基于全应力–应变曲线及起裂应力的岩石脆性特征评价方法

doi:10.13722/j.cnki.jrme.2017.0499

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1642 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要脆性作为岩石重要的力学指标，准确评价岩石脆性特征对岩体工程稳定性具有重要意义。目前，常用的岩石脆性指数评价方法主要基于岩石压缩过程中峰后应力–应变曲线变化规律，而对岩石峰前应力状态关注较少。综合考量峰后应力跌落速率及起裂应力值至峰值应力值之间的应力增长速率，建立一种基于岩体应力–应变全过程的脆性指数计算方法，更加准确、合理地描述岩体脆性特征。试验结果表明：单轴条件下当全程采用轴向位移控制时，脆性较强的岩石难以准确获得其峰后曲线，容易降低基于峰后应力曲的常规脆性评价方法的准确性，而所建立的脆性指标可根据峰前曲线进行判断，能够准确评价岩石脆性程度。在三轴条件下，该脆性指标更为全面地反映了围压对大理岩脆性的抑制作用。建立的脆性指标基于岩石整个压缩过程的应力状态，能够更加显著地体现不同因素对岩石脆性特征的影响。试验结果很好地验证了该指标的准确性与优越性，研究结果对丰富与完善岩体脆性评价体系具有重要的作用。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	陈国庆
	赵聪
	魏涛
	王剑超

关键词 ：岩石力学, 脆性指数, 全应力&ndash, 应变曲线, 起裂应力

Abstract：Brittleness is an important index of rock and evaluating the brittleness accurately is of great significance in rock engineering. At present，the commonly used method to evaluate the brittleness index of rock is based on the variation of the stress strain curve in compression process，and less attention is paid to the pre-stress state. In this paper，the rate of stress drop in the post-peak state and the rate of stress increase from crack initiation to stress peak are comprehensively considered. A new method for calculating the brittleness index more accurately and reasonably based on the whole process of stress and strain of rock mass is established. It is difficult to obtain the post peak curve accurately for strong brittle rock in displacement controlled uniaxial loading tests，which affects the accuracy of the conventional method based on the post peak stress curve. The brittleness index established in this paper is according to the stress-strain curve before stress peak. Under the condition of triaxial compression，the brittle index proposed reflects the inhibitory effect of confining pressure on the brittleness of marble more comprehensively. The brittleness index established in this paper is based on the stress state of the whole compression process and reflects the effect of different factors on rock brittleness. The accuracy and superiority of this index are verified with the experimental results.

Key words： rock mechanics brittleness index complete stress-strain curve crack initiation stress

引用本文:

陈国庆，赵聪，魏涛，王剑超. 基于全应力–应变曲线及起裂应力的岩石脆性特征评价方法[J]. 岩石力学与工程学报, 2018, 37(1): 51-59.
CHEN Guoqing，ZHAO Cong，WEI Tao，WANG Jianchao. Evaluation method of brittle characteristics of rock based on full stress-strain curve and crack initiation stress. , 2018, 37(1): 51-59.

链接本文:

http://www.rockmech.org/CN/10.13722/j.cnki.jrme.2017.0499 或 http://www.rockmech.org/CN/Y2018/V37/I1/51

[2]	陈陆望，白世伟. 脆性岩体岩爆倾向性相似材料概化配比试验研究[J]. 岩土力学，2006，27(增)：1 054-1 058.(CHEN Luwang，BAI Shiwei. Proportioning test study on similar material generalization of rockburst tendency of brittle rock-mass[J]. Rock and Soil Mechanics，2006，27(Supp.)：1 054-1 058.(in Chinese))
[12]	RICKMAN R，MULLEN M，PETRE E，et al. A practical use of shale petrophysics for stimulation design optimization：all shale plays are not clones of Barnett shale[R]. SPE115258，2008.
[22]	PROTODYAKONOV M M. Mechanical properties and drillability of rocks[C]// Proceedings of the 5th Symposium on Rock Mechanics. Twin Cities，USA：University of Minnesota Press，1963：103-118.
[19]	HONDA H，SANADA Y. Hardness of coal[J]. Fuel，1956，35：451.
[1]	王元汉，李卧东，李启光，等. 岩爆预测的模糊数学综合评判方法[J]. 岩石力学与工程学报，1998，17(5)：493-501.(WANG Yuanhan，LI Wodong，LI Qiguang，et al. Method of fuzzy comprehensive evaluations for rockbrust predication[J]. Chinese Journal of Rock Mechanics and Engineering，1998，17(5)：493-501.(in Chinese))
[6]	李庆辉，陈勉，金衍，等. 页岩脆性的室内评价方法及改进[J]. 岩石力学与工程学报，2012，31(8)：1 680-1 685.(LI Qinghui，CHEN Mian，JIN Yan，et al. Indoor evaluation method for shale brittleness and improvement[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(8)：1 680-1 685.(in Chinese))
[9]	王宇，李晓，武艳芳，等. 脆性岩石起裂应力水平与脆性指标关系探讨[J]. 岩石力学与工程学报，2014，33(2)：264-275.(WANG Yu，LI Xiao，WU Yanfang，et al. Research on relationship between crack initiation stress level and brittleness indices for brittle rocks[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(2)：264-275.(in Chinese))
[11]	TARASOV B，POTVIN Y. Universal criteria for rock brittleness estimation under triaxial compression[J]. International Journal of Rock Mechanics and Mining Sciences，2013，59：57-69.
[13]	周辉，孟凡震，张传庆，等. 基于应力-应变曲线的岩石脆性特征定量评价方法[J]. 岩石力学与工程学报，2014，33(6)：1 114- 1 122.(ZHOU Hui，MENG Fanzhen，ZHANG Chuanqing，et al. Quantitative evaluation of rock brittleness based on stress-strain curve[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(6)：1 114-1 122.(in Chinese))
[16]	AI C，ZHANG J，LI Y W，et al. Estimation criteria for rock brittleness based on energy analysis during the rupturing process[J]. Rock Mechanics and Rock Engineering，2016，49(12)：4 681-4 698.
[26]	MARTIN C D，CHANDLER N A. The progressive fracture of Lac du Bonnet granite[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1994，31(6)：643-659.
[4]	GONG Q M，ZHAO J. Influence of rock brittleness on TBM penetration rate in Singapore Granite[J]. Tunnelling and Underground Space Technology，2007，22(3)：317-324.
[14]	夏英杰，李连崇，唐春安，等. 基于峰后应力跌落速率及能量比的岩体脆性特征评价方法[J]. 岩石力学与工程学报，2016，35(6)： 1 141-1 154.(XIA Yingjie，LI Lianchong，TANG Chun′an，et al. Rock brittleness evaluation based on stress dropping rate after peak stress and energy ratio[J]. Chinese Journal of Rock Mechanics and Engineering，2016，35(6)：1 141-1 154.(in Chinese))
[24]	YAGIZ S. An investigation on the relationship between rock strength and brittleness[C]// Proceedings of the 59th Geological Congress of Turkey. Ankara，Turkey：MTA General Directory Press，2006：352.
[10]	ALTINDAG R. Assessment of some brittleness indexes in rock- drilling efficiency[J]. Rock Mechanics and Rock Engineering，2010，43(3)：361-370.
[20]	LAWN B R，MARSHALL D B. Hardness，toughness and brittleness：an indentation analysis[J]. Journal of American Ceramic Society，1979，62(7/8)：347-350.
[3]	张镜剑，傅冰骏. 岩爆及其判据和防治[J]. 岩石力学与工程学报，2008，27(10)：2 034-2 042.(ZHANG Jingjian，FU Bingjun. Rockburst and its criteria and control[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(10)：2 034-2 042.(in Chinese))
[5]	YARALI O，KAHRAMAN S. The drillability assessment of rocks using the different brittleness values[J]. Tunnelling and Underground Space Technology，2011，26(2)：406-414.
[7]	夏宏泉，杨双定，弓浩浩，等. 岩石脆性实验及压裂缝高度与宽度测井预测[J]. 西南石油大学学报：自然科学版，2013，35(4)：81-89.(XIA Hongquan，YANG Shuangding，GONG Haohao，et al. Research on rock brittleness experiment and logging prediction of hydraulic fracture height and width[J]. Journal of Southwest Petroleum University：Science and Technology，2013，35(4)：81-89.(in Chinese))
[8]	HUCKA V，DAS B. Brittleness determination of rocks by different methods[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1974，11(10)：389-392.
[17]	张军，艾池，李玉伟，等. 基于岩石破坏全过程能量演化的脆性评价指数[J]. 岩石力学与工程学报，2017，36(6)：1 326-1 340. (ZHANG Jun，AI Chi，LI Yuwei，et al. Brittleness evaluation index based on energy evolution of the whole process of rock failure[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(6)： 1 326-1 340.(in Chinese))
[15]	夏英杰，李连崇，唐春安，等. 储层砂岩破坏特性与脆性指数相关性影响的试验及数值研究[J]. 岩石力学与工程学报，2017，36(1)：10-28.(XIA Yingjie，LI Lianchong，TANG Chun?an，et al. Experiment and numerical research on failure characteristic and brittleness index for reservoir sandstone[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(1)：10-28.(in Chinese))
[18]	陈昀，金衍，陈勉. 基于能量耗散的岩石脆性评价方法[J].力学学报，2015，47(6)：984-993.(CHEN Yun，JIN Yan，CHEN Mian. A rock brittleness evaluation method based on energy dissipation[J]. Chinese Journal of Theoretical and Applied Mechanics，2015，47(6)：984-993.(in Chinese))
[21]	QUINN J B，QUINN G D. Indentation brittleness of ceramics：a fresh approach[J]. Journal of Materials Science，1997，32(16)：4 331- 4 346.
[23]	BLINDHEIM O T，BRULAND A. Boreability testing[C]// Norwegian TBM tunneling—30 years of experience with TBMs in Norwegian tunneling. Trondheim，Norway：Norwegian Soil and Rock Engineering Association，1998：29-34.
[25]	COPUR H，BILGIN N，TUNCDEMIR H，et al. A set of indices based on indentation test for assessment of rock cutting performance and rock properties[J]. Journal of the South African Institute of Mining and Metallurgy，2003，103(9)：589-600.