节理面剪切应力–切向位移曲线峰值后区特性的初步研究

doi:10.13722/j.cnki.jrme.2014.1336

摘要
图/表
参考文献(26)
相关文章 (0)

全文: PDF (2200 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要在节理面剪切试验中，许多剪切应力–位移过程曲线呈现出明显的峰值后区形态。针对这种结构面强度弱化特性，对一组结构面剪切应力–位移过程曲线进行分析，从曲线中获取节理面峰值强度与残余强度。采用一系列应力跌落与塑性流动过程模拟节理面强度弱化过程，通过数值方法再现剪切应力–位移全过程曲线；并进一步研究峰值后区应力–位移曲线与强度弱化的内在关系以及剪胀角演化规律对节理面法向变形的影响，研究成果有助于深化结构面强度与变形特性认识。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	王水林
	郭明伟
	王万军
	郑宏

关键词 ：岩石力学；剪切应力&ndash, 切向位移曲线；强度弱化；峰值后区；岩石节理面

Abstract：During shear test of joints，strength-weakening in post-peak part is observed in many types of shear stress-displacement curves. Aiming at the mechanical characteristics of rock fractures，a set of shear stress- displacement curves was analyzed，and the peak and residual strength parameters were obtained. The shear stress-displacement curve in the post-peak part was approximated in a stepwise way，and the strength-weakening process was simplified as a series of stress drop and plastic flow during the increase of shear displacement. The complete shear stress-displacement curves were modeled and compared with those obtained by lab tests. Furthermore，the internal relationship between strength-weakening and the shear stress-displacement curve in the post-peak part was studied，and the influence of dilatancy angle on the normal displacement was analyzed. The study helps to deepen the understanding of the mechanical characteristics of rock fractures.

Key words： rock mechanics complete shear stress-displacement curve strength-weakening post-peak part rock joints

引用本文:

王水林，郭明伟，王万军，郑宏. 节理面剪切应力–切向位移曲线峰值后区特性的初步研究[J]. 岩石力学与工程学报, 2016, 35(S2): 3805-3812.
WANG Shuilin，GUO Mingwei，WANG Wanjun，ZHENG Hong. A preliminary study of the post-peak characteristics of shear stress-displacement curves of joints. , 2016, 35(S2): 3805-3812.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2014.1336 或 https://rockmech.whrsm.ac.cn/CN/Y2016/V35/IS2/3805

[1]	孙广忠. 岩体结构力学[M].北京：科学出版社，1988：159-161.(SUN Guangzhong. Rock mass structure mechanics[M]. Beijing：Science Press，1988：159-161.(in Chinese))
[2]	GOODMAN RE，TAYLOR R L，BREKKE TL. A model for the mechanics of jointed rock[J]. Journal of the Soil Mechanics and Foundations Division，1968，94(3)：637-660.
[3]	BANDIS S，LUNSDEN AC，BARTON NR. Fundamentals of rock joint deformation[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechnics Abstracts，1983，20(6)：249-269.
[4]	BANDIS S. Experimental studies of scale effects on shear strength and deformation of rock joints[Ph. D. Thesis][D]. Leeds：University of Leeds，1980.
[5]	PLESHA ME. Constitutive models for rock discontinuities with dalatancy and surface degradation[J]. InternationalJournalfor Numerical andAnalytical Methodsin Geomechanics，1987，11：345-362.
[6]	JING L，STEPHANSSON O，NORDLUND E.Study of rock joints under cyclic loading condition[J]. Rock Mechanics andRock Engineering，1993，26(3)：215-232.
[7]	GRASSELLI G，EGGER P.Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(1)：25-40.
[8]	DESAI S C，FISHMAN K L.Plasticity—based constitutive model with associated testing for joint[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechnics Abstracts，1991，28(1)：15-26.
[9]	WANG JG，ICHIKAWAB Y，LEUNG CF.A constitutive model for rock interfaces and joints[J]．International Journal of Rock Mechanics and Mining Sciences，2003，40(1)：41-53.
[10]	葛修润. 岩体中节理面、软弱夹层等的力学性质和模拟分析方法[J]. 岩土力学，1979，1(1)：54-75.(GE Xiurun.The mechanical behaviors and analog analytical method of joints and weak intercalations in rock mass[J]. Rock and Soil Mechanics，1979，1(1)：54-75.(in Chinese))
[11]	葛修润. 岩体中节理面、软弱夹层等的力学性质和模拟分析方法(续)[J]. 岩土力学，1979，1(2)：59-72.(GE Xiurun.The mechanical behaviors and analog analytical method of joints and weak intercalations in rock mass(Continued)[J]. Rock and Soil Mechanics，1979，1(2)：59-72.(in Chinese))
[12]	殷有泉. 考虑损伤的节理本构模型[J]. 工程地质学报，1994，2(4)：1-6.(YIN Youquan.Joint constitutive model considering damage[J].Journal of Engineering Geology，1994，2(4)：1-6.(in Chinese))
[13]	方理刚. 岩石节理弹塑性本构关系[J]. 岩土工程学报，1996，18(3)：91-95.(FANG Ligang.Joint constitutive model for rock[J]. Chinese Journal of Geotechnical Engineering，1996，18(3)：91-95.(in Chinese))
[14]	戚国庆，汪斌，盛金昌，等. 一种新的节理弹塑性本构模型[J]. 金属矿山，2000，(10)：18-20.(QI Guoqing，WANG Bing，SHENG Jinchang，et al.A new joint elastoplastic constitutive model[J]. Metal Mine，2000，(10)：18-20.(in Chinese))
[15]	肖卫国，兑关锁，陈铁林. 剪胀和破坏耦合的节理岩体本构模型的研究[J]. 岩石力学与工程学报，2009，28(12)：2535-2543(XIAO Weiguo，DUI Guansuo，CHEN Tielin，et al. A study of constitutive model coupling dilatancy and degradation for jointed rock[J]. Chinese Journal of Rock Mechanics andEngineering，2009，28(12)：2535-2543.(in Chinese))
[16]	尹显俊，王光纶，张楚汉. 岩体结构面切向循环加载本构关系研究[J].工程力学，2005，22(6)：98-103.(YIN Xianjun，WANG Guanglun，ZHANG Chuhan.Study of constitutive model for rock interfaces and joints under cyclic shear loading[J]. Engineering Mechanics，2005，22(6)：98-103.(in Chinese))
[17]	唐志成，夏才初，肖素光. 节理剪切应力一位移本构模型及剪胀现象分析[J].岩石力学与工程学报，2011，30(5)：917-925.(TANG Zhicheng，XIA Caichu，XIAO Suguang. Constitutive model for joint shear stress-displacement and analysis of dilation[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(5)：917-925.(in Chinese))
[18]	黄书岭，丁秀丽，邬爱清，等. 层状岩体多节理本构模型与试验验证[J]. 岩石力学与工程学报，2012，31(8)：1627-1635.(HUANGShuling，DINGXiuli，WUAiqing，et al.Study of multi-joint constitutive model of layered rockmass and experimental verification[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(8)：1627-1635.(in Chinese))
[19]	方从严，卓家寿. 加锚节理岩体的复合界面元模型[J]. 合肥工业大学学报：自然科学版，2011，34(9)：1365-1369.(FANG Congyan，ZHUO Jiashou.Composite interface stress element model for anchored jointed rock[J]. Journal of Hefei University of Technology：Natural Science，2011，34(9)：1365-1369.(in Chinese))
[20]	朱维申，李术才，陈卫忠. 节理岩体破坏机理和锚固效应及工程应用[M]. 北京：科学出版社，2002：67-72.(ZHU Weishen，LI Shucai，Chen Weizhong. Failure mechanism and anchoring effect of jointed rock mass and its engineering application[M]. Beijing：Science Press，2002：67-72.(in Chinese))
[21]	吴月秀，刘泉声，卢海峰，等. UDEC中Saeb-Amadei节理本构模型的二次开发[J]. 岩石力学与工程学报，2012，31(增1)：3022-3030.(WU Yuexiu，LIU Quansheng，LU Haifeng，et al. Implementation of SAEB-AMADEI model into user-defined joint constitutive model in UDEC[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(Supp.1)：3022-3030.(in Chinese))
[22]	刘雄贞. 三峡工程岩体结构面刚度特性试验[J].长江科学院院报，1998，15(3)：25-27.(LIU Xiongzhen.Experimental study on stiffness characteristics of rockmass structural face in TGP[J]. Journal of Yangtze River Scientific Research institute，1998，15(3)：25-27.(in Chinese))
[23]	孙宗颀. 不连续面应力变形性质研究[J]. 岩石力学与工程学报，1987，6(4)：287-300.(SUN Zongyin.Study on mechanical characteristics of rock mass discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering，1987，6(4)：287-300.(in Chinese))
[24]	刘博，李海波，朱小明. 循环剪切荷载作用下岩石节理强度劣化规律试验模拟研究[J].岩石力学与工程学报，2011，30(10)：2033-2039.(LIU Bo，LI Haibo，ZHU Xiaoming.Experimental simulation study of strength degradation of rock joints under cyclic shear[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(10)：2033-2039.(in Chinese))
[25]	沈明荣，张清照. 规则齿型结构面剪切特性的模型试验研究[J]. 岩石力学与工程学报，2010，29(4)：713-719.(SHEN Mingrong，ZHANG Qingzhao.Experimental study of shear deformation characteristics of rock mass discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(4)：713-719.(in Chinese))
[26]	WANG SL，ZHENG H，LI CG，et al. A finite element implementation of strain-softening rock mass[J].International Journal of Rock Mechanics andMining Sciences，2011，48：67-76.