MECHANISM OF SUPPORT CRUSHING WHILE MINING OUT OF UPPER GOAF-SIDE COAL PILLAR IN CLOSE DISTANCE SEAMS OF SHENDONG MINING AREA
JU Jinfeng1,XU Jialin2,3,ZHU Weibing2,3,WANG Lujun2,3
(1. Internet of Things/Perception Mine Research Center,China University of Mining and Technology,Xuzhou,Jiangsu 221008,China;2. School of Mines,China University of Mining and Technology,Xuzhou,Jiangsu 221116,China;3. State Key Laboratory of Coal Resources and Safe Mining,China University of Mining and Technology,Xuzhou,Jiangsu 221116,China)
Abstract:Aiming at the support crushing accidents during the faces mining out of the upper 1-2 goaf-side coal pillar in panel of coal seam 1-2 of Shigetai coal mine,the mechanism and its prevention measures are researched based on the field measurement,simulation experiments and theoretical analysis. The results show that when the cut-hole of the lower seam was set under the upper coal pillar,the working face would go through the mining stage from the area under the coal pillar to that under the goaf,which was called the mining out of the upper goaf-side coal pillar. In the mining process,two situations exist in the support crushing by the influence of the cut-hole position. If the distance between the cut-hole and the upper coal pillar boundary is larger than the first breaking step of the key stratum(KS) above the pillar,the periodic breaking block of the KS and its broken block at the side of goaf near the pillar boundary will form an unstable three hinged structure when mining out of the pillar;and the excessive load caused by the relative rotary motion of the structure is the fundamental source for the support crushing. If the distance is between the first breaking and periodic breaking step of the KS,the KS will present the cantilevered breaking state when mining out of the pillar;and the support crushing is caused by the excessive load due to its long breaking span. Meanwhile,when the KS breaking span is more than 1.7–1.9 times the length of its periodic broken step,the risk level of the support crushing will be obviously higher than that in the former situation. The simulation experiments and engineering practices show that the support crushing accident during the mining out of the upper goaf-side coal pillar can be effectively controlled by reducing the distance between the cut-hole and coal pillar boundary,so as to prevent the breaking of the KS above the pillar.
鞠金峰1,许家林2,3,朱卫兵2,3,王路军2,3. 神东矿区近距离煤层出一侧采空煤柱压架机制[J]. 岩石力学与工程学报, 2013, 32(7): 1321-1330.
JU Jinfeng1,XU Jialin2,3,ZHU Weibing2,3,WANG Lujun2,3. MECHANISM OF SUPPORT CRUSHING WHILE MINING OUT OF UPPER GOAF-SIDE COAL PILLAR IN CLOSE DISTANCE SEAMS OF SHENDONG MINING AREA. , 2013, 32(7): 1321-1330.
许家林,鞠金峰. 特大采高综采面关键层结构形态及其对矿压显现的影响[J]. 岩石力学与工程学报,2011,30(8):1 547-1 556.(XU Jialin,JU Jinfeng. Key strata structural morphology and its influence on strata behavior in fully-mechanized face with super great mining height[J]. Chinese Journal of Rock Mechanics and Engineering,2011,30(8):1 547-1 556.(in Chinese))
Your browse does not support frame!