岩体变形参数确定的经验方法研究

doi:10.13722/j.cnki.jrme.2015.0758

摘要
图/表
参考文献(22)
相关文章 (15)

全文: PDF (951 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要在岩体工程变形分析和稳定性评价时，确定合理的岩体变形模量至关重要。现场试验可直接确定岩体的变形模量，获取的数据相对可靠，但是所需周期长、费用高，当现场试验受到各种制约条件而无法进行时，通过工程岩体分级指标估算岩体变形参数的经验方法，不失为一种经济实惠的选择。目前，国外已有大量学者通过对岩体分级方法的研究，得到了相应的岩体变形参数计算的经验公式，但在国内相关研究的开展则较少。《工程岩体分级标准》是我国岩体分级的国家标准，自1994年颁布以来，在国内岩土工程界得到了广泛的应用，但基于此分级方法来进行岩体变形参数估算方面的研究则相对较少，因此研究基于国标工程岩体分级指标预测岩体变形参数的经验公式具有广泛的应用价值。通过参考国外节理岩体变形模量的经验确定方法，吸取了相关的经验和成果，在搜集国内大型水利水电工程现场试验成果与工程岩体分级指标等相关成果基础上，结合数理统计原理，通过相关性分析，得到基于国标《工程岩体分级标准》BQ值估算岩体变形模量的经验公式。为提高预测岩体变形参数的准确性，通过对实测数据统计分析，得到了根据BQ指标、岩块弹性模量Ei估算岩体变形模量经验公式，并经三峡工程现场变形试验数据验证了该经验公式的可行性。上述研究成果为通过BQ指标估算岩体变形模量提供了一条合理的量化途径。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张占荣1
	杨艳霜2
	赵新益1
	盛谦3
	朱泽奇3

关键词 ：岩石力学, 岩体分级, 变形模量, 经验方法, 工程岩体分级标准, BQ值

Abstract：The deformation modulus of rock mass is a very important input parameter in any analysis of rock mass behaviors which include deformation calculation or stability analysis. In-situ tests，which can determine this parameter directly and is the most reliable methods，are time consuming and expensive. When in-situ tests cant be made enslaved to something，empirical method，which estimates the value of rock mass deformation modulus on the basis of rock mass classification schemes，would be a good choice. A lot of foreign scholars had established empirical relationships between rock mass deformation modulus and classification system，but the domestic researchers pay little attention in this field. Standard for Classification of Engineering Rock Masses，which was issued in 1994，is the national standard of Chinese. It has been widely used in geotechnical engineering，but the research achievement which related to the rock mass parameters are so little that it is very necessary to study in this area. Using the data by a large number of in-situ tests from large-scale water conservancy and hydropower projects in China，a new relationship between the deformation modulus of rock mass and BQ index is proposed，based upon the principle of statistics and correlation analysis. In order to improve the precision of the empirical formula，a new relationship is proposed between the deformation modulus of rock mass and BQ index，the properties of the intact rock，and it is validated by data from the Three Gorges Project. It would be a useful reference for parameter determination of rock mass in our country.

Key words： rock mechanics rock mass classification deformation modulus empirical method standard for classification of engineering rock masses BQ index

引用本文:

张占荣1，杨艳霜2，赵新益1，盛谦3，朱泽奇3. 岩体变形参数确定的经验方法研究[J]. 岩石力学与工程学报, 2016, 35(S1): 3195-3202.
ZHANG Zhanrong1，YANG Yanshuang2，ZHAO Xinyi1，SHENG Qian3，ZHU Zeqi3. Empirical methods to determine the rock masses parameters. , 2016, 35(S1): 3195-3202.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2015.0758 或 https://rockmech.whrsm.ac.cn/CN/Y2016/V35/IS1/3195

[1]	伍佑伦，许梦国. 根据工程岩体分级选择岩体力学参数的探讨[J]. 武汉科技大学学报：自然科学版，2002，25(1)：22-23.(WU Youlun，XU Mengguo. Discussion on mechanical parameters selection based on the quality classification results of rock mass[J].Journal of Wuhan University of Science and Technology：Natural Science，2002，25(1)：22-23.(in Chinese))
[2]	PALMSTRÖM A，SINGH R，The deformation modulus of rock masses-comparisons between in situ tests and indirect estimates[J]. Tunnelling and Underground Space Technology，2001，16(2)：115-131.
[3]	BIENIAWSKI Z T. Determining rock mass deformability：experience from case histories[J]. International Journal of Rock Mechanics and Mining Sciences andGeomechanics Abstracts，1978，15(5)：237-247.
[4]	林韵梅. 岩石分级的理论与实践[M]. 北京：冶金工业出版社，1996：12-25.(LIN Yunmei.Theory and practice on rock classification[M].Beijing：Metallurgical Industry Press，1996：12-25.(in Chinese))
[5]	SERAFIM JL，PEREIRA JP. Consideration on the geomechanical classification of Bieniawski[C]// Proceedings of the International Symposium on Engineering Geology and Underground Construction. Lisbon，Portugal：[s.n.]，1983：33-44.
[6]	READ SAL，RICHARDS LR，PERRIN ND. Applicability of the Hoek-Brown failure criterion to New Zealand greywacke rocks[C]// Proceedings of the Ninth International Congress on Rock Mechanics. Paris：[s.n.]，1999：655-660.
[7]	DIEDERICHS MS，KAISER PK. Stability of large excavations in laminated hard rockmasses：the Voussoir analogue revisited[J]. International Journal of Rock Mechanics and Mining Sciences，1999，36(1)：97-117.
[8]	NICHOLSON GA，BIENIAWSKI ZT. A nonlinear deformation modulus based on rock mass classification[J]. Geotechnical and Geological Engineering，1990，8(3)：181-202.
[9]	MITRI HS，EDRISSI R，HENNING J. Finite element modeling of cablebolted slopes in hard rock ground mines[C]//SME Annual Meeting. New Mexico，Albuquerque：[s.n.]，1994：94-116.
[10]	SONMEZ H，GOKCEOGLU C，KAYABASI A，et al. Estimation of rock modulus：for intact rocks with an artificial neural network and for rock masses with a new empirical equation[J]. International Journal of Rock Mechanics and Mining Sciences，2006，43(2)：224-235.
[11]	RAMAMURTHY T.A geo-engineering classification for rocks and rock masses[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(1)：89-101.
[12]	BARTON N. Some new Qvalue correlations to assist in site characterisation and tunnel design[J]. International Journal of Rock Mechanics and Mining Sciences，2002，39(2)：185-216.
[13]	SINGH S.Time-dependent deformation modulus of rocks in tunnels[M. D. Thesis][D].India：Civil Engineering Department，University of Roorkee，1997.
[14]	SONMEZ H，GOKCEOGLU C，ULUSAY R. Indirect determination of the modulus of deformation of rock masses based on the GSI system[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(5)：849-857.
[15]	HOEK E，DIEDERICHS M S. Empirical estimation of rock mass modulus[J]. International Journal of Rock Mechanics and Mining Sciences，2006，43(2)：203-215.
[16]	中华人民共和国国家标准编写组. GB50218——94 工程岩体分级标准[S]. 北京：中国计划出版社，1994.(The National Standards Compilation Group of People¢s Republic of China. GB50218——94，Standard for engineering classification of rock masses[S]. Beijing：China Planning Press，1994.(in Chinese))
[17]	HOEK E，BROWN ET. Practical estimates of rock mass strength[J]. International Journal of Rock Mechanics and Mining Sciences，1997，34(8)：1165-1 186.
[18]	蔡斌，喻勇，吴晓铭. 《工程岩体分级标准》与Q分类法、RMR分类法的关系及变形参数估算[J]. 岩石力学与工程学报，2001，20(增)：1 677-1 679.(CAI Bin，YU Yong，WU Xiaoming.Relationship among national code，Q system and RMR in rockmass classificationand evaluation of deformation parameter[J]. ChineseJournal of Rock Mechanicsand Engineering，2001，20(Supp.)：1 677-1 679.(in Chinese))
[19]	魏云杰. 中国西南水电工程区峨眉山玄武岩岩体结构特性及其工程应用研究[博士学位论文][D]. 成都：成都理工大学，2007.(WEI Yunjie. Study on characteristics of rock mass structure and engineering application of Emeishan basalts in project site of hydroelectric power station in southwestern China[Ph. D. Thesis][D].Chengdu：Chengdu University of Technology，2007.(in Chinese))
[20]	卢书强. 澜沧江糯扎渡水电站地下洞室群岩体质量分级及其对围岩稳定性的控制作用[博士学位论文][D]. 成都：成都理工大学，2004.(LU Shuqiang. Rock mass quality classification and control on surrounding rockmass stability of the underground cavities of Nuozadu Hydro-electrical Project in Lancang River[Ph. D. Thesis][D].Chengdu：Chengdu University of Technology，2004.(in Chinese))
[21]	张占荣. 裂隙岩体变形特性研究[博士学位论文][D]. 武汉：中国科学院武汉岩土力学研究所，2010.(ZHANG Zhanrong. Study on deformation properties of fractured rock mass[Ph. D. Thesis][D].Wuhan：Institute of Rock and Soil Mechanics，Chinese Academy of Sciences，2010.(in Chinese))
[22]	董学晟. 三峡工程坝址区工程地质与岩石力学研究文集(下册)[R]. 宜昌：中国长江三峡工程开发总公司(筹)，1992.(DONG Xuesheng. Proceedingson engineeringgeology and rock mechanicsin dam site of Three Gorges Project(ii)[R].Yichang：China Changjiang TGP DevelopmentCorp.(Preparing)，1992.(in Chinese))