完全充填开采下地表变形特征分析及现状评价

doi:10.13722/j.cnki.jrme.2018.0396

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (918 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要地下金属矿山充填开采往往被认为是控制覆岩移动和保护地表的有效方法之一。为了对桃花嘴金矿10线以西－270～－570 m多中段8 a来完全胶结充填开采下上覆地表变形特征及现状做出合理的分析评价，建立采场安全现状AHP-Fuzzy评价模型和“采场→覆岩及地表”安全分析模式，按照8 a的历史回采顺序模拟分析区域采–充全过程，并将理论分析结果与矿山近2 a的地表沉降观测数据进行对比分析。结果表明：(1) 完全胶结充填开采的25个采场中有22个安全现状属II级较好，11个评价因子中矿体赋存条件、采矿方法以及距离主副井位置对采场及区域安全现状影响相对最为显著；(2) 充填开采岩移区域可分为“相对明显扰动区域”和“微扰动区域”，覆岩中相对明显扰动区域会形成一定高度的“自然岩移拱”，其三维空间形态为近似椭球体，当充填开采达到一定深度时该椭球体对上覆地表影响是微弱的，而微扰动区域则会形成“微沉降盆地”，开采区域上覆地表由2014年前的未扰动状态逐渐转变为0.5～1 mm微扰动状态，充填开采时间效应对地表安全影响微小；(3) 上覆地表布置的3个闭合环线中的各观测点沉降量整体分别沿着0，－3，－6 mm水平线上下稳定波动，观测过程中沉降量均未超过允许变形值。理论分析与实际观测结果基本一致，地表安全现状总体良好。分析成果对矿山安全生产具有指导意义，同时可为类似充填矿山岩移分析提供借鉴。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	江飞飞1
	2
	周辉1
	2
	盛佳3
	4
	帅金山5
	孙德胜5
	胡勇5
	李向东3

关键词 ：采矿工程, 地下金属矿山, 完全充填开采, 地表沉降观测, 地表变形特征, 现状评价

Abstract：Backfill mining is often considered as one of the effective methods to control the movement of overlying strata and to protect the ground surface in underground metal mining. In order to analyse and evaluate deformation characteristics and current situation of overlying surface after 8 years of multi-level completely backfill mining in the west of exploration line 10 of Taohuazui gold mine，an AHP-Fuzzy evaluation model of stope safety was established and the safety analysis mode of“stopes to overlying strata and surface”was put forward. The whole backfill mining process according to the historical sequence of past 8 years was simulated，and the numerical results were compared with the monitored data of surface subsidence in the past 2 years. The results show that 22 of the totally 25 backfill stopes are in good safety condition and belong to level II. The existing condition of orebody，the mining method and the distance from the shafts of 11 evaluated factors are the most significant in influencing the stopes and current regional safety. The strata can be divided into“relative significantly disturbed area”and“micro disturbed area”. The relative significantly disturbed area tends to form a certain height of“Natural rock movement arch”with the morphology of approximately a 3D ellipsoid. The effects of ellipsoid on overlying surface are weak when the backfill mining reaches a certain depth. The micro disturbed area tends to form a“Micro subsidence basin”. The surface of mining area gradually changed from undisturbed status to 0.5–1 mm micro-disturbed status in 2014. The time effect of backfill on surface safety is weak. All the observation points of three closed loops arranged on the surface are in stable fluctuation，which fluctuate along the horizontal lines of 0，－3 and －6 mm respectively. The surface settlement did not exceed the allowed deformation value during the observation period. The calculated results agreed largely with the monitored data. The overall safety of surface is good.

Key words： mining engineering underground metal mine completely backfill surface subsidence observation surface deformation characteristics current situation evaluation

引用本文:

江飞飞1，2，周辉1，2，盛佳3，4，帅金山5，孙德胜5，胡勇5，李向东3. 完全充填开采下地表变形特征分析及现状评价[J]. 岩石力学与工程学报, 2018, 37(10): 2344-2358.
JIANG Feifei1，2，ZHOU Hui1，2，SHENG Jia3，4，SHUAI Jinshan5，SUN Desheng5，HU Yong5，LI Xiangdong3. Analysis and evaluation of surface deformation characteristics under the condition of completely backfill mining. , 2018, 37(10): 2344-2358.

链接本文:

http://www.rockmech.org/CN/10.13722/j.cnki.jrme.2018.0396 或 http://www.rockmech.org/CN/Y2018/V37/I10/2344

[3]	丁德民，马凤山，张亚民，等. 急倾斜矿体分步充填开采对地表沉陷的影响[J]. 采矿与安全工程学报，2010，27(2)：249-254.(DING Demin，MA Fengshan，ZHANG Yamin，et al. Effect of multi-step back filling of steep orebody on ground surface subsidence[J]. Journal of Mining and Safety Engineering，2010，27(2)：249-254.(in Chinese))
[13]	BADRI A，NADEAU S，GBODOSSOU A. A new practical approach to risk management for underground mining project in Quebec[J]. Journal of Loss Prevention in the Process Industries，2013，26(6)： 1 145-1 158.
[15]	黄建文，李建林，周宜红. 基于AHP的模糊评判法在边坡稳定性评价中的应用[J]. 岩石力学与工程学报，2007，26(增1)：2 627- 2 632.(HUANG Jianwen，LI Jianlin，ZHOU Yihong. Application of fuzzy analysis based on AHP to slope stability evaluation[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(Supp.1)： 2 627-2 632.(in Chinese))
[17]	SAATY T L. Relative measurement and its generalization in decision making why pairwise comparisons are central in mathematics for the measurement of intangible factors the analytic hierarchy/network process[J]. RACSAM-Revista de la Real Academia de Ciencias Exactas，Fisicas y Naturales Serie A Matematicas，2008，102(2)：251-318.
[19]	朱合华，张琦，章连洋. Hoek-Brown强度准则研究进展与应用综述[J]. 岩石力学与工程学报，2013，32(10)：1 945-1 963.(ZHU Hehua，ZHANG Qi，ZHANG Lianyang. Review of research progresses and applocations of Hoek-Brown strength criterion[J]. Chinese Journal of Rock Mechanics and Engineering，2013，32(10)：1 945-1 963.(in Chinese))
[4]	彭府华，李庶林，李小强，等. 金川二矿区大体积充填体变形机制与变形监测研究[J]. 岩石力学与工程学报，2015，34(1)：104-113.(PENG Fuhua，LI Shulin，LI Xiaoqiang，et al. Deformation monitoring of bulky backfill in No.2 mine area in Jinchuan[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(1)：104-113.(in Chinese))
[6]	于世波，杨小聪，董凯程，等. 空场嗣后充填法充填体对围岩移动控制作用时空规律研究[J]. 采矿与安全工程学报，2014，31(3)： 430-434.(YU Shibo，YANG Xiaocong，DONG Kaicheng，et al. Space-time rule of the control action of filling body for the movement of surrounding rock in method of the delayed filling open stoping[J]. Journal of Mining and Safety Engineering，2014，31(3)：430-434.(in Chinese))
[8]	中华人民共和国国家标准编写组. GB50771—2012有色金属采矿设计规范[S]. 北京：中国计划出版社，2012.(The National Standards Compilation Group of People?s Republic of China. GB 50771—2012 Code for design of nonferrous metal mining[S]. Beijing：China Planning Press，2012.(in Chinese))
[10]	中华人民共和国行业标准编写组. AQ/T2050.2—2016金属非金属矿山安全标准化规范地下矿山实施指南[S]. 北京：煤炭工业出版社，2016.(The Professional Standards Compilation Group of People?s Republic of China. AQ/T2050.2—2016 The applicable guide of standardized specification of work safety for metal and nonmetal underground mines[S]. Beijing：China Coal Industry Publishing House，2016.(in Chinese))
[14]	原虎军，陈玉明，赵继锋. FAPH在采场安全风险分析中权重分配的应用[J]. 有色金属科学与工程，2010，1(3)：55-58.(YUAN Hujun，CHEN Yuming，ZHAO Jifeng. The application of FAHP in priorities of the stope security?s risk analysis[J]. Nonferrous Metals Science and Engineering，2010，1(3)：55-58.(in Chinese))
[1]	江飞飞，李向东，万兵，等. 盘区二步骤采场嗣后胶结充填对岩层移动影响分析[J]. 矿业研究与开发，2016，36(10)：94-98.(JIANG Feifei，LI Xiangdong，WAN Bing，et al. Influence analysis of strata movement in subsequent cemented filling of panel second-step stopes[J]. Mining Research and Development，2016，36(10)：94-98.(in Chinese))
[2]	赵海军，马凤山，李国庆，等. 充填法开采引起地表移动、变形和破坏的过程分析与机理研究[J]. 岩土工程学报，2008，30(5)：670-676.(ZHAO Haijun，MA Fengshan，LI Guoqing，et al. Analysis and mechanism of ground movement，deformation and fracture induced by underground backfill mining[J]. Chinese Journal of Geotechnical Engineering，2008，30(5)：670-676.(in Chinese))
[5]	YANG Z，ZHAI S，GAO Q，et al. Stability analysis of large-scale stope using stage subsequent filling mining method in Sijiaying iron mine[J]. Journal of Rock Mechanics and Geotechnical Engineering，2015，7(1)：87-94.
[7]	SHESHPARI M. A review of underground mine backfilling methods with emphasis on cemented paste backfill[J]. Electronic Journal of Geotechnical Engineering，2015，20(13)：5 183-5 208.
[9]	中华人民共和国国家标准编写组. GB16423—2006金属非金属矿山安全规程[S]. 北京：中国标准出版社，2006.(The National Standards Compilation Group of People?s Republic of China. GB16423—2006 Safety regulations for metal aud nonmetal mines[S]. Beijing：Standards Press of China，2006.(in Chinese))
[11]	李铀，白世伟，杨春和，等. 矿山覆岩移动特征与安全开采深度[J]. 岩土力学，2005，26(1)：27-32.(LI You，BAI Shiwei，YANG Chunhe，et al. Characters of overburden strata movement of mines and safe mining depth[J]. Rock and Soil Mechanics，2005，26(1)：27-32.(in Chinese))
[12]	NAGHADEHI M Z，MIKAEIL R，ATAEI M. The application of fuzzy analytic hierarchy process(FAHP) approach to selection of optimum underground mining method for Jajarm Bauxite Mine，Iran[J]. Expert Systems with Applications，2009，36(4)：8 218-8 226.
[16]	范英，李辰，晋民杰，等. 三角模糊数和层次分析法在风险评价中的应用研究[J]. 中国安全科学学报，2014，24(7)：70-74.(FAN Ying，LI Chen，JIN Minjie，et al. Research on application of triangular fuzzy number and AHP in risk evaluation[J]. China Safety Science Journal，2014，24(7)：70-74.(in Chinese))
[18]	龚剑，胡乃联，崔翔，等. 基于AHP-TOPSIS评判模型的岩爆倾向性预测[J]. 岩石力学与工程学报，2014，33(7)：1 442-1 448. (GONG Jian，HU Nailian，CUI Xiang，et al. Rockburst tendency prediction based on AHP-TOPSIS evaluation model[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(7)：1 442- 1 448.(in Chinese))
[20]	蔡美峰，何满潮，刘东燕. 岩石力学与工程[M]. 2版. 北京：科学出版社，2013：125-134.(CAI Meifeng，HE Manchao，LIU Dongyan. Rock mechanics and engi-neering[M]. 2nd ed. Beijing：Science Press，2013：125-134.(in Chinese))