节理粗糙度对应力波传播的影响研究

doi:10.13722/j.cnki.jrme.2017.1111

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (468 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To study the influence of smooth and rough joint on stress wave propagation in rock mass and the mechanical properties of jointed rocks，experimental research was carried out by using split Hopkinson pressure bar(SHPB) system. The effect of joint matching degree coefficient(JMDC) on the stress wave propagation was qualitatively studied. The projection covering method was used to analyze the joint surface，and the influence of fractal dimension on stress wave propagation was studied. Rough joint surface specimens were obtained from the splitting test，and two standard specimens were combined to obtain the smooth joint surface specimens. To get the same incident stress pulse，a series of SHPB experiments were conducted on the rock specimens with smooth joint and rough joint. It was shown that the transmission coefficients and stiffness of smooth joints rock specimen reduce 2.1% compared with intact rock specimen，the smooth joints have little influence on stress wave propagation in the test. The transmission coefficient and stiffness of joint rock specimens were influenced by the difference of joint forms. The greater the joint roughness(the fractal dimension is 2.088–2.214)，the smaller the transmission coefficient and stiffness of the rock joint specimen，where the equivalent stiffness is approximately linearly reduced and the transmission coefficient is reduced by a quadratic curve. When joint roughness(fractal dimension) were the same，the smaller the JMDC，the smaller the transmission coefficient and the equivalent stiffness，which indicates that JMDC is an important influencing factor of the stress wave propagation.

Key words： rock mechanics jointed rocks stress wave propagation transmission coefficient fractal model joint matching degree

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Miao
	QIAO Lan
	ZHOU Ming
	LI Yuan

Cite this article:

LI Miao,QIAO Lan,ZHOU Ming, et al. Research of the joint roughness effects on stress wave propagation[J]. , 2019, 38(S1): 2840-2847.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2017.1111 OR https://rockmech.whrsm.ac.cn/EN/Y2019/V38/IS1/2840

[1]	赵坚，蔡军刚，赵晓豹，等. 弹性纵波在具有非线性法向变形本构关系的节理处的传播特征[J]. 岩石力学与工程学报，2003，22(1)：9–17.(ZHAO Jian，CAI Jungang，ZHAO Xiaobao，et al. Transmission of elastic P-waves across single fracture with nonlinear normal deformation behavior[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(1)：9–17.(in Chinese))
[2]	SCHOENBERG G. Elastic wave behavior across linear interfaces[J]. Journal of the Acoustical Society of America，1980，68(5)：65–77.
[3]	LI J C，MA G W. Experimental study of stress wave propagation across a filled rock joint[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(3)：471–478.
[4]	SEINOV N P，CHEVKIN A I. Effect of fissure on the fragmentation of a medium by blasting[J]. Journal of Mining Science，1968，4(3)：254–259.
[5]	陈新，廖志红，李德建. 节理倾角及连通率对岩体强度、变形影响的单轴压缩试验研究[J]. 岩石力学与工程学报，2011，30(4)：781–789.(CHEN Xin，LIAO Zhihong，LI Dejian. Experimental study on the effect of joint orientation and persistence on the strength and deformation properties of rock masses under uniaxial compression[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(4)：781–789.(in Chinese))
[6]	BARTON N，CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Rock Mechanics and Rock Engineering，1977，10(1)：1–54.
[7]	赵坚. 岩石节理吻合系数及其对节理特性的影响[J]. 岩石力学与工程学报，1997，16(6)：514–521.(ZHAO Jian. Joint match coefficient and effects to behavior of rock joint[J]. Chinese Journal of Rock Mechanics and Engineering，1997，16(6)：514–521.(in Chinese))
[8]	CHEN X，LI J C，CAI M F，et al. Experimental study on wave propagation across a rock joint with rough surface[J]. Rock Mechanics and Rock Engineering，2015，48(6)：2 225–2 234.
[9]	CHEN X，LI J C，CAI M F，et al. A further study on wave propagation across a single joint with different roughness[J]. Rock Mechanics and Rock Engineering，2016，49(7)：2 701–2 709.
[10]	陈昕，李建春，任奋华，等. JMC对应力波透射系数和节理比刚度影响的实验研究[J]. 岩石力学与工程学报，2016，35(5)：957–963.(CHEN Xin，LI Jianchun，REN Fenhua，et al. Experimental research of JMC effect on stress wave propagation and joint specific stiffness[J]. Chinese Journal of Rock Mechanics and Engineering，2016，35(5)：957–963.(in Chinese))
[11]	李娜娜，李建春，李海波，等. 节理接触面对应力波传播影响的SHPB试验研究[J]. 岩石力学与工程学报，2015，34(10)：1 994–2 000.(LI Nana，LI Jianchun，LI Haibo，et al. SHPB Experiment on influence of contact area of joints on propagation of stress wave[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(10)：1 994–2 000.(in Chinese))
[12]	鞠杨，李业学，谢和平，等. 节理岩石的应力波动与能量耗散[J].岩石力学与工程学报，2006，25(12)：2 426–2 434.(JU Yang，LI Yexue，XIE Heping，et al. Stress wave propagation and energy dissipation in jointed rocks[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(12)：2 426–2 434.(in Chinese))
[13]	李夕兵. 岩石动力学基础与应用[M]. 北京：科学出版社，2014：67–110.(LI Xibing. Rock dynamics fundamentals and applications[M]. Beijing：Science Press，2014：67–110.(in Chinese))
[14]	ZHOU Y X，XIA K，LI X B，et al. Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials[J]. International Journal of Rock Mechanics and Mining Sciences，2012，49(1)：105–112.
[15]	王煜曦. 岩石断裂表面细观接触演化与剪切力学模型研究[博士学位论文][D]. 北京：北京科技大学，2016.(WANG Yuxi. Study on micro-contact evolution and shear mechanical model of fractured rock surfaces[Ph. D. Thesis][D]. Beijing：University of Science and Technology Beijing，2016.(in Chinese))