|
|
An evaluation method of squeezing degree based on potential squeezing ratio |
ZHANG Chuanqing,ZHOU Hui,ZHU Yong,YANG Fanjie |
(State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences,Wuhan,Hubei 430071,China) |
|
|
Abstract The squeezing deformation of soft rock is a problem in construction of the deep buried or high stress underground caverns in soft rock. The scientific evaluation of the squeezing degree is very important to the stability control of surrounding rock,but the existing methods of stress and deformation evaluation neglect the difference of rock deformability. After the basic concepts of the squeeze and its geological conditions were made clear,the test data of some types of rock was analyzed,which revealed the huge differences in the rock deformability. The potential squeezing ratio index based on the above understanding was put forward in the paper which was confirmed to be good to describe the individual differences. The definitions and criteria of the existing evaluation methods were summarized and analyzed. The obvious deviation of evaluation results based on the widely recognized Hoek?s method was due to the ignoring of rock?s individual differences. The Hoek?s method was thus modified based on the potential squeezing ratio and the evaluation method of squeezing degree based on the potential squeezing ratio was suggested.
|
|
|
|
|
[1] |
中华人民共和国国家标准编写组. GB50218—1994 工程岩体分级标准[S]. 北京:中国标准出版社,1994.(The National Standards Compilation Group of People?s Republic of China. GB50218—1994 Standard for engineering classification of rock masses[S]. Beijing:China Standards Press,1994.(in Chinese))
Your browse does not support frame! | | | |