高速铁路级配碎石颗粒三维形态特征多尺度分析

doi:10.13722/j.cnki.jrme.2021.0624

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (2567 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要高速铁路路基级配碎石颗粒形态对宏观力学性质具有显著影响，合理量化颗粒三维形态特征是粗颗粒填料细观机制研究的基础性工作。采用激光扫描仪获取2.36～31.5 mm粒径范围7个粒组共计700个碎石颗粒的点云数据，重构形成三维网格模型；引入描述颗粒表面凹凸特征的主曲率均值平方根RMS，基于颗粒网格模型平滑处理及RMS曲率分布特征，分别定义以棱角区域点云数量占比表征的棱角参数、以平滑前后模型RMS差异描述的纹理参数。结合长、中、短轴相互关系所描述的形状参数，形成刻画碎石颗粒多尺度形态特征的指标体系；通过选取典型形态特征颗粒，验证所建立的指标体系具有良好形态甄别能力；根据所扫描碎石颗粒的统计分析，不同粒组碎石颗粒的形状、棱角、纹理指标基本呈正态分布特征，随粒径增大，块状颗粒占比提高，棱角和纹理特征愈加突出。研究成果可为从宏、中、细观3个尺度量化评价颗粒形态特征提供参考。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	陆瑞1
	2
	罗强1
	2
	刘钢3
	赵春发4
	何心一3

关键词 ：土力学, 级配碎石颗粒, 三维形态特征, RMS曲率, 棱角, 纹理

Abstract：The particle morphology of graded gravels of high-speed railway subgrade has a significant impact on the macro-mechanical properties. Reasonably quantifying the three-dimensional morphological characteristics of the particles is the basic work of the research on the micro-mechanism of fillers. Based on the laser scanner，the point cloud data of 700 gravel particles in 7 particle groups in the range of 2.36–31.5 mm are acquired. And these data are reconstructed to form three-dimensional grid models. By introducing the root mean square curvature (RMS) which describes the surface unevenness of the particles and considering the particle mesh model smoothing process and the RMS curvature distribution characteristics，the angularity parameters are defined by the proportion of the point cloud quantity in the edge area，and the texture parameters are defined by the difference of the model before and after smoothing. Combined with the shape parameters described by the relationship between the long，middle and short axes，the indexes system to describe the multi-scale morphological characteristics of gravel particles is formed. By selecting the particles with typical morphological characteristics，it is verified that the established index system has a good morphology discrimination ability. According to the statistical analysis of the scanned gravel particles，the shape，angularity and texture of the gravel particles in different groups basically present the characteristics of normal distribution. As the particle size increases，the proportion of block particles increases，and the angularity and the texture characteristics are more prominent. The research results can provide a reference for the quantitative evaluation of particle morphological characteristics from macro，medium and micro scales.

Key words： soil mechanics graded gravel three-dimensional morphological characteristic RMS curvature angularity texture

引用本文:

陆瑞1，2，罗强1，2，刘钢3，赵春发4，何心一3. 高速铁路级配碎石颗粒三维形态特征多尺度分析[J]. 岩石力学与工程学报, 2022, 41(S1): 3091-3100.
LU Rui1，2，LUO Qiang1，2，LIU Gang3，ZHAO Chunfa4，HE Xinyi3. Multi-scale analysis of three-dimensional morphological characteristics of graded gravel on high-speed railway. , 2022, 41(S1): 3091-3100.

链接本文:

http://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2021.0624 或 http://rockmech.whrsm.ac.cn/CN/Y2022/V41/IS1/3091

[5]	罗强，梁多伟，王腾飞，等. 铁路路基火山渣填料工程特性试验[J]. 浙江大学学报：工学版，2020，54(12)：2 395-2 404.(LUO Qiang，LIANG Duowei，WANG Tengfei，et al. Engineering properties testing of scoria as railway subgrade fill[J]. Journal of Zhejiang University：Engineering Science，2020，54(12)：2 395-2 404.(in Chinese))
[15]	李瑞泽，卢文波，尹岳降，等. 白鹤滩旱谷地灰岩爆破碎石颗粒形状及比表面积特征研究[J]. 岩石力学与工程学报，2019，38(7)： 1 344-1 354.(LI Ruize，LU Wenbo，YIN Yuejiang，et al. Study on the shape and specific surface area characteristics of blasting gravel particles of limestone in Hangudi quarry of Baihetan[J]. Chinese Journal of Rock Mechanics and Engineering，2019，38(7)：1 344- 1 354.(in Chinese))
[35]	THEODOR Z. Beitrag zur Schotteranalyse[Ph. D. Thesis][D]. Zurich：ETH Zurich，1935：102.
[25]	叶大年，张金民. 非等大球体的任意堆积[J]. 地质科学，1990，(2)：127-136.(YE Danian，ZHANG Jinmin. Haphazard packing of spheres[J]. Scientia Geologica Sinica，1990，(2)：127-136.(in Chinese))
[3]	聂志红，廖靖云，周苏华，等. 火山渣颗粒图像处理及形状定量分析[J]. 湖南大学学报：自然科学版，2020，47(3)：131-139.(NIE Zhihong，LIAO Jingyun，ZHOU Suhua，et al. Image processing and shape quantitative analysis of volcanic cinder particles[J]. Journal of Hunan University：Natural Science，2020，47(3)：131-139.(in Chinese))
[13]	边学成，李伟，李公羽，等. 基于颗粒真实几何形状的铁路道砟剪切过程三维离散元分析[J]. 工程力学，2015，32(5)：64-75. (BIAN Xuecheng，LI Wei，LI Gongyu，et al. Three-dimensional discrete element analysis of railway ballast?s shear process based on particles?s real geometry[J]. Engineering Mechanics，2015，32(5)：64-75.(in Chinese))
[23]	ZHOU B，WANG J，WANG H. Three-dimensional sphericity，roundness and fractal dimension of sand particles[J]. Géotechnique，2018，68(1)：18-30.
[33]	TAUBIN G. A signal processing approach to fair surface design[C]// Proceedings of the 22nd Annual Conference on Computer Graphics and Interactive Techniques-SIGGRAPH? 95. [S. l.]：ACM Press，1995：351-358.
[9]	CHANDAN C，SIVAKUMAR K，MASAD E，et al. Application of imaging techniques to geometry analysis of aggregate particles[J]. Journal of Computing in Civil Engineering，2004，18(1)：75-82.
[19]	XIAO J，ZHANG X，ZHANG D，et al. Morphological reconstruction method of irregular shaped ballast particles and application in numerical simulation of ballasted track[J]. Transportation Geotechnics，2020，24：100374.
[29]	KRUMBEIN W C. Measurement and geological significance of shape and roundness of sedimentary particles[J]. Journal of Sedimentary Research，1941，11(2)：64-72.
[2]	中华人民共和国行业标准编写组. YB10621—2014高速铁路设计规范[S]. 北京：中国铁道出版社，2014.(The Professional Standards Complication Groups of the People?s Republic of China. YB10621—2014 Code for design of high speed railway[S]. Beijing：China Railway Publishing Press，2014.(in Chinese))
[26]	WADELL H. Volume，shape and roundness of rock particles[J]. The Journal of Geology，1932，40(5)：443-451.
[6]	刘钢，赵明志，陆瑞，等. 碎石颗粒形态特征及其与堆积特性的关系[J]. 岩土力学，2019，40(12)：4 644-4 651.(LIU Gang，ZHAO Mingzhi，LU Rui，et al. Morphology characteristics of gravel particle and its relationship with stacking void ratio[J]. Rock and Soil Mechanics，2019，40(12)：4 644-4 651.(in Chinese))
[7]	张家发，叶加兵，陈劲松，等. 碎石颗粒形状测量与评定的初步研究[J]. 岩土力学，2016，37(2)：343-349.(ZHANG Jiafa，YE Jiabing，CHEN Jinsong，et al. A preliminary study of measurement and evaluation of breakstone grain shape[J]. Rock and Soil Mechanics，2016，37(2)：343-349.(in Chinese))
[12]	TUTUMLUER E，HUANG H，HASHASH Y M A，et al. Imaging based discrete element modeling of granular assemblies[C]// AIP Conference Proceedings. [S. l.]：AIP，2008：544-549.
[17]	ZHAO B，WANG J. 3D quantitative shape analysis on form，roundness，and compactness with CT[J]. Powder Technology，2016，291：262-275.
[22]	ZHOU B，WANG J. Generation of a realistic 3D sand assembly using X-ray micro-computed tomography and spherical harmonic-based principal component analysis：generation of a realistic 3D sand assembly[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2017，41(1)：93-109.
[27]	BARRETT P J. The shape of rock particles，a critical review[J]. Sedimentology，1980，27(3)：291-303.
[32]	DONG C，WANG G. Curvatures estimation on triangular mesh[J]. Journal of Zhejiang University—Science A，2005，6(Supp.1)：128-136.
[16]	邹德高，田继荣，刘京茂，等. 堆石料三维形状量化及其对颗粒破碎的影响[J]. 岩土力学，2018，39(10)：3 525-3 530.(ZOU Degao，TIAN Jirong，LIU Jingmao，et al. Three-dimensional shape of rockfill material and its influence on particle breakage[J]. Rock and Soil Mechanics，2018，39(10)：3 525-3 530.(in Chinese))
[20]	ZHAO L，ZHANG S，DENG M，et al. Statistical analysis and comparative study of multi-scale 2D and 3D shape features for unbound granular geomaterials[J]. Transportation Geotechnics，2021，26：100377.
[24]	谭忆秋，邢超，任俊达，等. 基于颗粒堆积理论的沥青混合料细观结构特性研究[J]. 中国公路学报，2017，30(7)：1-8.(TAN Yiqiu，XING Chao，REN Junda，et al. Research on mesostructured characteristics of asphalt mixture based on particle packing theory[J]. China Journal of Highway and Transport，2017，30(7)：1-8.(in Chinese))
[30]	BÖHM W，FARIN G，KAHMANN J. A survey of curve and surface methods in CAGD[J]. Computer Aided Geometric Design，1984，1(1)：1-60.
[4]	汪海年，郝培文. 粗集料二维形状特征的图像描述[J]. 建筑材料学报，2009，12(6)：747-751.(WANG Hainian，HAO Peiwen. Digital description pf tow-dimensional shape characteristics of coarse aggregate[J]. Journal of Building Materials，2009，12(6)：747-751.(in Chinese))
[34]	TAUBIN G，TONG Z，GENE G. Optimal surface smoothing as filter design[M]. Berlin，Heidelberg：Springer Berlin Heidelberg，1996：283-292.
[10]	VALLEJO L E. Fractal analysis of granular materials[J]. Geotechnique，1995，45(8)：159-163.
[8]	AL ROUSAN T M. Characterization of aggregate shape properties using a computer automated system[Ph. D. Thesis][D]. Texas：Texas A and M University，2004.
[1]	中华人民共和国行业标准编写组. TB10001—2016铁路路基设计规范[S]. 北京：中国铁道出版社，2016.(The Professional Standards Complication Groups of the People?s Republic of China. TB 10001—2016 Code for design of earthworks and track bed for railway[S]. Beijing：China Railway Publishing Press，2016.(in Chinese))
[11]	ZHAO L，HUANG D，DAN H，et al. Reconstruction of granular railway ballast based on inverse discrete Fourier transform method[J]. Granular Matter，2017，19(4)：74.
[14]	边学成，李公羽，李伟，等. 基于双平面镜三维成像的粗粒料形状特征分析[J]. 土木工程学报，2014，47(9)：135-144.(BIAN Xuecheng，LI Gongyu，LI Wei，et al. Morphology analysis of coarse aggregate based on 3D imaging method by using two planar mirrors[J]. China Civil Engineering Journal，2014，47(9)：135-144.(in Chinese))
[18]	ZHAO L，ZHANG S，HUANG D，et al. 3D shape quantification and random packing simulation of rock aggregates using photogrammetry- based reconstruction and discrete element method[J]. Construction and Building Materials，2020，262：119986.
[21]	付茹，胡新丽，周博，等. 砂土颗粒三维形态的定量表征方法[J]. 岩土力学，2018，39(2)：483-490.(FU Ru，HU Xinli，ZHOU Bo，et al. A quantitative characterization method of 3D morphology of sand particles[J]. Rock and Soil Mechanics，2018，39(2)：483-490.(in Chinese))
[28]	MAHMOUD E，MASAD E. Experimental methods for the evaluation of aggregate resistance to polishing，abration，and breakage[J]. Journal of Materials in Civil Engineering，2007，19(11)：977-985.
[31]	SANDEEP P，ANSHUMAN R，GERALD F. Improved curvature estimation for watershed segmentation of 3-dimensional meshes[J]. IEEE Transactions on Visualization and Computer Graphics，2001，5(4)：308-321.