CHARACTERISTICS AND FORMATION MECHANISM OF CORE DISCING IN DEEP ROCK MASS
LI Zhanhai1，LI Shaojun2，FENG Xiating1，2，ZHOU Hui2，CHEN Bingrui2，ZHANG Chuanqing2
(1. School of Resources and Civil Engineering，Northeastern University，Shenyang，Liaoning 110004，China；
2. State Key Laboratory of Geomechanics and Geotechnical Engineering，Institute of Rock and Soil Mechanics，Chinese Academy of Sciences，Wuhan，Hubei 430071，China)
Abstract：According to borehole cores with the length more than 1 500 m in deep tunnels at Jinping II hydropower station，the information of the macro-damaged characteristics，quantity and thickness distribution of discing core were collected and the spatial distribution of core discing was analyzed. Then，the influences of different buried depths，geologic structure，tunnel geometric size，drilling diameter and directions on core discing were studied in combination with the results of elastic wave test and digital borehole images. Simultaneously，by applying scanning electron microscope technique for discs? surface，the micro-damage mechanism was discussed. The results indicated that：(1) The relationship between the quantity and thickness distribution was similar to a power function form. The quantity of core discing increased with depth and tunnel dimension. Within the zone of 3 times of tunnel diameter，core discing occurred more frequently. (2) The convex-concave formation was related to stress distribution，internal damage and mineral structure types. (3) Core discing often occurred under the joint action of geological and external effects. The native micro defects，structural plane and external disturbance were the discing foundation；the local stress concentration and stress release were the power of discing；the continuous drilling was the intrinsic cause of core broken into pies；the radial cut-compressive，axial tensile stress and lateral expansion of rock cores were the mechanical response of rock mass fracture. (4) Discing zone characteristics were the comprehensive reflection of rock damage weakening，rock mass structure and local stress concentration.
李占海1，李邵军2，冯夏庭1，2，周 辉2，陈炳瑞2，张传庆2. 深部岩体岩芯饼化特征分析与形成机制研究[J]. 岩石力学与工程学报, 2011, 30(11): 2254-2266.
LI Zhanhai1，LI Shaojun2，FENG Xiating1，2，ZHOU Hui2，CHEN Bingrui2，ZHANG Chuanqing2. CHARACTERISTICS AND FORMATION MECHANISM OF CORE DISCING IN DEEP ROCK MASS. , 2011, 30(11): 2254-2266.
KAGA N，MATSUKI K，SAKAGUCHI K. The in-situ stress states associated with core discing estimated by analysis of principal tensile stress[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(5)：653-665.
[3]
MATSUKI K，KAGA N，YOKOYAMA T，et al. Determination of three dimensional in situ stress from core discing based on analysis of principal tensile stress[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(7)：1 167-1 190.
<body>Your browse does not support frame!</body>
2011, Vol. 30 
