盐膏岩DRA-Kaiser地应力测试方法初探

doi:10.13722/j.cnki.jrme.2014.0132

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (301 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要目前的地应力测量方法均不适合盐膏岩地应力测量，而现场需要盐膏层的地应力数据进行钻井设计，保证盐膏层钻井安全。为了解决该难题，首次采用DRA-Kaiser效应法测量盐膏岩地应力。结果表明，用DRA-Kaiser法相结合的方法，可以测量盐膏岩的地应力并提高试验结果的可靠性；当应力–应变差曲线上有拐点，且应力–声发射强度曲线上有明显增大的点，这时对应的轴压即为岩石所受的应力，避免了先前只用Kaiser效应法进行试验时出现多个Kaiser点的问题。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：岩石力学, 盐膏岩, DRA-Kaiser法, Kaiser效应, 地应力测试

Abstract：Currently，existing geostress measurement methods are not suitable for salt-gypsum formation，while it needs geostress data to do drilling design for ensuring drilling safety in salt-gypsum formation. To alleviate this problem，geostress of rock salt-gypsum for the first time by DRA-Kaiser method is measured. It indicates that combining DRA and Kaiser method could increase the credibility of test data. When the stress-strain difference curve displays inflection point，and stress-acoustic emission intensity curve has significantly increased point，the stress which corresponds to axial compression is the stress that rock suffered. It avoids displaying several Kaiser points in previous Kaiser effect experiments.

Key words： rock mechanics rock salt-gypsum DRA-Kaiser method Kaiser effect geostress measurement

引用本文:

葛伟凤1，张飞2，陈勉3，金衍3，卢运虎3，侯冰3. 盐膏岩DRA-Kaiser地应力测试方法初探[J]. 岩石力学与工程学报, 2015, 34(s1): 3138-3142.
GE Weifeng1，ZHANG Fei2，CHEN Mian3，JIN Yan3， LU Yunhu3，HOU Bing3. RESEARCH ON GEOTRESS MEASUREMENT USING DRA-KAISER METHOD IN SALT-GYPSUM FORMATION. , 2015, 34(s1): 3138-3142.

链接本文:

http://www.rockmech.org/CN/10.13722/j.cnki.jrme.2014.0132 或 http://www.rockmech.org/CN/Y2015/V34/Is1/3138

[1]	SETO M，NAG D K，VUTUKUR V S. In-situ rock stress measurement from rock cores using the acoustic emission method and deformation rate analysis[J]. Geotechnical and Geological Engineering，1999，17：241-266. " target="_blank">
[4]	葛伟凤，陈勉，金衍，等. 水平井造斜段盐膏岩蠕变套管外挤压力分析[J]. 钻采工艺，2013，36(2)：87-89.(GE Weifeng，CHEN Mian，JIN Yan，et al. Analysis of the equivalent stress on casings induced by salt-gypsum creep in build-up sections for horizontal wells[J]. Drilling and Production Technology，2013，36(2)：87-89. (in Chinese)) " target="_blank">
[2]	杨恒林，陈勉，金衍，等. 蠕变地层套管等效破坏载荷分析[J].中国石油大学学报：自然科学版，2006，30(4)：94-97.(YANG Henglin，CHEN Mian，JIN Yan，et al. Analysis of casing equivalent collapse resistance in creep formations[J]. Journal of China University of Petroleum：Natural Science，2006，30(4)：94-97.(in Chinese))
[9]	谢强，邱鹏，余贤斌. 利用声发射法和变形率变化法联合测定地应力[J]. 煤炭学报，2010，35(4)：559-564.(XIE Qiang，QIU Peng，YU Xianbin，et al. Initial-stress measurements with AE and DRA combined technique[J]. Journal of China Coal Society，2010，35(4)：559-564.(in Chinese))
[7]	FILIMONOV Y L，LAVROV A V，SHAFARENKO Y M，et al. Memory effects in rock salt under triaxial stress state and their use for stress measurement in a rock mass[J]. Rock Mechanics and Rock Engineering，2001，34(4)：275-291.
[5]	YAMAMOTO K，KUWAHARA Y，KATO N，et al. Deformation rate analysis：a new method for in situ stress examination from inelastic deformation of rock samples under uniaxial compressions[J]. Tohoku Geophysical Journal，1990，33：127-147. " target="_blank">
[3]	葛伟凤，陈勉，金衍，等. 超深井非均匀地应力场中射孔套管强度分析[J]. 石油天然气学报，2012，34(8)：123-126.(GE Weifeng，CHEN Mian，JIN Yan，et al. Analysis of perforated casing strength in non-uniform in-situ stress field in ultra-deep well[J]. Journal of Oil and Gas Technology，2012，34(8)：123-126.(in Chinese))
[6]	MATSUKI K，KOJIMA T. A mechanism of stress memory in core-based methods for measuring in-situ stresses[C]// Source 8th ISRM Congress. [S. l.]：[s. n.]，1995，SPE 8CONGRESS-1995-032. " target="_blank">
[8]	HUNT S P，MEYERSB A G，LOUCHNIKOVB V. Modeling the Kaiser Effect and deformation rate analysis in sandstone using the discrete element method[J]. Computers and Geotechnics，2003，30(7)：611-621.
[10]	葛伟凤，陈勉，金衍，等. 深部盐膏岩地层套管磨损后等效应力分析[J]. 中国石油大学学报：自然科学版，2013，37(1)：75-79.(GE Weifeng，CHEN Mian，JIN Yan，et al. Analysis of the equivalent stress on casings after casing wear in deep salt-gypsum formation[J]. Journal of China University of Petroleum：Natural Science，2013，37(1)：75-79.(in Chinese))