(1. Institute Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources，Yangtze River Scientific Research Institute，Wuhan，Hubei 430010，China；2. Zhaoyang Testing Instruments Co.，Ltd.，Changchun，Jilin 152500，China)
Abstract：An in situ rock masses triaxial test system YXSW–12 was manufactured by the Yangtze River Scientific Research Institute and Chaoyang Test Instruments Co.，Ltd.. The test system had the following advantages：(1) The real triaxial test could be carried out. (2) The surrounding pressure could achieve 15 MPa；and the axial pressure could achieve 80 MPa. (3) The sample size was 50 cm×50 cm×100 cm，which could express the mechanical characteristic of large scale rock. (4) The complex stress routes could be servo-controlled. (5) The whole curve of deforming and breaking processes could be got，and the deformation and strength parameters in one single test could be obtained. The YXSW–12 test system was used to test the mechanical properties of column jointed rock masses，and got excellent results. The test results were shown as follows：(1) The anisotropic deformation parameters under different loading conditions were obtained. (2) The peak strength and yield strength of original simples were obtained by unloading test. The residual strengths of disturbed samples were obtained by loading and unloading test. The differences of strength parameters with different kinds were compared and analyzed. (3) The break mechanism of field rock masses was researched. The test results indicated that the breaking surface was mainly originated from the column joints. The YXSW-12 test system provides a new means for engineers to find out the deformation，strength and breaking properties of deep and complicated rock masses.
张宜虎1，周火明1，钟作武1，熊诗湖1，郝庆泽2. YXSW–12现场岩体真三轴试验系统及其应用[J]. 岩石力学与工程学报, 2011, 30(11): 2312-2320.
ZHANG Yihu1，ZHOU Huoming1，ZHONG Zuowu1，XIONG Shihu1，HAO Qingze2. IN SITU ROCK MASSES TRIAXIAL TEST SYSTEM YXSW–12 AND ITS APPLICATION. , 2011, 30(11): 2312-2320.
俞茂宏，YOSHIMINE M，强洪夫，等. 强度理论的发展和展望[J]. 工程力学，2004，21(6)：1-20.(YU Maohong, YOSHIMINE M，QIANG Hongfu，et al. Development and expectation of strength theory[J]. Engineering Mechanics，2004，21(6)：1-20.(in Chinese))
[5]
熊诗湖，邬爱清，周火明. 层状软岩力学特性现场试验研究[J]. 地下空间与工程学报，2006，2(6)：887-890.(XIONG Shihu，WU Aiqing，ZHOU Huoming. In-situ test on mechanical characteristics of soft layer rock mass[J]. Chinese Journal of Underground Space and Engineering，2006，2(6)：887-890.(in Chinese))
<body>Your browse does not support frame!</body>
2011, Vol. 30 
