忻州窑烟煤I型和II型断裂特性的半圆弯曲试验对比研究

doi:10.13722/j.cnki.jrme.2019.0306

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (4835 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the influence of the crack length and the bedding angle on the characteristics of modes I and II fracture of coal，the specimens with three kinds of crack lengths and five kinds of bedding angles were tested by using the semi-circular bending test method. The influence of the crack length and the bedding angle on the peak load，the fracture toughness and the crack propagation path of modes I and II fracture were analyzed. The acoustic emission signals were monitored and the microcrack damage evolution and macroscopic failure characteristics were obtained. The experimental results indicate that the peak load and the fracture toughness of model II fracture of bituminous coal are respectively greater than those of mode I fracture and KIIC/KIC equals to 1.02. With increasing the dimensionless crack length α，the peak loads of both modes I and II of coal decrease gradually while both KIC and KIIC increase first and then decrease. Both the peak load and the fracture toughness of model II decrease first and increase in a “check” pattern with rising the bedding angle. The crack propagation paths of modes I and II fracture of coal are respectively linear and nonlinear. Beddings have a great influence on the crack growth path of mode II fracture，and the crack propagates along the bedding plane as the bedding angle is 22.5°，45°or 90°. The fracture failure process of modes I and II fracture can be classified to be three stages as compaction，steady crack propagation and unsteady crack propagation. In general，modes I and II fracture present a mixed tensile-shear behavior dominated by tensile cracks. More specifically，the tensile microcracks develop first，then the tensile and shear composite microcracks expand extremely and finally failure occurs.

Key words： mining engineering coal sample mode II fracture semi-circular bending crack length bedding angle acoustic emission

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAO Yixin1
	2
	SUN Zhuang2
	LIU Bin2

Cite this article:

ZHAO Yixin1,2,SUN Zhuang2, et al. Comparative study of semi-circular bending tests for modes I and II#br# fracture characteristics of Xinzhouyao bituminous coal[J]. , 2019, 38(8): 1593-1604.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2019.0306 OR https://rockmech.whrsm.ac.cn/EN/Y2019/V38/I8/1593

[1]	钱鸣高，石平五，许家林. 矿山压力与岩层控制[M]. 徐州：中国矿业大学出版社，2010：100-119.(QIAN Minggao，SHI Pingwu，XU Jialin. Mining pressure and strata control[M]. Xuzhou：China University of Mining and Technology Press，2010：100-119.(in Chinese))
[2]	AWAJI H，SATO S. Combined mode fracture toughness measurement by the disk test[J]. Journal of Engineering Materials and Technology Transactions of the Asme，1978，100(2)：175.
[3]	CHANG S H，LEE C I，JEON S. Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc-type specimens[J]. Engineering Geology，2002，66(1)：79-97.
[4]	华文，董世明，徐积刚. 复合型加载条件下锈岩断裂韧度试验研究[J]. 岩土力学，2016，37(3)：753-758.(HUA Wen，DONG Shiming，XU Jigang. Experimental research on fracture toughness of rust stone under mixed mode loading conditions[J]. Rock and Soil Mechanics，2016，37(3)：753-758.(in Chinese))
[5]	陈建国，邓金根，袁俊亮，等. 页岩储层I型和II型断裂韧性评价方法研究[J]. 岩石力学与工程学报，2015，34(6)：1 101-1 105. (CHEN Jianguo，DENG Jingen，YUAN Junliang，et al. Determination of fracture toughness of modes I and II of shale formation[J]. Chinese Journal of Rock Mechanics and Engineering，2015，4(6)：1 101- 1 105.(in Chinese))
[6]	AYATOLLAHI M R，ALIHA M R M. Fracture toughness study for a brittle rock subjected to mixed mode I/II loading[J]. International Journal of Rock Mechanics and Mining Sciences，2007，44(4)：617-624.
[7]	AYATOLLAHI M R，ALIHA M R M，HASSANI M M. Mixed mode brittle fracture in PMMA—An experimental study using SCB specimens[J]. Materials Science and Engineering A，2006，417(1)：348-356.
[8]	ALIHA M R M，AYATOLLAHI M R. Mixed mode I/II brittle fracture evaluation of marble using SCB specimen[J]. Procedia Engineering，2011，10(1)：311-318.
[9]	ZABIHI M，AYATOLLAHI M R，REZAIE H R. Mixed-mode fracture of synthesized nanocrystalline forsterite for biomedical applications[J]. Theoretical and Applied Fracture Mechanics，2018：S0167844218300193.
[10]	冯若琪，朱哲明，范勇. 砂岩半圆盘弯曲的复合型断裂性质及准则研究[J]. 工程科学与技术，2016，48(增1)：121-127.(FENG Ruoqi，ZHU Zheming，FAN Yong. Research on mixed-mode fracture properties and criteria by using sandstone SCB specimen[J]. Journal of Sichuan University：Engineering Science，2016，48(Supp.1)：121-127.(in Chinese))
[11]	AYATOLLAHI M R，ALIHA M R M. On determination of mode II fracture toughness using semi-circular bend specimen[J]. International Journal of Solids and Structures，2006，43(17)：5 217-5 227.
[12]	AYATOLLAHI M R，ALIHA M R M. Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading[J]. Computational Materials Science，2007，38(4)：660-670.
[13]	FUNATSU T，KURUPPU M，MATSUI K. Effects of temperature and confining pressure on mixed-mode(I-II) and mode II fracture toughness of Kimachi sandstone[J]. International Journal of Rock Mechanics and Mining Sciences，2014，67：1-8.
[14]	AYATOLLAHI M R，MIRMOHAMMADI S A，SHIRAZI H A. The tension-shear fracture behavior of polymeric bone cement modified with hydroxyapatite nano-particles[J]. Archives of Civil and Mechanical Engineering，2018，18(1)：50-59.
[15]	YANG J，LIAN H，LIANG W，et al. Experimental investigation of the effects of supercritical carbon dioxide on fracture toughness of bituminous coals[J]. International Journal of Rock Mechanics and Mining Sciences，2018，107：233-242.
[16]	AYATOLLAHI M R，ALIHA M R M，SAGHAFI H. An improved semi-circular bend specimen for investigating mixed mode brittle fracture[J]. Engineering Fracture Mechanics，2011，78(1)：110-123.
[17]	MARSAVINA L，CONSTANTINESCU D M，LINUL E，et al. Refinements on fracture toughness of PUR foams[J]. Engineering Fracture Mechanics，2014，129：54-66.
[18]	SAGHAFI H，AYATOLLAHI M R，SISTANINIA M. A modified MTS criterion(MMTS) for mixed-mode fracture toughness assessment of brittle materials[J]. Materials Science and Engineering：A(Structural Materials：Properties，Microstructure and Processing)，2010，527(21/22)：5 624-5 630.
[19]	KURUPPU M D，OBARA Y，AYATOLLAHI M R，et al. ISRM- suggested method for determining the mode I static fracture toughness using semi-circular bend specimen[J]. Rock Mechanics and Rock Engineering，2014，47(1)：267-274.
[20]	DARBAN H，HAGHPANAHI M，ASSADI A. Determination of crack tip parameters for ASCB specimen under mixed mode loading using finite element method[J]. Computational Materials Science，2011，50(5)：0-1 674.
[21]	张晓敏，万玲，严波，等. 断裂力学[M]. 北京：清华大学出版社，2012：35-43.(ZHANG Xiaomin，WAN Ling，YAN Bo，et al. Fracture mechanics[M]. Beijing：Tsinghua University Press，2012：35-43.(in Chinese))
[22]	SIH G C. Strain-energy-density factor applied to mixed mode crack problems[J]. International Journal of Fracture，1974，10(3)：305-321.
[23]	COTTERELL B，RICE J R. Slightly curved or kinked cracks[J]. International Journal of Fracture，1980，16(2)：155-169.
[24]	ZHAO Y，GONG S，HAO X，et al. Effects of loading rate and bedding on the dynamic fracture toughness of coal：Laboratory experiments[J]. Engineering Fracture Mechanics，2017，S0013794417302746.
[25]	TAVALLALI A，ANDRÉ V. Effect of layer orientation on the failure of layered sandstone under Brazilian test conditions[J]. International Journal of Rock Mechanics and Mining Sciences，2010，47(2)：313-322.
[26]	刘运思，傅鹤林，饶军应，等. 不同层理方位影响下板岩各向异性巴西圆盘劈裂试验研究[J]. 岩石力学与工程学报，2012，31(4)：785-791.(LIU Yunsi，FU Helin，RAO Junying，et al. Research on Brazilian disc splitting tests for anisotropy of slate under influence of different bedding orientations[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(4)：785-791.( in Chinese))
[27]	何满潮，赵菲，杜帅，等. 不同卸载速率下岩爆破坏特征试验分析[J]. 岩土力学，2014，35(10)：2 737-2 747.(HE Manchao，ZHAO Fei，DU Shuai，et al. Rockburst characteristics based on experimental tests under different unloading rates[J]. Rock and Soil Mechanics，2014，35(10)：2 737-2 747.(in Chinese))
[28]	沙鹏，伍法权，常金源. 大理岩真三轴卸载强度特征与破坏力学模式[J]. 岩石力学与工程学报，2018，37(9)：2 084-2 092.(SHA Peng，WU Faquan，CHANG Jinyuan. Unloading strength and failure pattern of marble under true triaxial test[J]. Chinese Journal of Rock Mechanics and Engineering，2018，37(9)：2 084-2 092.(in Chinese))
[29]	AGGELIS D G. Classification of cracking mode in concrete by acoustic emission parameters[J]. Mechanics Research Communications，2011，38(3)：153-157.
[30]	EBRAHIMI M E，CHEVALIER J，FANTOZZI G. Slow crack-growth behavior of alumina ceramics[J]. Journal of Materials Research，2000，15(1)：142-147.
[31]	ZHANG Z X. An empirical relation between mode I fracture toughness and the tensile strength of rock[J]. International Journal of Rock Mechanics and Mining Sciences，2002，39(3)：401-406.