纤维参数和围压对纤维加筋风沙土力学特性的影响

doi:10.13722/j.cnki.jrme.2015.0991

Abstract
Figure/Table
References (16)
Related Citation (15)

Download: PDF (501 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The influences of fiber length(3–18 mm)，fiber content(0.1%–0.3%) and confining pressure(30– 300 kPa) on strength characteristics of polypropylene fiber reinforced aeolian sandy soil(FRASS) were investigated via unconsolidated-undrained triaxial compression tests. Fibers included in FRASS were randomly distributed. Test results show that failure strength and residual strength of FRASS are substantially enhanced with increasing fiber length，fiber content and confining pressure under given test schedule. The increase in fiber length or fiber content results in a significant increment in cohesion，but a negligible increment in internal friction angle. As fiber length increases，a transition from strain softening to strain hardening is observed for FRASS，while the ductility appears to be unchanged. As fiber content increases，FRASS with fiber length of 3 mm maintains strain softening state and its ductility almost has no change，on the contrary，FRASS with fiber length of 9 mm，as well as 18 mm，presents a transition behavior from strain softening to strain hardening and ductility deserves a remarkable increment. As confining pressure increases，the ductility and the degree of strain hardening of FRASS increase. Failure strength-confining pressure relationship of FRASS exhibits bilinear behavior with bilinearity break occurring at critical confining pressure. At confining pressures less than the critical，the reinforcing effect of fiber inclusion is more pronounced in increasing internal friction angle. At confining pressures higher than the critical，the reinforcing effect of fiber inclusion is more pronounced in the enhancement of cohesion.

Key words： soil mechanics aeolian sandy soil triaxial compression test failure strength fiber length and content confining pressure

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAO Yingying1
	2
	LING Xianzhang1
	ZHANG Feng3
	LI Peng1
	LI Qionglin1
	LI Yan1

Cite this article:

ZHAO Yingying1,2,LING Xianzhang1, et al. EFFECTS OF FIBER PARAMETERS AND CONFINING PRESSURE ON MECHANICAL PROPERTIES OF FIBER REINFORCED AEOLIAN SANDY SOIL[J]. , 2015, 34(S2): 4426-4432.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2015.0991 OR https://rockmech.whrsm.ac.cn/EN/Y2015/V34/IS2/4426

[1]	唐朝生，施斌，高玮，等. 含砂量对聚丙烯纤维加筋黏性土强度影响的研究[J]. 岩石力学与工程学报，2007，26(增1)：2 968- 2 973.(TANG Chaosheng，SHI Bin，GAO Wei，et al. Study on effects of sand content on strength of polypropylene fiber reinforced clay soil[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(Supp.1)：2 968-2 973.(in Chinese))
[2]	TANG CS，SHI B，GAO W，et al. Strength and mechanical behavior of short polypropylene fiber reinforced and cement stabilized clayey soil[J]. Geotextiles and Geomembranes，2007，25(3)：194-202.
[3]	王德银，唐朝生，李建，等. 纤维加筋非饱和黏性土的剪切强度特性[J]. 岩土工程学报，2013，35(10)：1 933-1 940.(WANG Deyin，TANG Chaosheng，LI Jian，et al. Shear strength characteristics of fiber-reinforced unsaturated cohesive soils[J]. Chinese Journal of Geotechnical Engineering，2013，35(10)：1 933-1 940.(in Chinese))
[4]	唐朝生，施斌，高玮，等. 纤维加筋土中单根纤维的拉拔试验及临界加筋长度的确定[J]. 岩土力学，2009，30(8)：2 225-2 230. (TANG Chaosheng，SHI Bin，GAO Wei，et al. Single fiber pull-out test and the determination of critical fiber reinforcement length for fiber reinforced soil[J]. Rock and Soil Mechanics，2009，30(8)：2 225-2 230.(in Chinese))
[5]	TANGC S，SHI B，ZHAO L Z. Interfacial shear strength of fiber reinforced soil[J]. Geotextiles and Geomembranes，2010，28(1)：54-62.
[6]	张金利，蒋正国，杨钢. 聚丙烯纤维红黏土力学特性试验研究[J]. 岩土工程学报，2011，33(增)：420-425.(ZHANG Jinli，JIANG Zhengguo，YANG Gang. Experimental study on mechanical behaviors of polypropylene fiber reinforced clay[J]. Chinese Journal of Geotechnical Engineering. 2011，33(Supp.)：420-425.(in Chinese))
[7]	GRAY D H，OHASHI H. Mechanics of fiber reinforcement in sand[J]. Journal of Geotechnical Engineering，1983，109(3)：335-353.
[8]	MAHER M H，GRAY D H. Static response of sands reinforced with randomlydistributed fibers[J]. Journal of Geotechnical Engineering，1990，116(11)：1661-1677.
[9]	NATARAJM S，MCMANIS K L. Strength and deformation properties of soils reinforced with fibrillated fibers[J]. Geosynthetics International，1997，4(1)：65-79.
[10]	CONSOLIN C，FESTUGATO L，HEINECK K S. Strain-hardening behaviour of fibre-reinforced sand in view of filament geometry[J]. Geosynthetics International，2009，16(2)：109-115.
[11]	MAHER M H，HO Y C. Mechanical properties of kaolinite/fiber soil composite[J]. Journal of Geotechnical Engineering，1994，120(8)：1381-1393.
[12]	YETIMOGLU T，SALBAS O. A study on shear strength of sands reinforcedwith randomly distributed discrete fibers[J]. Geotextiles and Geomembranes，2003，21(2)：103-110.
[13]	MOHAMED A E M K. Improvement of swelling clay properties using hay fibers[J]. Construction and Building Materials，2013，38：242-247.
[14]	ANAGNOSTOPOULOSC A，PAPALIANGAS T T，KONSTANTINIDIS D，et al. Shear strength of sands reinforced with polypropylene fibers[J]. Geotechnical and Geological Engineering，2013，31(2)：401-423.
[15]	蔡奕，施斌，刘志彬，等.团聚体大小对填筑土强度影响的试验研究[J].岩土工程学报.2005，27(12)：1 482-1 486.(CAIYi，SHIBin，LIUZhibin，et al. Experimental study on effect of aggregate size on strength of filled soils[J].Chinese Journal of Geotechnical Engineering. 2005，27(12)：1 482-1 486.(in Chinese))
[16]	O'ROURKE T D，DRUSCHEL S J，NETRAVALI A N. Shear strength characteristicsof sand-polymer interfaces[J]. Journal of Geotechnical Engineering，1990，116(3)：451-469.