RESEARCH ON MEASUREMENT METHOD FOR STRESS OF ROCK EXCAVATION SURFACE UNDER EXTRA-HIGH STRESS
AI Kai，YIN Jianmin，LIU Yuankun，LI Yongsong，WANG Jie
(Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources，Yangtze River Scientific Research Institute，Wuhan，Hubei 430010，China)
Abstract：For the limitations of current in-situ stress measuring methods when they are carried out in high in-situ stress conditions( ＞0.5)，a new goestress measurement method called based on partly restoration slot relief method is proposed to measure in-situ surrounding rock stress in high stress condition，and its feasibility is illustrated by theoretical model. This new method was applied at an experimental tunnel in Jinping II hydropower station，China；and the measured maximum stress is 80 MPa. When the test is carried out，it is not need to obtain intact rock core，meanwhile，the instruments of extra-high pressure is not requried. The device of this method is light weight，the operation is easy and quickly. It can be used to measure in-situ rock stress in high stress condition. it provides measured stress for prevention of the cavern rockburst and slope treatment.
艾 凯，尹健民，刘元坤，李永松，汪 洁. 极高应力条件下岩体开挖面应力测量方法研究[J]. 岩石力学与工程学报, 2012, 31(s2): 3974-3980.
AI Kai，YIN Jianmin，LIU Yuankun，LI Yongsong，WANG Jie . RESEARCH ON MEASUREMENT METHOD FOR STRESS OF ROCK EXCAVATION SURFACE UNDER EXTRA-HIGH STRESS. , 2012, 31(s2): 3974-3980.
[1] 蔡美峰，乔 兰，余 波，等. 金川二矿区深部地应力测量及其分布规律研究[J]. 岩石力学与工程学报，1998，18(4)：414–418.(CAI Meifeng，QIAO Lan，YU Bo，et al. Results and analysis of in-situ stress measurement at deep position of No.2 mining area of Jinchuan mine[J]. Chinese Journal of Rock Mechanics and Engineering，1998，18(4)；414–418.(in Chinese))
[2] 史红光. 二滩水电站左岸导流洞岩爆分析[J]. 水电站设计，1995，11(1)：35–40.(SHI Hongguang. Rockburst analysis in Ertan hydropower plant?s diversion tunnel[J]. Design of Hydroelectric Power Station，1995，11(1)：35–40.(in Chinese))
[3] 王思敬. 中国岩石力学与工程的世纪成就与历史使命[J]. 岩石力学与工程学报，2003，22(6)：867–871.(WANG Sijing. Century achievements and new hierarchical mission of rock mechanics and engineering in China[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(6)：867–871.(in Chinese))
[4] 张镜剑，傅冰骏. 岩爆及其判据和防治[J]. 岩石力学与工程学报，2008，27(10)：2 034–2 042.(ZHANG Jingjian，FU Bingjun. Rockburst and its criteria and control[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(10)：2 034–2 042.(in Chinese))
[5] 周 华，王国进，傅少君，等. 小湾拱坝坝基开挖卸荷松弛效应的有限元分析[J]. 岩土力学，2009，30(4)：1 175–1 180.(ZHOU Hua，WANG Guojin，FU Shaojun，et al. Finite element analysis of foundation unloading and relaxation effects of Xiaowan arch dam[J]. Rock and Soil Mechanics，2009，30(4)：1 175–1 180.(in Chinese))
[6] 刘允芳. 岩体地应力与工程建设[M]. 武汉：湖北科学技术出版社，2000：1–215.(LIU Yunfang. Geostress and engineering construction[M]. Wuhan：Hubei Scientific and Technological Press，2000：1–215.(in Chinese))
[7] 蔡美峰，乔 兰，李华斌. 地应力测量原理和技术[M]. 北京：科学出版社，1995：1–169.(CAI Meifeng，QIAO Lan，LI Huabin. Rock stress measurement principles and techniques[M]. Beijing：Science Press，1995：1–169.(in Chinese))
[8] LEEMAN E R，HAYES D I. A technique for determining the complete state of stress in rock using a single borehole[C]// Proceedings of the First International Congress on Rock Mechanics. Lisboa：[s.n.]，1966：17–24.
[9] LEEMAN E R. The determination of the complete state of stress in rock using a single borehole—laboratory and underground measurements[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1968，5(1)：31–56.
[10] SUGAWARA K，OBARA Y. Draft ISRM suggested method for in situ stress measurement using the compact conical—ended borehole overcoming(CCBO)technique[J]. International Journal of Rock Mechanics and Mining Sciences，1999，36(3)：307–322.
[11] 葛修润，侯明勋. 一种测定深部岩体地应力的新方法——钻孔局部壁面应力全解除法[J]. 岩石力学与工程学报，2004，23(12)：3 923–3 927.(GE Xiurun，HOU Mingxun. New approach to measure goestress—local borehole-wall complete stress relief method[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(12)：3 923–3 927.(in Chinese))
[12] HAIMSON B C，CORNET F H. ISRM Suggested Methods for rock stress estimation—part 3：hydraulic fracturing(HF)and/or hydraulic testing of pre-existing fractures(HTPF)[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(7/8)：1 011–1 020.
[13] CORTHEÂSY R，GUANG He，GILL D E，et al. A stress calculation model for the 3D borehole slotter[J]. International Journal of Rock Mechanics and Mining Sciences，1999，36(3)：493–508.
[14] 周小平，王建华. 测量地应力的新方法[J]. 岩土力学，2002，23(3)：316–320.(ZHOU Xiaoping，WANG Jianhua. The new method to measure geostress of rock mass[J]. Rock and Soil Mechanics，2002，23(3)：316–320.(in Chinese))
[15] 胡 斌，章 光，李光煜. 一次套钻确定三维地应力的新型钻孔变形计[J]. 岩土力学，2006，27(5)：816–822.(HU Bin，ZHANG Guang，LI Guangyu. Determining 3D in-situ stress with a new borehole deformeter by single overcore[J]. Rock and Soil Mechanics，2006，27(5)：816–822.(in Chinese))
[16] 刘允芳，朱杰兵，刘元坤. 空心包体式钻孔三向应变计地应力测量的研究[J]. 岩石力学与工程学报，2001，20(4)：448–453.(LIU Yunfang，ZHU Jiebing，LIU Yuankun. Research on hollow inclusion triaxial strain gauge for geostress measurement[J]. Chinese Journal of Rock Mechanics and Engineering，2001，20(4)：448–453.(in Chinese))
[17] 吕颖慧，刘泉声，江 浩. 基于高应力下花岗岩卸荷试验的力学变形特性研究[J]. 岩土力学，2010，31(2)：337–344.(LU Yinghui，LIU Quansheng，JIANG Hao. Study of mechanical deformation characteristics of granite in unloading experiments of high stress[J]. Rock and Soil Mechanics，2010，31(2)：337–344.(in Chinese))
2012, Vol. 31 
