考虑温度影响的岩土材料高阶屈服函数

doi:10.13722/j.cnki.jrme.2018.0542

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (661 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了探究温度对土体剪胀特性和屈服面的影响，在临界状态土力学的框架下提出一个新的高阶剪胀方程。该高阶剪胀方程引入2个与温度相关的材料参数，对其进行积分可以得到一个新的高阶屈服函数以描述岩土材料屈服面的几何特性，而剑桥模型和修正剑桥模型的屈服函数可以视为其特例；进一步，考虑温度对土体前期固结应力的影响，可以得到一个新的考虑温度影响的屈服函数。将计算结果与试验结果进行对比分析，结果表明，升高温度会导致土体的塑性剪胀因子逐渐减小，同时土体的温度加载也会逐渐收缩。所给出的高阶剪胀方程及考虑温度影响的屈服函数对于不同温度下土体的剪胀特性和屈服面均有着良好的描述效果，为进一步探究温度对土体力学特性的影响规律和建立相应的弹塑性本构模型提供一个新的思路。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李海潮1
	2
	张升1
	2
	沈远3

关键词 ：土力学, 剪胀方程, 屈服函数, 温度, 前期固结应力

Abstract：A high order dilatancy equation for considering the effect of the temperature on the dilatancy behaviors of clays is presented in the framework of critical state mechanics. Two material parameters related to the temperature are introduced in the dilatancy equation. Integrating the high order dilatancy equation will lead to a new yield function which is flexible to represent the experimental data of clays，and yield functions of the original and modified cam clay models can be regarded as the special cases of the new yield surface. Considering the influence of the temperature on the pre-consolidation pressure of clays，a new yield surface was obtained. Comparisons between the prediction results and the experimental datum were performed，and a good agreement between them was observed. It is shown that increasing temperature will lead to the yield surface of clays shrinking and，at the same time，the plastic dilatancy factor will decrease gradually. The proposed high order dilatancy equation and the yield surface related to the temperature can show an insight into the thermodynamic behavior of clays.

Key words： soil mechanics stress-dilatancy relation yield surface temperature pre-consolidation pressure

引用本文:

李海潮1，2，张升1，2，沈远3. 考虑温度影响的岩土材料高阶屈服函数[J]. 岩石力学与工程学报, 2018, 37(12): 2795-2803.
LI Haichao1，2，ZHANG Sheng1，2，SHEN Yuan3. A high order yield function for geo-materials considering the effect of temperature. , 2018, 37(12): 2795-2803.

链接本文:

http://www.rockmech.org/CN/10.13722/j.cnki.jrme.2018.0542 或 http://www.rockmech.org/CN/Y2018/V37/I12/2795

[6]	ZHANG S，LENG W，ZHANG F，et al. A simple thermo-elastoplastic model for geomaterials[J]. International Journal of Plasticity，2012，34：93-113.
[8]	BOUDALI M，LEROUEIL S，SRINIVASA M B R. Viscous behaviour of natural clays[C]// Proceedings of the 13th International Conference on Soil Mechanics and Foundation Engineering. New Delhi，India：Oxford & IBH Publishing，1994：411-416.
[18]	张升，贺佐跃，滕继东，等. 考虑结构性的软岩热弹塑性本构模型研究[J]. 岩石力学与工程学报，2017，36(3)：571-578.(ZHANG Sheng，HE Zuoyue，TENG Jidong，et al. A thermo-elasto-plastic model for soft rocks considering structure[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(3)：571-578.(in Chinese))
[28]	TIDFORS M，SÄLLFORS S. Temperature effect on preconsolidation pressure[J]. Geotechnical Testing Journal，1989，12(1)：93-97.
[3]	HUECKEL T，BALDI G. Thermoplasticity of saturated clays：Experimental constitutive study[J]. Journal of Geotechnical Engineering，1990，116(12)：1 778-1 796.
[10]	UCHAIPICHAT A，KHALILI N. Experimental investigation of thermo-hydro-mechanical behaviour of an unsaturated silt[J]. Géotechnique，2009，59(4)：339-953.
[13]	CUI Y J，SULTAN N，DELAGE P. A thermomechanical model for saturated clays[J]. Canadian Geotechnical Journal，2000，37(3)：607-620.
[15]	HAMIDI A，KHAZAEI C. A thermo-mechanical constitutive model for saturated clays[J]. International Journal of Geotechnical Engineering，2010，10(4)：445-459.
[20]	YAOY P，ZHOU A N. Non-isothermal unified hardening model：a thermo-elasto-plastic model for clays[J]. Geotechnique，2013，63(15)：1 328-1 345.
[23]	ROSCOE K H，BURLAND J B. On the generalized stress-strain behavior of wet clay[C]// Engineering Plasticity. Cambridge，England：Cambridge University Press：1968：535-609.
[25]	ALONSO E E，ROMERO E E，ORTEGA E. Yielding of rockfill in relative humidity-controlled triaxial experiments[J]. ActaGeotechnica，2016，11(3)：455-477.
[30]	MORITZ L. Geotechnical properties of clay at elevated temperatures[M]. Linköping：Swedish Geotechnical Institute，1995.
[5]	ABUEL-NAGA H M，BERGADO D T，BOUAZZA A，et al. Volume change behavior of saturated clays under drained heating conditions： Experimental results and constitutive modeling[J]. Canadian Geotechnical Journal，2007，44(8)：942-956.
[9]	CEKEREVAC C，LALOUI L. Experimental study of thermal effects on the mechanical behaviour of a clay[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2004，28(3)：209-228.
[1]	MITCHELL J K. Shearing resistance of soils as a rate process[J]. Journal of Soil Mechanics and Foundations Div.，1964，90(1)：29-61.
[2]	HOUSTON S L，HOUSTON W N，WILLIAMS N D. Thermo- mechanical behavior of seafloor sediments[J]. Journal of Geotechnical Engineering，1985，111(11)：1 249-1 263.
[4]	GRAHAM J，TANAKA N，CRILLY T，et al. Modified Cam-clay modeling of temperature effects in clays[J]. Canadian Geotechnical Journal，2001，38(3)：608-621.
[11]	ZHOU A N，SHENG D，LI J. Modelling water retention and volume change behaviours of unsaturated soils in non-isothermal conditions[J]. Computers and Geotechnics，2014，55：1-13.
[12]	HUECKEL T，BORSETTO M. Thermoplasticity of saturated soils and shales：constitutive equations[J]. Journal of Geotechnical Engineering，1990，116(12)：1 765-1 777.
[14]	CEKEREVAC C. Thermal effects on the mechanical behaviour of saturated clays：An experimental and constitutive study[Ph. D. Thesis][D]. Lausanne，Switzerland：Ecolepolytechnique Fédérale de Lausanne，2003.
[16]	HAMIDI A，TOURCHI S，KHAZAEI C. Thermomechanical constitutive model for saturated clays based on critical state theory[J]. International Journal of Geomechanics，2014，15(1)：04014038.
[17]	张升，徐硕，熊勇林，等. 软岩热-弹-黏塑性本构模型[J]. 岩土工程学报，2016，38(12)：2 278-2 286.(ZHANG Sheng，XU Shuo，XIONG Yonglin，et al.?Thermo-elasto-viscoplastic model for soft rock[J]. Chinese Journal of Geotechnical Engineering，2016，38(12)：2 278-2 286.(in Chinese))
[7]	MORITZ L，GABRIELSSON A. Temperature effect on the properties of clay[C]// In Soft Ground Technology. [S. l.]：[s. n.]，2001：304-314.
[19]	龚哲，陈卫忠，于洪丹，等. 基于下加载面概念的饱和黏土温度-应力耦合弹塑性模型[J]. 岩石力学与工程学报，2015，34(7)： 1 392-1 401.(GONG Zhe，CHEN Weizhong，YU Hongdan，et al. Thermo-elasto-plastic model for saturated clay based on the concept of subloading surface[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(7)：1 392-1 401.(in Chinese))
[22]	GHAHREMANNEJAD B. Thermo-mechanical behaviour of two reconstituted clays[Ph. D. Thesis][D]. Sydney，Australia：University of Sydney，2003.
[21]	ABUEL-NAGA H. Thermo-mechanical behavior of soft Bangkok clay：experimental results and constitutive modeling[Ph. D. Thesis][D]. Pathumthani，Thailand：Asian Institute of Technology，2005.
[24]	NOVA R，CASTELLANZA R，TAMAGNINI C. A constitutive model for bonded geomaterials subject to mechanical and/or chemical degradation[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2003，27(9)：705-32.
[26]	HVORSLEV M J. Physical components of the shear strength of saturated clays[C]// Proceedings of Research Conference on Shear Strength of Cohesive Soils，ASCE. Reston，VA：[s. n.]，1960：169-273.
[27]	CAMPANELLA R G，MITCHELL J K. Influence of temperature variations on soil behavior[J]. Journal of Soil Mechanics and Foundations Division，1968，94(SM3)：709-734.
[29]	SULTAN N，DELAGE P，CUI Y J. Temperature effects on the volume change behaviour of Boom clay[J]. Engineering Geology，2002，64(2/3)：135-145.