基于RPC试件的爆炸应力波作用下I型裂纹扩展行为的研究

doi:10.13722/j.cnki.jrme.2019.0573

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1867 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了研究爆炸荷载下I型裂纹的扩展行为，提出带预制裂纹的矩形板试件(RPC)。采用均匀且透明性好的有机玻璃制作试件。实验系统由超动态应变仪、示波器、恒压电源、电阻应变片以及裂纹扩展计组成。电阻应变片与裂纹扩展计分别被用于测量爆炸荷载与裂纹扩展速度。采用扫描电镜对裂纹扩展断面进行观察。在AUTODYN中模拟RPC试件中的裂纹动态扩展现象，采用JWL方程描述爆生产物的状态，线性状态方程被用于模拟有机玻璃压力与密度的关系，并采用修改的最大主应力准则预测材料的破坏状态。基于位移外推法，在ABAQUS中建立计算裂纹尖端动态应力强度因子的数值模型。通过实验与数值结果可得：(1) 爆炸应力波作用下I型裂纹会形成稳定扩展阶段与不稳定扩展阶段；(2) 裂纹稳定扩展阶段会形成粗糙度逐渐降低的断面，裂纹不稳定扩展阶段形成的断面较为光滑；(3) 裂纹在稳定扩展阶段的速度是在一定范围内波动变化的。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	万端莹1
	2
	朱哲明1
	2
	刘瑞峰1
	2
	刘邦1
	2
	李剑飞1
	2

关键词 ：岩石力学, 爆炸应力波, 裂纹扩展, 断裂韧度, 动态应力强度因子

Abstract：In order to study dynamic propagation of mode I cracks under blast loads，a rectangle plate specimen with a crack，prepared by PMMA with good homogeneity and transparency，was proposed in this paper. The experimental system consists of a high dynamic strain amplifier，an oscilloscope，a constant source，strain gauges and crack propagation gauges. The strain gauges and crack propagation gauges(CPGs) were used to measure the blast load and crack propagation speed respectively，and the scanning electron microscope was applied in studying the property of the fracture surface. AUTODYN was applied in simulating crack dynamic propagation behavior. The JWL equation of state(EOS) and a linear EOS were respectively applied to describe the explosive detonation products and the relationship between the pressure and density of PMMA. A modified principle stress failure criterion was employed to assess the material state. Based on displacement extrapolation method，a numerical model was established in ABAQUS code to acquire dynamic stress intensity factors at the crack tip. The experimental and numerical results show that the propagation of mode-I cracks under blast stress wave can be divided into stable propagation and unstable propagation stages，Fracture surface roughness will decline with crack propagation in the stable propagation stage and fracture surface is relatively smooth in the unstable propagation stage. It is also revealed that crack propagation velocity varies in a certain range in the stage of crack stable propagation.

Key words： rock mechanics blast stress wave crack propagation fracture toughness dynamic stress intensity factor

引用本文:

万端莹1，2，朱哲明1，2，刘瑞峰1，2，刘邦1，2，李剑飞1，2. 基于RPC试件的爆炸应力波作用下I型裂纹扩展行为的研究[J]. 岩石力学与工程学报, 2019, 38(12): 2478-2490.
WAN Duanying1，2，ZHU Zheming1，2，LIU Ruifeng1，2，LIU Bang1，2，LI Jianfei1，2. Study of propagation behaviors of mode I cracks under blasting stress#br# wave based on RPC specimens. , 2019, 38(12): 2478-2490.

链接本文:

http://www.rockmech.org/CN/10.13722/j.cnki.jrme.2019.0573 或 http://www.rockmech.org/CN/Y2019/V38/I12/2478

[34]	RAVI-CHANDAR K. Dynamic fracture[M]. [S. n.]：Elsevier，2004：49-69.
[2]	FREUND L B. Dynamic fracture mechanics[M]. Cambridge：Cambridge University Press，1998：37-54.
[22]	ROSE L R F. On the initial motion of a Griffith crack[J]. International Journal of Fracture，1976，12(6)：829-841.
[32]	DOBRATZ B M，CRAWFORD P C. LLNL explosives handbook[M]. [S. l.]：[s. n.]，1985：2.
[1]	KNAUSS WG，RAVI-CHANDAR K. Some basic problems in stress wave dominated fracture[J]. International Journal of Fracture，1985，27(3/4)：127-143.
[3]	XIA K，YAO W. Dynamic rock tests using split Hopkinson(Kolsky) bar system-A review[J]. Journal of Rock Mechanics and Geotechnical Engineering，2015，7(1)：27-59.
[5]	WANG M，ZHU Z M，DONG Y Q，et al. Study of mixed-mode I/II fractures using single cleavage semicircle compression specimens under impacting loads[J]. Engineering Fracture Mechanics，2017，177：33-44.
[8]	ZHOU L，ZHU Z M，WANG M，et al. Dynamic propagation behavior of cracks emanating from tunnel edges under impact loads[J]. Soil Dynamics and Earthquake Engineering，2018，105：119-126.
[9]	WANG X M，ZHU Z M，WANG M，et al. Study of rock dynamic fracture toughness by using VB-SCSC specimens under medium-low speed impacts[J]. Engineering Fracture Mechanics，2017，181：52-64.
[11]	岳中文，郭洋，王煦，等. 切槽孔爆炸载荷下裂纹扩展行为的实验研究[J]. 岩石力学与工程学报，2015，34(10)：2 018-2 026. (YUE Zongwen，GUO Yang，WANG Xun，et al. Experimental study of crack propagation under blasting load in notched boreholes[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(10)：2 018-2 026.(In Chinese))
[13]	ROSSMANITH H P，DAEHNKE A，NASMILLNER R E K，et al. Fracture mechanics applications to drilling and blasting[J]. Fatigue and Fracture of Engineering Materials and Structures，2008，20(11)：1 617-1 636.
[15]	ZHU Z M，XIE H P，MOHANTY B. Numerical investigation of blasting-induced damage in cylindrical rocks[J]. International Journal of Rock Mechanics and Mining Sciences，2008，45(2)：111-121.
[18]	LI M，ZHU Z M，LIU R，et al. Study of the effect of empty holes on propagating cracks under blasting loads[J]. International Journal of Rock Mechanics and Mining Sciences，2018，103：186-194.
[19]	ZHU Z M，MOHANTY B，XIE H P. Numerical investigation of blasting-induced crack initiation and propagation in rocks[J]. International Journal of Rock Mechanics and Mining Sciences，2007，44(3)：412-424.
[4]	WANG Q Z，YANG J R，ZHANG C G，et al. Sequential determination of dynamic initiation and propagation toughness of rock using an experimental-numerical-analytical method[J]. Engineering Fracture Mechanics，2015，141：78-94.
[6]	WEI M D，DAI F，XU N W，et al. An experimental and theoretical assessment of semi-circular bend specimens with chevron and straight-through notches for mode I fracture toughness testing of rocks[J]. International Journal of Rock Mechanics and Mining Sciences，2017，99：28-38.
[7]	AMROLLAHI H，BAGHBANAN A，HASHEMOLHOSSEINI H. Measuring fracture toughness of crystalline marbles under modes I and II and mixed mode I-II loading conditions using CCNBD and HCCD specimens[J]. International Journal of Rock Mechanics and Mining Sciences，2011，48(7)：1 123-1 134.
[10]	刘瑞峰，朱哲明，李盟，等. 爆炸载荷下Ⅰ型裂纹的起裂及扩展规律研究[J]. 岩石力学与工程学报，2018，37(2)：392-402.(LIU Ruifeng，ZHU Zheming，LI Meng，et al. Initiation and propagation of mode I crack under blasting[J]. Chinese Journal of Rock Mechanics and Engineering，2018，37(2)：392-402.(in Chinese))
[12]	杨仁树，陈程，岳中文，等. 正入射爆炸应力波与运动裂纹作用的动态光弹性实验研究[J]. 煤炭学报，2018，43(1)：87-94.(YANG Renshu，CHEN Cheng，YUE Zhongwen，et al. Dynamic photo-elastic investigation of interaction of normal incidence blasting stress waves with running cracks[J]. Journal of China Coal Society，2018，43(1)：87-94.(in Chinese))
[14]	FAIRLIE G E. The numerical simulation of high explosives using AUTODYN-2D & 3D[C]// In Institute of Explosive Engineers 4th Biannual Symposium. [S. l.]：[s. n.]，1998：743-751.
[16]	ZHU Z M. Numerical prediction of crater blasting and bench blasting[J]. International Journal of Rock Mechanics and Mining Sciences，2009，6(46)：1 088-1 096.
[17]	BANADAKI M D，MOHANTY B. Numerical simulation of stress wave induced fractures in rock[J]. International Journal of Impact Engineering，2012，40：16-25.
[20]	王蒙，朱哲明，谢军. 岩石I-II复合型裂纹动态扩展SHPB实验及数值模拟研究[J]. 岩石力学与工程学报，2015，34(12)：2 474-2 485.(WANG Meng，ZHU Zheming，XIE Jun. Experimental and numerical studies of the mixed-mode I and II crack propagation under dynamic loading using SHPB[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(12)：2 474-2 485.(in Chinese))
[24]	ZHU Z M，XU W T，FENG R Q. A new method for measuring mode-I dynamic fracture toughness of rock under blasting loads[J]. Experimental Techniques，2016，40(3)：899-905.
[26]	YUE Z W，QIU P，YANG R S，et al. Stress analysis of the interaction of a running crack and blasting waves by caustics method[J]. Engineering Fracture Mechanics，2017，184：339-351.
[27]	ZHANG Q B，ZHAO J. Determination of mechanical properties and full-field strain measurements of rock material under dynamic loads[J]. International Journal of Rock Mechanics and Mining Sciences，2013，60(8)：423-439.
[30]	杨井瑞，张财贵，周妍，等. 用CSTBD试样确定砂岩的动态起裂和扩展韧度[J]. 爆炸与冲击，2014，34(3)：264-271.(YANG Jingrui，ZHANG Caigui，ZHOU Yan，et al. Determination of dynamic initiation and propagation toughness of sandstone using CSTBD specimen[J]. Explosion and Shock Waves，2014，34(3)：264-271.(in Chinese))
[21]	FREUND L B. Crack propagation in an elastic solid subjected to general loading—I. Constant rate of extension[J]. Journal of the Mechanics & Physics of Solids，1972，20(3)：129-140.
[23]	JIANG F，VECCHIO K S. Hopkinson bar loaded fracture experimental technique：a critical review of dynamic fracture toughness tests[J]. Applied Mechanics Reviews，2009，62(6)：1 469-1 474.
[25]	WANG Y B，YANG R S. Study of the dynamic fracture characteristics of coal with a bedding structure based on the NSCB impact test[J]. Engineering Fracture Mechanics，2017，184：319-338.
[28]	WANG Q Z，FENG F，NI M，et al. Measurement of mode I and mode II rock dynamic fracture toughness with cracked straight through flattened Brazilian disc impacted by split Hopkinson pressure bar[J]. Engineering Fracture Mechanics，2011，78(12)：2 455-2 469.
[31]	周妍，张财贵，王启智. 用圆孔内单边裂纹平台巴西圆盘和实验-数值-解析法确定砂岩的动态起裂和扩展韧度[J]. 振动与冲击，2017，36(5)：37-47.(ZHOU Yan，ZHANG Caigui，WANG Qizhi. Determination of dynamic initiation toughness and dynamic propagation toughness of sandstone[J]. Journal of Vibration and Shock，2017，36(5)：37-47.(In Chinese))
[33]	BHAT H S，ROSAKIS A J，SAMMIS C G. A micromechanics based constitutive model for brittle failure at high strain rates[J]. Journal of Applied Mechanics，2012，79(3)：031016.
[35]	RAVI-CHANDAR K，KNAUSS W G. An experimental investigation into dynamic fracture：II. Microstructural aspects[J]. International Journal of Fracture，1984，26(1)：65-80.
[29]	苟小平，杨井瑞，王启智，等. 基于P-CCNBD试样的岩石动态断裂韧度测试方法[J]. 岩土力学，2013，34(9)：2 449-2 459.(GOU Xiaoping，YANG Jingrui，WANG Qizhi，et al. Test method for determining rock dynamic fracture toughness using P-CCNBD specimens[J]. Rock and Soil Mechanics，2013，34(9)：2 449-2 459. (in Chinese))