基于岩体质量指标BQ的岩质边坡工程岩体分级方法

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (538 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要对于线路工程上具有普遍性的岩质边坡，因数量多，范围广，工程勘察深度相对较浅。依据规范的测试和试验，建立一种基础性岩体质量评价方法，实现边坡工程岩体分级，并根据行业要求与经验提出支护措施，对提高岩质边坡工程设计与施工的科学性无疑具有重要的意义。针对现有的《工程岩体分级标准》(GB50218—94)没有涉及边坡工程岩体分级，在深入研究和系统消化边坡工程岩体分级成果基础上，提出基于岩体质量指标BQ的岩质边坡工程岩体分级方法(简称BQ-RSlope方法)。该方法在岩体基本质量指标基础上，考虑控制边坡稳定性的主要结构面类型与延伸性、结构面产状与坡面间关系以及边坡内地下水发育程度等影响因素，对岩体基本质量指标进行修正，由此确定边坡工程岩体级别，并给出各级别边坡工程岩体自稳能力的评价。结合4个边坡工程10个坡段的应用性验证，表明依据文中方法获得的各边坡坡段的岩体质量分级以及该基于质量指标对边坡稳定性的评价结果与工程实际总体相符，提出的依据BQ的岩质边坡工程岩体分级方法是合适的。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：岩石力学, 岩体基本质量, 岩体质量指标BQ, 工程岩体分级, 边坡工程岩体分级, 边坡岩体自稳能力

Abstract：The engineering classification in rock slopes is not included in the current standard of engineering classification of rock masses(GB50218—94). This paper presents the engineering classification method for rock slopes(BQ-R Slope) based on the quality index of rock mass BQ. In this method，several modified factors are employed as to correct rock mass basic quality，and the engineering rock mass classifications for rock slopes are determined by the modified rock mass quality，and the evaluation for stand-up time of rock slope in correspondence with each class of rock mass is further proposed. The employed factors consist of the type and the persistence of major structural planes，the relationship between orientations of structural planes in rock mass and rock slope surface and the groundwater conditions in rock slope. The presented method is verified through applications to four rock slope projects and ten slope sections in total. It is found that the engineering classification and the corresponding evaluation results of each slope section with the method proposed are generally in good agreement with the practical situation. This indicates that the presented method for engineering rock mass classification of rock slopes based on BQ index is appropriate.

Key words： rock mechanics rock mass basic quality rock mass quality index BQ engineering rock mass classification engineering rock mass classification for rock slope stand-up time of rock slope

收稿日期: 2013-12-03

引用本文:

邬爱清，汪斌. 基于岩体质量指标BQ的岩质边坡工程岩体分级方法[J]. 岩石力学与工程学报, 2014, 33(4): 699-706.
WU Aiqing，WANG Bin. ENGINEERING ROCK MASS CLASSIFICATION METHOD BASED ON ROCK MASS QUALITY INDEX BQ FOR ROCK SLOPE. , 2014, 33(4): 699-706.

链接本文:

http://www.rockmech.org/CN/Y2014/V33/I4/699

[2]	DEERE D C，HENDRON A J，PATTON F D，et al. Design of surface and near surface construction in rock[C]// Proceedings of the 8th U.S，Symp. Rock Mech.. New York：[s.n.]，1967：237-302. " target="_blank">
[4]	BIENIAWSKI Z T. Engineering classification of jointed rock masses[J]. Trans. S. Afr. Inst. Civ. Eng.，1973，15(12)：335-344. " target="_blank">
[6]	王石春，侯发亮，李苍松. 隧道工程岩体分级[M]. 成都：西南交通大学出版社，2007：100-115.(WANG Shichun，HOU Faliang，LI Cangsong. Rock mass classification in tunneling engineering[M]. Chengdu：Southwest Jiaotong University Press，2007：100-115.(in Chinese)) " target="_blank">
[8]	ROMANA M R. A geomechanical classification for slopes：slope mass rating[J]. Comprehensive Rock Engineering，1993，(3)：575-599. " target="_blank">
[10]	中华人民共和国行业标准编写组. DL/T5337—2006 水电水利工程边坡工程技术地质勘查技术规程[S]. 北京：中国电力出版社，2006.(The Professional Standards Compilation Group of People?s Republic of China. DL/T5337—2006 Technical code for engineering geological investigation of slope for hydropower and water resources project[S]. Beijing：China Electric Power Press，2006.(in Chinese)) " target="_blank">
[1]	BIENIAWSKI Z T. Engineering rock mass classifications，a complete manual for engineers and geologists in mining，civil and petroleum engineering[M]. New York：A Wiley-Interscience Publication，1989：30-31. " target="_blank">
[5]	中华人民共和国国家标准编写组. GB 50487—2008 水利水电工程地质勘察规范[S]. 北京：中国计划出版社，2009：123-128.(The National Standards Compilation Group of People?s Republic of China. GB50487—2008 Code for engineering geological investigation of water resources and hydropower[S]. Beijing：China Planning Press，2009：123-128.(in Chinese)) " target="_blank">
[7]	ROMANA M R. New adjustment ratings for application of Biemiawski classification to slopes[C]// Proc. Int. Symp. Rock Mech. Excav. Min. Civ. Works. Mexico：[s.n.]，1985：59-68. " target="_blank">
[9]	孙东亚，陈祖煜，杜伯辉，等. 边坡稳定评价方法RMR-SMR体系及其修正[J]. 岩石力学与工程学报，1997，16(4)：297-304.(SUN Dongya，CHEN Zuyu，DU Bohui，et al. Modifications to the RMR-SRM system for slope stability evaluation[J]. Chinese Journal of Rock Mechanics and Engineering，1997，16(4)：297-304.(in Chinese))
[11]	黄昌乾，范建军. 边坡岩体质量分类的SMR法及其应用实例[J].岩土工程技术，1998，(1)：7-15.(HUANG Changqian，FAN Jianjun. The SRM method and case history of slope rock mass quality classification[J]. Geotechnical Engineering Technique，1998，(1)：7-15.(in Chinese)) " target="_blank">
[13]	石豫川，王哲，万国荣，等. 山区高等级公路边坡岩体分级研究[J]. 岩石力学与工程学报，2005，24(6)：939-944.(SHI Yuchuan，WANG Zhe，WAN Guorong，et al. Study of mountain highway slope mass rating[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(6)：939-944.(in Chinese))
[3]	BARTON N R，LIEN R，LUNDE J. Engineering classification of rock masses for the design of tunnel support[J]. Rock Mechanics，1974，6(4)：189-239. " target="_blank">
[12]	万国荣，石豫川，王哲，等. SMR法在公路边坡稳定性分析中的应用[J]. 公路交通技术，2004，(2)：7-10.(WAN Guorong，SHI Yuchuan，WANG Zhe，et al. Application of SMR method to highway slope stability classification[J]. Technology of Highway and Transport，2004，(2)：7-10.(in Chinese)) " target="_blank">
[14]	中华人民共和国国家标准编写组. GB50330—2002 建筑边坡工程技术规范[S]. 北京：中国建筑工业出版社，2002.(The National Standards Compilation Group of People?s Republic of China. GB50330—2002 Technical code for building slope engineering[S]. Beijing：China Architecture and Building Press，2002.(in Chinese)) " target="_blank">
[15]	董学晟. 《工程岩体分级标准》的研究[J]. 长江科学院院报，1992，9(4)：1-9.(DONG Xuesheng. Study of the Standard for Engineering Classification of Rock Masses[J]. Journal of Yangtze River Scientific Research Institute，1992，9(4)：1-9.(in Chinese))
[16]	中华人民共和国国家标准编写组. GB50218-94工程岩体分级标准[S]. 北京：中国计划出版社，1995.(The National Standards Compilation Group of People?s Republic of China. GB50218—94 Standard for engineering classification of rock masses[S]. Beijing：China Planning Press，1995.(in Chinese)) " target="_blank">
[17]	邬爱清，柳赋铮. 国标《工程岩体分级标准》的应用与进展[J]. 岩石力学与工程学报，2012，31(8)：1 513-1 523.(WU Aiqing，LIU Fuzheng. Advancement and application of the standard of engineering classification of rock masses[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(8)：1 513-1 523.(in Chinese)) " target="_blank">
[18]	中华人民共和国国家标准编写组. GB50218 工程岩体分级标准(报批稿)[S]. 武汉：长江科学院，2013.(The National Standards Compilation Group of People?s Republic of China. GB50218 Standard for engineering classification of rock masses(modified version for authorized approval)[S]. Wuhan：Yangtze River Scientific Research Institute，2013.(in Chinese)) " target="_blank">