelling brittle failure of rock[J]. International Journal of Rock Mechanics and Mining Sciences，2002，39(6)：731–741.
[24] 肖洪天，周维垣. 脆性岩石变形与破坏的细观力学模型研究[J]. 岩石力学与工程学报，2001，22(2)：151–155.(XIAO Hongtian，ZHOU Weiyuan. A mesoscopic model of deformation and failure for brittle rocks[J]. Chinese Journal of Rock Mechanics and Engineering，2001，22(2)：151–155.(in Chinese))
[25] 张 超，曹文贵，王江营. 考虑损伤阈值影响的岩石脆-延性转化统计损伤本构模型研究[J]. 水文地质工程地质，2013，40(5)：45–50.(ZHANG Chao，CAO Wengui，WANG Jiangying. A study of the statistical damage constitutive model for the brittle-ductile transition of rock with consideration of damage threshold[J]. Hydrogeology and Engineering Geology，2013，40(5)：45–50.(in Chinese))
[26] 张 超，俞 缙，白 允，等. 基于强度理论的岩石脆延转化统计损伤本构模型[J]. 岩石力学与工程学报，2023，42(2)：307–316.(ZHANG Chao，YU Jin，BAI Yun，et al. Statistical damage constitutive model of rock brittle-ductile transition based on strength theory[J]. Chinese Journal of Rock Mechanics and Engineering，2023，42(2)：307–316.(in Chinese))
[27] LEMAITRE J. How to use damage mechanics[J]. Nuclear Engineering and Design，1984，80(2)：233–245.
[28] WANG S S，XU W Y，WANG W，et al. Experimental and numerical investigations on the mechanical behavior of fine-grained sandstone[J]. International Journal of Geomechanics，2018，18(2)：04017150.
[29] 冯 嵩，郑颖人，高 红. 岩土常规三轴Drucker-Prager准则[J]. 岩土力学，2024，45(10)：2 919–2 928.(FENG Song，ZHENG Yingren，GAO Hong. A new Drucker-Prager criterion for geomaterials under conventional triaxial stress condition [J]. Rock and Soil Mechanics，2024，45(10)：2 919–2 928.(in Chinese))
[30] RINALDI A，KRAJCINOVIC D，MASTILOVIC S. Statistical damage mechanics and extreme value theory[J]. International Journal of Damage Mechanics，2007，16(1)：57–76.
[31] XU H，PREVOST J H. Integration of a continuum damage model for shale with the cutting plane algorithm[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2017，41(4)：471–487. |
|
|
|
2026, Vol. 45 
