1∶1站立式大断面异形盾构管片力学试验系统的研发与应用

doi:10.13722/j.cnki.jrme.2017.0379

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1229 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The bearing capacity，mechanical characteristics and damage mode of the special-shaped shield lining should be explored before application because of its special cross section. A 1∶1‘standing’prototype loading method for special-shaped segmental lining was suggested，and a‘standing’reconfigurable loading and data acquisition platform was developed with a hydraulic control system based on the closed-loop control theory of PLC. The internal force and deformation characteristics of the special-shaped shield lining structure under dead weight and overburden condition were analyzed respectively. The substantial influence of the structural self-weight on the internal force and deformation of the segmental lining under shallow overburden conditions was discovered. The limit burying depth of the lining structure was determined to be 18.5 m，and the analysis of the distribution of the cracks on the inner and outer surfaces of the segmental lining revealed the phenomenon of bending moment transfer.

Key words： tunneling engineering special-shaped shield prototype test 3D laser scanner crack bending moment transfer

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Zixin1
	ZHU Yeting1
	2
	ZHU Yanfei2
	HUANG Xin1
	ZHUANG Qianwei2

Cite this article:

ZHANG Zixin1,ZHU Yeting1,2, et al. Development and application of a 1∶1 mechanical test system for special-shaped shield lining with a large cross-section#br#[J]. , 2017, 36(12): 2895-2905.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2017.0379 OR https://rockmech.whrsm.ac.cn/EN/Y2017/V36/I12/2895

[1]	唐志成，何川，林刚. 地铁盾构隧道管片结构力学行为模型试验研究[J]. 岩土工学报，2005，27(1)：85-89.(TANG Zhicheng，HE Chuan，LIN Gang. Study on mechanical behavior of segment of shield tunnel of metro with model test[J]. Chinese Journal of Geotechnical Engineering，2005，27(1)：85-89.(in Chinese))
[2]	NISHIKAWA K. Development of a prestressed and precast concrete segmental lining[J]. Tunnelling and Underground Space Technology，2003，18(2)：243-251. " target="_blank">
[3]	MOLINS C，ARNAU O. Experimental and analytical study of the structural response of segmental tunnel linings based on an in situ loading test： Part 1： Test configuration and execution[J]. Tunnelling and Underground Space Technology，2011，26(6)：764-777.
[4]	KASHIMA Y，KONDO N，INOUE M. Development and application of the DPLEX shield method： results of experiments using shield and segment models and application of the method in tunnel construction[J]. Tunnelling and Underground Space Technology，1996，11(1)：45-50. " target="_blank">
[5]	NAKAMURA H，KUBOTA T，FURUKAWA M，et al. Unified construction of running track tunnel and crossover tunnel for subway by rectangular shape double track cross-section shield machine[J]. Tunnelling and Underground Space Technology，2003，18(2)：253-262. " target="_blank">
[6]	LUTTIKHOLT A. Ultimate limit state analysis of a segmented tunnel lining[M. S. Thesis][D]. Delft：Delft University of Technology，2007. " target="_blank">
[7]	何川，封坤，苏宗贤. 大断面水下盾构隧道原型结构加载试验系统的研发与应用[J]. 岩石力学与工程学报，2011，30(2)：254-266.(HE Chuan，FENG Kun，SU Zongxian. Development and application of loading test system of prototype structure for underwater shield tunnel with large cross-section[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(2)：254-266.(in Chinese))
[8]	王彪，刘祖华，鲁亮. 上海崇明越江隧道衬砌整环试验加载方法研究[J]. 施工技术，2006，35(增)：52-54.(WANG Biao，LIU Zuhua，LU Liang. A loading method of the test for lining whole wreath of Shanghai Chongming tunnel[J]. Construction Technology， 2006，35(Supp.)：52-54.(in Chinese))
[9]	毕湘利，柳献，王秀志，等. 通缝拼装盾构隧道结构极限承载力的足尺试验研究[J]. 土木工程学报，2014，47(10)：117-127.(BI Xiangli，LIU Xian，WANG Xiuzhi，et al. Experimental investigation on the ultimate bearing capacity of continuous-jointed segmental tunnel linings[J]. China Civil Engineering Journal，2014，47(10)：117-127.(in Chinese))
[10]	LIU X，DONG Z B，BAI Y，et al. Investigation of the structural effect induced by stagger joints in segmental tunnel linings： First results from full-scale ring tests[J]. Tunnelling and Underground Space Technology，2017，66(1)：1-18. " target="_blank">
[11]	LIU X，BAI Y，YUAN Y，et al. Experimental investigation of the ultimate bearing capacity of continuously jointed segmental tunnel linings[J]. Structure and Infrastructure Engineering，2016，12(10)：1-16. " target="_blank">
[12]	BOWLES J E. Foundation analysis and design[M]. New York：McGraw-Hill，1988：855-868. " target="_blank">
[13]	中华人民共和国国家标准编写组. GB50157—2013 地铁设计规范[S]. 北京：中国建筑工业出版社，2013.(The National Standards Compilation Group of People?s Republic of China. GB50157—2013 Code for design of metro[S]. Beijing：China Architecture and Building Press，2013.(in Chinese)) " target="_blank">