广义Hoek-Brown准则中强度折减系数的确定

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (329 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要稳定性系数是边坡安全性评价的关键指标，但对适用于岩体特性的Hoek-Brown准则的折减存在标准不统一或计算复杂的特点，有必要确定合适的强度折减方案和系数。将广义Hoek-Brown准则(2002)与强度折减原理相结合，以三峡库区狮子包高边坡为模型，通过改变坡高、坡角和参数，以7种对岩石单轴抗压强度?ci、地质强度指标GSI和岩石材料常数mi的简化折减方案，研究狮子包高边坡的稳定性，并对稳定性系数和抗剪强度进行误差分析，确定广义Hoek-Brown准则的最优强度折减方案。研究结果表明，对广义Hoek-Brown准则的强度折减可通过同比折减参数?ci和GSI获得，此时数值计算与极限平衡法(Morgenstern-Price)确定的高边坡稳定性系数相对误差平均值为6.9%，方差为6.9%，抗剪强度相对误差为4.98%。这对广义Hoek-Brown准则在岩质边坡稳定性数值计算中的广泛应用有一定理论意义和价值。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：边坡工程, 岩质边坡稳定性, 强度折减, 广义Hoek-Brown准则, 误差分析

Abstract：Factor of safety is a key indicator and the shear strength reduction method is currently very popular for evaluating rock slope stability. But for reduction technique of the nonlinear generalized Hoek-Brown criterion (2002)，the standard is not unified or with complex calculation. Taking Shizibao high rock slope in the Three Gorges area for example，8 models were established by changing the height，angle and parameters of the slope. And the stability was evaluated by seven reduction technique schemes，which were the combination by reduction of the three parameters，i. e. uniaxial compressive strength of intact rock ?ci，geological strength index GSI，and material constant of intact rock mi. Then the relative errors of the seven schemes were analyzed；and the shear strength reduction factor was obtained for the generalized Hoek-Brown criterion. The result shows that the factor of safety can be obtained by reduction of the two parameters ?ci and GSI in the same rate for the generalized Hoek-Brown criterion. The factor of safety by shear strength reduction method is similar to that by the limit equilibrium method，Morgenstern-Price. And the average relative error of factor of safety is 6.9%；the variance is 6.9%；and the shear strength relative error is 4.98%. The result has some theoretical value for the wide application of the generalized Hoek-Brown criterion to the rock slope stability evaluation.

Key words： slope engineering rock slope stability shear strength reduction generalized Hoek-Brown criterion error analysis

收稿日期: 2011-05-16

引用本文:

宋琨1，晏鄂川1，2，毛伟1，张婷婷1. 广义Hoek-Brown准则中强度折减系数的确定[J]. 岩石力学与工程学报, 2012, 31(1): 106-112.
SONG Kun1，YAN Echuan1，2，MAO Wei1，ZHANG Tingting1. DETERMINATION OF SHEAR STRENGTH REDUCTION FACTOR FOR GENERALIZED HOEK-BROWN CRITERION. , 2012, 31(1): 106-112.

链接本文:

http://www.rockmech.org/CN/Y2012/V31/I1/106

[11]	宗全兵，徐卫亚. 基于广义Hoek-Brown强度准则的岩质边坡开挖稳定性分析[J]. 岩土力学，2008，29(11)：3 071-3 076.(ZONG Quanbing，XU Weiya. Stability analysis of excavating rock slope using generalized Hoek-Brown failure criterion[J]. Rock and Soil Mechanics，2008，29(11)：3 071-3 076.(in Chinese)) " target="_blank">
[12]	HAMMAH R E，YACOUB T E，CORKUM B C，et al. The shear strength reduction method for the generalized Hoek-Brown criterion[C]// Proceedings of Alaska Rocks 2005. Anchorage，Alaska：[s.n.]，2005. " target="_blank">
[13]	GUROCAK Z，ALEMDAG S，ZAMAN M M. Rock slope stability and excavatability assessment of rocks at the Kapikaya dam site，Turkey[J]. Engineering Geology，2008，96(1/2)：17-27. " target="_blank">
[14]	HOEK E，CARRANZA-TORRES C，CORKUM B. Hoek-Brown failure criterion[C]// Proceedings of NARMS-TAC Conference. Toronto：[s.n.]，2002：267-273. " target="_blank">
[1]	ZIENKIEWICZ O C，HUMPHESON C，LEWIS R W. Associated and non-associated visco-plasticity and plasticity in soil mechanics[J]. Geotechnique，1975，25(4)：671-689. " target="_blank">
[5]	邓华锋，李建林，王乐华，等. 基于强度折减法的库岸滑坡三维有限元分析[J]. 岩土力学，2010，31(5)：1 604-1 608.(DENG Huafeng，LI Jianlin，WANG Lehua，et al. 3D finite element analysis of reservoir bank landslide based on strength reduction method[J]. Rock and Soil Mechanics，2010，31(5)：1 604-1 608.(in Chinese)) " target="_blank">
[7]	吴顺川，金爱兵，高永涛. 基于广义Hoek-Brown准则的边坡稳定性强度折减法数值分析[J]. 岩土工程学报，2006，28(11)：1 975-1 980. (WU Shunchuan，JIN Aibing，GAO Yongtao. Numerical simulation analysis of strength reduction for slope of jointed rock masses based on generalized Hoek-Brown criterion[J]. Chinese Journal of Geotechnical Engineering，2006，28(11)：1 975-1 980.(in Chinese)) " target="_blank">
[8]	牟声远，王正中. Hoek-Brown准则在岩质边坡稳定分析中的优越性[J]. 煤田地质与勘探，2009，37(3)：53-56.(MU Shengyuan，WANG Zhengzhong. Hoek-Brown criterion superiority for rocky slope stability analysis[J]. Coal Geology and Exploration，2009，37(3)：53-56.(in Chinese)) " target="_blank">
[10]	林杭，曹平，李江腾，等. 基于广义Hoek-Brown准则的边坡安全系数间接解法[J]. 煤炭学报，2008，33(10)：1 147-1 151.(LIN Hang，CAO Ping，LI Jiangteng，et al. The indirect calculation method for the safety factor of slope based on generalized Hoek-Brown criterion[J]. Journal of China Coal Society，2008，33(10)：1 147-1 151.(in Chinese)) " target="_blank">
[6]	GRIFFITHS D V，LANE P A. Slope stability analysis by finite elements[J]. Geotechnique，1999，49(3)：387-403. " target="_blank">
[9]	林杭，曹平，赵延林，等. 强度折减法在Hoek-Brown准则中的应用[J]. 中南大学学报：自然科学版，2007，38(6)：1 219-1 224. (LIN Hang，CAO Ping，ZHAO Yanlin，et al. Application of strength reduction method to Hoek-Brown criterion[J]. Journal of Central South University：Science and Technology，2007，38(6)：1 219-1 224.(in Chinese)) " target="_blank">
[15]	HOEK E，BROWN E T. Practical estimates of rock mass strength[J]. International Journal of Rock Mechanics and Mining Sciences，1997，34(8)：1 165-1 186. " target="_blank">
[3]	宋二祥. 土工结构安全系数的有限元计算[J]. 岩土工程学报，1997，19(2)：1-7.(SONG Erxiang. Finite element analysis of safety factor for soil structures[J]. Chinese Journal of Geotechnical Engineering，1997，19(2)：1-7.(in Chinese)) " target="_blank">
[2]	DAWSON E M，ROTH W H，DRESCHER A. Slope stability analysis by strength reduction[J]. Geotechnique，1999，49(6)：835-840. " target="_blank">
[4]	赵尚毅，郑颖人，时卫民，等. 用有限元强度折减法求边坡稳定安全系数[J]. 岩土工程学报，2002，24(3)：343-346.(ZHAO Shangyi，ZHENG Yingren，SHI Weimin，et al. Analysis of safety factor of slope by strength reduction FEM[J]. Chinese Journal of Geotechnical Engineering，2002，24(3)：343-346.(in Chinese))
[16]	万少石，年廷凯，蒋景彩，等. 边坡稳定强度折减有限元分析中的若干问题讨论[J]. 岩土力学，2010，31(7)：2 283-2 288.(WAN Shaoshi，NIAN Tingkai，JIANG Jingcai，et al. Discussion on several issues in slope stability analysis based on shear strength reduction finite element methods(SSR-FEM)[J]. Rock and Soil Mechanics，2010，31(7)：2 283-2 288.(in Chinese)) " target="_blank">