双应力主轴单调旋转下砂土强度及剪切带特性试验研究

doi:10.13722/j.cnki.jrme.2023.0703

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (2105 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了进一步深化对土应力方向依赖性的认识，利用试样旋转和应力旋转一体化的方法实现双应力主轴旋转，并对饱和砂土开展一系列双应力主轴旋转试验。试验结果表明：饱和密砂的强度依赖于主应力方向和试样倾角，且受到两者的耦合作用；随着主应力方向和试样倾角的逐渐增大，相变强度呈现出逐渐减小的规律，破坏强度则表现为先增大后减小；不同的主应力方向和试样倾角对相变强度和破坏强度的耦合作用效果存在差异；此外，研究发现剪切带的发展规律主要取决于主应力方向。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	刘超1
	2
	董彤3
	孔亮1
	2
	王睢4

关键词 ：土力学, 砂土, 双应力主轴旋转, 应力方向依赖性, 强度, 剪切带

Abstract：In order to deepen the understanding of soil stress direction dependence，biaxial rotation of principal stresses was realized by integrating specimen rotation and stress rotation，and a series of undrained fixed-axis shear tests were carried out on saturated dense sand. The results show that the strength of sand is closely related to the principal stress direction and the specimen bedding angle，and is subject to the coupling effect of these two factors. With the increase of the principal stress direction and the specimen bedding angle，the phase transition strength decreases gradually，and the failure strength is first enhanced and then reduced. However，there are differences in the coupling effects of various principal stress directions and specimen bedding angles on the phase transition strength and the failure strength. Furthermore，it is found that the development pattern of the shear band is mainly affected by the principal stress direction.

Key words： soil mechanics sand biaxial rotation of principal stress stress direction dependence strength shear band

引用本文:

刘超1，2，董彤3，孔亮1，2，王睢4 . 双应力主轴单调旋转下砂土强度及剪切带特性试验研究[J]. 岩石力学与工程学报, 2024, 43(7): 1809-1820.
LIU Chao1，2，DONG Tong3，KONG Liang1，2，WANG Sui4. Experimental study on strength and shear band characteristics of sand under biaxial rotation of principal stresses. , 2024, 43(7): 1809-1820.

链接本文:

http://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2023.0703 或 http://rockmech.whrsm.ac.cn/CN/Y2024/V43/I7/1809

[9]	姚仰平，祝恩阳. 横观各向同性土的简明破坏机制解释[J]. 岩土力学，2014，35(2)：328-333.(YAO Yangping，ZHU Enyang. Concise interpretation of damage mechanism for cross-anisotropic soil[J]. Rock and Soil Mechanics，2014，35(2)：328-333.(in Chinese))
[5]	AZAMI A，PIETRUSZCZAK S，GUO P. Bearing capacity of shallow foundations in transversely isotropic granular media[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2010，34(8)：771-793.
[7]	TONG Z，FU P，ZHOU S，et al. Experimental investigation of shear strength of sands with inherent fabric anisotropy[J]. Acta Geotechnica，2014，9(2)：257-275.
[8]	LE N B，TOYOTA H，TAKADA S. Evaluation of mechanical properties of mica-mixed sand considering inherent anisotropy[J]. Soils and Foundations，2020，60(2)：533-550.
[10]	罗强，汤振，马可栓，等. 沉积方向对饱和密砂力学特性的影响[J]. 长江科学院院报，2020，37(1)：113-118.(LUO Qing，TANG Zhen，MA Keshuan，et al. Influence of sedimentary direction on mechanical characteristic of saturated dense sand[J]. Journal of Yangtze River Scientific Research Institute，2020，37(1)：113-118.(in Chinese))
[15]	GEORGIANNOU V N，KONSTADINOU M. Torsional shear behavior of anisotropically consolidated sands[J]. Journal of Geotechnical and Geoenvironmental Engineering，2014，140(2)：04013017-1.
[17]	ZAMANIAN M，JAFARZADEH F. Experimental study of stress anisotropy and noncoaxiality of dense sand subjected to monotonic and cyclic loading[J]. Transportation Geotechnics，2020，23：100331.
[1]	董彤，孔亮，郑颖人. 土的应力方向依赖性(Ⅰ)：概念与现象[J]. 地下空间与工程学报，2022，18(5)：1 452-1 464.(DONG Tong，KONG Liang，ZHENG Yingren. The stress direction dependence of soil (I)：Concepts and Phenomena[J]. Chinese Journal of Underground Space and Engineering，2022，18(5)：1 452-1 464.(in Chinese))
[21]	张启辉，赵锡宏. 主应力轴旋转对剪切带形成的影响分析[J]. 岩土力学，2000，21(1)：32-35.(ZHANG Qihui，ZHAO Xihong. An influence on shear band formation of the rotations of principal stress directions[J]. Rock and Soil Mechanics，2000，21(1)：32-35.(in Chinese))
[2]	ODA M，KOISHIKAWA I，HIGUCHI T. Experimental study of anisotropic shear strength of sand by plane strain test[J]. Soils and Foundations，1978，18(1)：25-38.
[4]	GUO P. Modified direct shear test for anisotropic strength of sand[J]. Journal of Geotechnical and Geoenvironmental Engineering，2008，134(9)：1 311-1 318.
[6]	CHEN R，LEI W，LI Z. Anisotropic shear strength characteristics of a tailings sand[J]. Environmental Earth Sciences，2014，71(12)：5 165-5 172.
[12]	AFZALI-NEJAD A，LASHKARI A，FARHADI B. Role of soil inherent anisotropy in peak friction and maximum dilation angles of four sand-geosynthetic interfaces[J]. Geotextiles and Geomembranes，2018，46(6)：869-881.
[14]	栾茂田，许成顺，何杨，等. 主应力方向对饱和松砂不排水单调剪切特性影响的试验研究[J]. 岩土工程学报，2006，28(9)：1 085-1 089.(LUAN Maotian，XU Chengshun，HE Yang，et al. Strength criteria and slipping planes of anisotropic sand considering direction of major principal stress[J]. Chinese Journal of Geotechnical Engineering，2006，28(9)：1 085-1 089.(in Chinese))
[3]	TATSUOKA F，SAKAMOTO M，KAWAMURA T，et al. Strength and deformation characteristics of sand in plane strain compression at extremely low pressures[J]. Soils and Foundations，1986，26(1)：65-84.
[13]	ZAMANIAN M，MOLLAEI-ALAMOUTI V，PAYAN M. Directional strength and stiffness characteristics of inherently anisotropic sand：The influence of deposition inclination[J]. Soil Dynamics and Earthquake Engineering，2020，137：106304.
[18]	冷艺，栾茂田，许成顺，等. 饱和砂土排水与不排水剪切特性的比较研究[J]. 防灾减灾工程学报，2008，28(2)：143-151.(LENG Yi，LUAN Maotian，XU Chengshun，et al. A comparative study on drained and undrained shear behavior of saturated sands[J]. Journal of Disaster Prevention and Mitigation Engineering，2008，28(2)：143-151.(in Chinese))
[20]	沈扬，梁晖，葛华阳，等. 主应力轴变化下各向异性钙质砂的定轴剪切特性[J]. 岩土工程学报，2020，42(增1)：22-26.(SHEN Yang，LIANG Hui，GE Huayang，et al. Fixed-axis shear characteristics of anisotropic calcareous sand under variation of principal stress axes[J]. Chinese Journal of Geotechnical Engineering，2020，42(Supp.1)：22-26.(in Chinese))
[23]	DONG T，ZHENG Y R，KONG L，et al. Shear strength and shear bands of anisotropic sand[J]. Acta Geotechnica，2022，17(7)：2 841-2 853.
[25]	董彤，刘超，房雨雨，等. 倾斜沉积砂土空心圆柱试样制备方法研究[J]. 岩石力学与工程学报，2022，41(增2)：3 551-3 558. (DONG Tong，LIU Chao，FANG Yuyu，et al. Preparation method of hollow cylindrical sample of inclined sedimentary sand[J]. Chinese Journal of Rock Mechanics and Engineering，2022，41(Supp.2)：3 551-3 558.(in Chinese))
[27]	CAI Y Q，SONG X W，SUN Q，et al. Drained responses of granular soil sheared under inclined principal stress axes：Impact of sample preparation[J]. Engineering Geology，2018，241(26)：33-40.
[28]	马维嘉，秦悠，王常德，等. 复杂应力条件下饱和珊瑚砂各向异性试验研究[J]. 岩土工程学报，2022，44(3)：576-583.(MA Weijia，QIN You，WANG Changde，et al. Experimental study on anisotropy of saturated coral sand under complex stress conditions[J]. Chinese Journal of Geotechnical Engineering，2022，44(3)：576-583.(in Chinese))
[11]	FARHADI B，LASHKARI A. Influence of soil inherent anisotropy on behavior of crushed sand-steel interfaces[J]. Soils and Foundations，2017，57(1)：111-125.
[16]	熊焕. 考虑应力主轴变化下各向异性砂土静动力特性试验研究[博士学位论文][D]. 浙江：浙江大学，2015.(XIONG Huan. Experimental study on the static and dynamic behavior of anisotropic sands involving rotation of principal stress axes[Ph. D. Thesis][D]. Zhejiang：Zhejiang University，2015.(in Chinese))
[19]	MANDOLINI A，DIAMBRA A，IBRAIM E. Strength anisotropy of fibre-reinforced sands under multiaxial loading[J]. Géotechnique，2019，69(3)：203-216.
[22]	YANG L T，LI X，WANATOWSKI D. A laboratory study of anisotropic geomaterials incorporating recent micromechanical understanding[J]. Acta Geotechnica，2016，11(5)：1 111-1 129.
[26]	董彤，郑颖人，孔亮，等. 空心圆柱扭剪试验中广义应力路径的控制与实现[J]. 岩土工程学报，2017，39(增1)：106-110.(DONG Tong，ZHENG Yingren，KONG Liang，et al. Control and realization of generalized stress paths in HCA test[J]. Chinese Journal of Geotechnical Engineering，2017，39(Supp.1)：106-110.(in Chinese))
[24]	童森杰，黄茂松，时振昊，等. 基于初始状态参数的砂土峰值摩擦角和极限强度[J]. 岩石力学与工程学报，2022，41(2)：389-398. (TONG Sengjie，HUANG Maosong，SHI Zhenhao，et al. Peak frictional angle and ultimate drainage strength of sand based on initial state parameter[J]. Chinese Journal of Rock Mechanics and Engineering，2022，41(2)：389-398.(in Chinese))