岩石裂隙法向循环加载本构关系试验研究

摘要
图/表
参考文献(16)
相关文章 (0)

全文: PDF (2312 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要法向变形对岩石裂隙渗流及应力波传播都有重要影响。在分析岩石裂隙法向变形机制的基础上，结合试验曲线循环滞后及其形状特点，探讨岩石裂隙在法向循环加载下的本构关系。试验得到粗晶及细晶大理岩裂隙岩样的15个循环加、卸载法向应力–闭合曲线。第一循环加载曲线与其他加、卸载曲线明显不同，其拟合曲线单独产生。平移其余加、卸载曲线使其低应力端点通过原点后，采用四参数双曲线–幂函数方程拟合所有曲线。加载累计闭合量和卸载残余闭合量与循环次数存在较好的指数函数关系，可确定循环加、卸载拟合曲线的2个端点；通过初次拟合得到加、卸载曲线幂函数项指数与循环次数的关系，再假定各加、卸载拟合曲线通过循环加、卸载拟合曲线的2个端点，获得幂函数系数的表达式；最后通过2次拟合，先后确定加、卸载曲线最大隙宽及初始刚度与循环次数的关系式。将各循环加、卸载曲线的3个参数拟合值代入双曲线–幂函数表达式，并平移各拟合曲线使其通过加卸载拟合曲线的2个端点，可得到拟合精度较好的连续拟合曲线。研究结果对循环加载下岩石裂隙法向闭合的数值模拟具有一定的实用价值。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	郭保华
	李小军
	苏承东

关键词 ：岩石力学；岩石裂隙；法向循环加载；双曲线&ndash, 幂函数；本构关系

Abstract：The normal deformation of rock fracture has important influence on its seepage and stress wave propagation feature. A constitutive model for rock fracture under normal cyclic loading is studied on basis of analyzing normal deformation mechanism of rock fracture，cyclic hysteresis and shape characteristics of test curves. 15 circles of normal closure-stress curves of coarse-grain and fine-grain marble sample fractures are got through laboratory tests. The first cyclic loading curve，whose fitting curve should be generated alone，is significantly different from other loading or unloading curves. A hyperbolic-power function with 4 parameters is chose to fit each loading and unloading curve after translating every curve to let its low-stress endpoint locate at original point. Both the accumulative total loading closure and residual unloading closure have good exponential function relations with cyclic numbers，which can be used to determine two endpoints of each fitting curve. The expression of relationship between the power function index and cyclic numbers is got by first fitting；and then，the expression of the power function coefficient is obtained by assumption of every fitting curve going through two endpoints of its corresponding fitting curve. Finally，the relationships of maximum aperture，initial stiffness and cyclic numbers are identified by next 2 times of orderly fitting. Hence the continuous fitting loading and unloading curves，which has higher fitting precision，can be determined by substituting the fitting values of three parameters into hyperbolic-power function expression；and then translating each curve to let its endpoints locate at the corresponding fitting points. The research has some practical values for numerical simulation of normal stress-closure curve of rock fractures under cyclic loading.

Key words： rock mechanics rock fracture normal cyclic loading hyperbolic-power function constitutive relation

引用本文:

郭保华，李小军，苏承东. 岩石裂隙法向循环加载本构关系试验研究[J]. 岩石力学与工程学报, 2012, 31(S1): 2973-2980.
GUO Baohua，LI Xiaojun，SU Chengdong. EXPERIMENTAL STUDY OF CONSTITUTIVE RELATION FOR ROCK FRACTURE UNDER NORMAL CYCLIC LOADING. , 2012, 31(S1): 2973-2980.

链接本文:

https://rockmech.whrsm.ac.cn/CN/Y2012/V31/IS1/2973

[1] BANDIS S C，LUMSDEN A C，BARTON N R. Fundamentals of rock joint deformation[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1983，20(6)：249–268.

[2] 周建民，许宏发，杨红禹，等. 岩体节理法向变形的数学模型分析[J]. 岩石力学与工程学报，2000，19(增1)：853–855.(ZHOU Jianmin，XU Hongfa，YANG Hongyu，et al. Power function model of normal deformation for rock joints[J]. Chinese Journal of Rock Mechanics and Engineering，2000，19(Supp.1)：853–855.(in Chinese))

[3] MALAMA B，KULATILAKE P H S W. Models for normal fracture deformation under compressive loading[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(6)：893–901.

[4] 俞缙，赵晓豹，赵维炳，等. 改进的岩体节理弹性非线性法向变形本构关系研究[J]. 岩土工程学报，2008，30(9)：1 316–1 321. (YU Jin，ZHAO Xiaobao，ZHAO Weibing，et al. Improved nonlinear elastic constitutive model for normal deformation[J]. Chinese Journal of Geotechnical Engineering，2008，30(9)：1 316–1 321.(in Chinese))

[5] 郭保华，苏承东. 粗晶大理岩裂隙法向闭合曲线的拟合分析[C]// 第十一次全国岩石力学与工程学术大会论文集. 武汉：湖北科学技术出版社，2010：137–141.(GUO Baohua，SU Chengdong. Fitting analysis for normal closure curves of fracture in coarse-grain mable[C]// Proceeding of 11th National Rock Mechanics and Engineering. Wuhan：Hubei Science and Technology Press，2010：137–141.(in Chinese))

[6] Goodman R E，Taylor R L，Brekke T L. A model for the mechanics of jointed rock[J]. Journal of the Soil Mechanics and Foundations Division，1968，99(5)：637–660.

[7] JING L，NORDLUND E，STEPHANSSON O. A 3D constitutive model for rock joints with anisotropic friction and stress dependency in shear stiffness[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1994，31(2)：173–178.

[8] MAKURAT A，AHOLA M，KHAIR K，et al. The decovalex test-case one[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1995，32(5)：399–408.

[9] HUANG T H，CHANG C S，CHAO C Y. Experimental and mathematical modeling for fracture of rock joint with regular asperities[J]. Engineering Fracture Mechanics，2002，69(17)：1 977–1 996.

[10] XIA C C，YUE Z Q，THAM L G，et al. Quantifying topography and closure deformation of rock joints[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(2)：197–220.

[11] BOULON M，ARMAND G，HOTEIT N. Experimental investigations and modeling of shearing of calcite healed discontinuities of grandiosity under typical stresses[J]. Engineering Geology，2002，64(2/3)：117–133.

[12] SOULEY M，HOMAND F，AMADEI B. An extension to the Saeb and Amadei constitutive model for rock joints to include cyclic loading paths[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1995，32(2)：101–109.

[13] Itasca Consulting Group Inc.. UDEC(universal distinct element code) user¢s manual，version 4.0[M]. Minneapolis，USA：Itasca Consulting Group Inc.，2005：5–6.

[14] 尹显俊，王光纶. 岩体结构面法向循环加载本构关系研究[J]. 岩石力学与工程学报，2005，24(7)：1 158–1 163.(YIN Xianjun， WANG Guanglun. Study of constitutive model for rock interfaces and joints under normal cyclic loading[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(7)：1 158–1 163.(in Chinese))

[15] 俞缙，林从谋，赵晓豹. 岩体节理非线性法向循环加载本构模型的改进[J]. 华侨大学学报：自然科学版，2009，30(6)：694–697.(YU Jin，LIN Congmou，ZHAO Xiaobao. Improvement of nonlinear constitutive model for rock fractures under normal cyclic loading[J]. Journal of Huaqiao University：Natural Science，2009，30(6)：694–697.(in Chinese))

[16] 郭保华. 循环加载下岩石裂隙变形与渗流的试验研究[博士学位论文][D]. 焦作：河南理工大学，2010.(GUO Baohua. Experimental study on deformation and seepage characteristics of rock fracture under cyclic loading[Ph. D. Thesis][D]. Jiaozuo：Henan Polytechnic University，2010.(in Chinese)).