SHEARING STRENGTH AND ELASTO-PLASTIC FEM ANALYSES FOR DUAL POROSITY MEDIA
ZHANG Yujun1,ZHANG Weiqing2
(1. State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences,Wuhan,Hubei 430071,China;2. China Railway Tunnel Survey and Design Institute Co.,Ltd.,Tianjin 300133,China)
Abstract:Considering the connectivity rate and spacing of fractures,volume fractions of pore matrix and fracture material in a representative element volume,a method of determining the cohesion and internal friction angle which vary with direction in a dual porosity medium was suggested,and the equations established for calculating the values of and were proved to be reasonable. Introducing the method solving and values into the elasto-plastic finite element method(FEM) code,the computations were carried out for a change obviously,the plastic zones accelerate development,and the distributions of displacements,stresses and plastic zones change from symmetric ones to asymmetric ones,as well as the anisotropy of surrounding rock mass displays more significantly;but with the increase of fracture spacing,the dynamic state of surrounding is just the reverse of what in the case of increasing fracture connectivity rate.
[3]杨天鸿,唐春安,梁正召,等. 脆性岩石破裂过程损伤与渗流耦合数值模型研究[J]. 力学学报,2003,35(5):533-541.(YANG Tianhong,TANG Chun?an,LIANG Zhengzhao,et al. Study on model of damage and flow coupling in brittle rock failure process[J]. Acta Mechanica Sinica,2003,35(5):533-541.(in Chinese))
Your browse does not support frame!