(Heilongjiang Ground Pressure and Gas Control in Deep Mining Key Laboratory,Heilongjiang University of Science and Technology,Harbin,Heilongjiang 150022,China)
Abstract:Uniaxial cyclic loading and unloading experiments for coal samples were performed using electro- hydraulic servo testing machine in order to obtain the relationship between the hysteresis loop and elastoplastic strain energy under cyclic loading and unloading for identifying the burst tendency of coal. The stress-strain curves,the curves of loading cycles against the loop area of hysteresis and the relationship between the elastic strain energy and the loop area of hysteresis were analyzed. The loop area of hysteresis and the elastic strain energy were found to be positively correlated with the circle numbers. The hysteresis loop occurred in the compression phase of the cyclic loading and unloading. When the coal sample was approaching the failure,the irreversible plastic deformation achieved the maximum value. The plastic energy of each cycle was found to be the dissipated energy of the newly generated cracks. The dissipated energy(hysteresis loop area) was not subtracted in calculating the elastic energy index in the previous methods,which led to smaller values. The index formula was thus modified for better predicting the burst tendency of coal.
许 江,尹光志,王 鸿,等. 不同应力水平时砂岩滞回曲线演化的实验研究[J]. 重庆建筑大学学报,2006,28(2):40-42.(XU Jiang,YIN Guangzhi,WANG Hong,et al. Experimental research on evolution of hysteresis curve of rock in different axial stress levels[J]. Journal of Chongqing Jianzhu University,2006,28(2):40-42.(in Chinese))
Your browse does not support frame!