DETERMINING LONG-TERM STRENGTH OF ROCK WITH DISCONTINUITY USING SHEAR STRESS RELAXATION TEST
LIU Ang1,2,SHEN Mingrong1,JIANG Jingcai2,ZHANG Qingzhao1
(1. Department of Geotechnical Engineering,Tongji University,Shanghai 200092,China;2. Department of Civil and Environmental Engineering,The University of Tokushima,Tokushima 700–8506,Japan)
Abstract:To study the characteristics of shear stress relaxation of rock with a structural plane and the connection between the stress relaxation and the long-term strength,the samples with artificial joint surfaces based on the 4th,6th,and 10th discontinuity lines from Barton′s ten standard lines were made using cement mortar. The shear stress relaxation tests under cyclic loading with the shearing loading value larger than the long-term shear strength were conducted with the biaxial rheological testing machine. The shear stress relaxation was studied based on the test results. The mechanism of interaction between the stress relaxation and the creep was discussed,and a stress relaxation method was proposed to determine the long-term strength.
李永盛. 单轴压缩条件下四种岩石的蠕变和松弛试验研究[J]. 岩石力学与工程学报,1995,14(1):39-47.(LI Yongsheng. Creep and relaxation of four kinds of rocks under uniaxial compression tests[J]. Chinese Journal of Rock Mechanics and Engineering,1995,14(1):39-47.(in Chinese))
[2]
孙 均. 岩石流变力学及其工程应用研究的若干进展[J]. 岩石力学与工程学报,2007,26(6):1 081-1 106.(SUN Jun. Rock rheological mechanics and its advance in engineering applications[J]. Chinese Journal of Rock Mechanics and Engineering,2007,26(6):1 081-1 106. (in Chinese))
[3]
沈明荣,张清照. 绿片岩软弱结构面的剪切蠕变特性研究[J]. 岩石力学与工程学报,2010,29(6):1 149-1 155.(SHEN Mingrong,ZHANG Qingzhao. Study on the shear creep characteristic of greenschist discontinuity[J]. Chinese Journal of Rock Mechanics and Engineering,2010,29(6):1 149-1 155.(in Chinese))
[4]
徐卫亚,杨圣奇. 节理岩石剪切流变特性试验与模型研究[J]. 岩石力学与工程学报,2005,24(增2):5 536-5 542.(XU Weiya,YANG Shengqi. Test study on shear rheological behavior of jointed rock mass and the model investigations[J]. Chinese Journal of Rock Mechanics and Engineering,2005,24(Supp.2):5 536-5 542.(in Chinese))
Your browse does not support frame!