[1] |
ZHAO Y,ZHANG L,WANG W,et al. Cracking and stress-strain behavior of rock-like material containing two flaws under uniaxial compression[J]. Rock Mechanics and Rock Engineering,2016,49(7):2 665-2 687.
|
[2] |
刘红岩,黄妤诗,李楷兵,等.预制节理岩体试件强度及破坏模式的试验研究[J]. 岩土力学,2013,34(5):1 235-1 241.(LIU Hongyan,HUANG Yushi,LI Kaibing,et al. Test study of strength and failure mode of pre-existing jointed rock mass[J]. Rock and Soil Mechanics,2013,34(5):1 235-1 241.(in Chinese))
|
[3] |
LIU Y,DAI F,DONG L,et al. Experimental investigation on the fatigue mechanical properties of intermittently jointed rock models under cyclic uniaxial compression with different loading parameters[J]. Rock Mechanics and Rock Engineering,2018,51(1):47-68.
|
[4] |
LIN Q,CAO P,MENG J,et al. Strength and failure characteristics of jointed rock mass with double circular holes under uniaxial compression:Insights from discrete element method modelling[J]. Theoretical and Applied Fracture Mechanics,2020,109:102692.
|
[5] |
LIN Q,CAO P,LIU Y,et al. Mechanical behaviour of a jointed rock mass with a circular hole under compression-shear loading: Experimental and numerical studies[J]. Theoretical and Applied Fracture Mechanics,2021,114:102998.
|
[6] |
王培涛,刘 雨,章 亮,等. 基于3D打印技术的裂隙岩体单轴压缩特性试验初探[J]. 岩石力学与工程学报,2018,37(2):364-373.(WANG Peitao,LIU Yu,ZHANG Liang,et al. Preliminary experimental study on uniaxial compressive properties of 3D printed fractured rock models[J]. Chinese Journal of Rock Mechanics and Engineering,2018,37(2):364-373.(in Chinese))
|
[7] |
张 波,李术才,杨学英,等. 含交叉裂隙节理岩体单轴压缩破坏机制研究[J]. 岩土力学,2014,35(7):1 863-1 870.(ZHANG Bo,LI Shucai,YANG Xueying,et al. Uniaxial compression failure mechanism of jointed rock mass with cross-cracks[J]. Rock and Soil Mechanics,2014,35(7):1 863-1 870.(in Chinese))
|
[8] |
张 波,李术才,杨学英,等. 含交叉裂隙节理岩体锚固效应及破坏模式[J]. 岩石力学与工程学报,2014,33(5):996-1 003.(ZHANG Bo,LI Shucai,YANG Xueying,et al. Bolting effect and failure modes jointed rock masses with cross-cracks[J]. Chinese Journal of Rock Mechanics and Engineering,2014,33(5):996-1 003.(in Chinese))
|
[9] |
张 波,李术才,杨学英,等. 含交叉裂隙岩体相似材料试件力学性能单轴压缩试验[J]. 岩土力学,2012,33(12):3 674-3 679.(ZHANG Bo,LI Shucai,YANG Xueying,et al. The uniaxial compression tests on mechanical properties of rock mass similar material with cross-crack[J]. Rock and Soil Mechanics,2012,33(12):3 674-3 679.(in Chinese))
|
[10] |
张志强,李 宁,陈方方,等. 非贯通裂隙岩体破坏模式研究现状与思考[J]. 岩土力学,2009,30(增2):142-148.(ZHANG Zhiqiang,LI Ning,CHEN Fangfang,et al. Review and status of research on failure mode of nonpenetrative fractured rock mass[J]. Rock and Soil Mechanics,2009,30(2):142-148.(in Chinese))
|
[11] |
FAN X,KULATILAKE P H S W,CHEN X,et al. Crack initiation stress and strain of jointed rock containing multi-cracks under uniaxial compressive loading:A particle flow code approach[J]. Journal of Central South University,2015,22(2):638-645.
|
[12] |
张社荣,孙 博,王 超,等. 双轴压缩试验下岩石裂纹扩展的离散元分析[J]. 岩石力学与工程学报,2013,32(增2):3 083-3 091. (ZHANG Sherong,SUN Bo,WANG Chao,et al. Discrete element analysis of crack propagation in rocks under biaxial compression[J]. Chinese Journal of Rock Mechanics and Engineering,2013,32(Supp.2):3 083-3 091.(in Chinese))
|
[13] |
邓清海,巩林贤,马凤山,等. 基于颗粒流的直切槽式巴西圆盘裂纹扩展分析[J]. 工程地质学报,2017,25(2):402-409.(DENG Qinghai,GONG Linxian,MA Fengxian,et al. Analysis of crack propagation of crack straight through Brazilian disc using particle flow code[J]. Journal of Engineering Geology,2017,25(2):402-409.(in Chinese))
|
[14] |
黄彦华,杨圣奇. 非共面双裂隙红砂岩宏细观力学行为颗粒流模拟[J]. 岩石力学与工程学报,2014,33(8):1 644-1 653.(HUANG Yanhua,YANG Shengqi. Particle flow simulation of macro-and meso-mechanical behavior of red sandstone containing two pre-existing non-coplanar fissures[J]. Chinese Journal of Rock Mechanics and Engineering,2014,33(8):1 644-1 653.(in Chinese))
|
[15] |
MING X,PING K Z. Particle simulation of the failure process of brittle rock under triaxial compression[J]. International Journal of Minerals Metallurgy and Materials,2010,17(5):507-513.
|
[16] |
杨 庆,刘元俊. 岩石类材料裂纹扩展贯通的颗粒流模拟[J]. 岩石力学与工程学报,2012,31(增1):3 123-3 129.(YANG Qing,LIU Yuanjun. Simulations of crack propagation in rock-like materials using particle flow code[J]. Chinese Journal of Rock Mechanics and Engineering,2012,31(增1):3 123-3 129.(in Chinese))
|
[17] |
ZHANG X,WONG Y N L. Cracking processes in rock-like material containing a single flaw under uniaxial compression:a numerical study based on parallel bonded-particle model approach[J]. Rock Mechanics and Rock Engineering,2012,45(5):711-737.
|
[18] |
ZHANG X,WONG Y N L. Crack initiation,propagation and coalescence in rock-like material containing two flaws:A numerical study based on bonded-particle model approach[J]. Rock Mechanics and Rock Engineering,2013,46(5):1 001-1 021.
|
[19] |
李 勇,蔡卫兵,朱维申,等. 单轴压缩条件下平行双裂隙演化机理的颗粒流分析[J]. 中南大学学报:自然科学版,2019,50(12):3 035-3 045.(LI Yong,CAI Weibing,ZHU Weishen,et al. Particle flow analysis of parallel double crack evolution under uniaxial compression[J]. Journal of Central South University:Science and Technology,2019,50(12):3 035-3 045.(in Chinese))
|
[20] |
CAO R,CAO P,LIN H,et al. Mechanical behavior of brittle rock-like specimens with pre-existing fissures under uniaxial loading:experimental studies and particle mechanics approach[J]. Rock Mechanics and Rock Engineering,2016,49(3):763-783.
|
[21] |
李学华,牛志军,姚强岭,等. 孔洞式三叉裂隙砂岩裂纹扩展特征颗粒流分析[J]. 煤炭学报,2020,45(11):3 735-3 747.(LI Xuehua,NIU Zhijun,YAO Qiangling,et al. Particle flow analysis of crack propagation characteristics of hole-type trident cracks sandstone[J]. Journal of China Coal Society,2020,45(11):3 735-3 747.(in Chinese))
|
[22] |
阿比尔的,郑颖人,冯夏庭,等. 平行黏结模型宏细观力学参数相关性研究[J]. 岩土力学,2018,39(4):1 289-1 301.(ABI ERDI,ZHENG Yingren,FENG Xiating,et al. Relationship between particle micro and macro mechanical parameters of parallel-bond model[J]. Rock and Soil Mechanics,2018,39(4):1 289-1 301.(in Chinese))
|
[23] |
刘相如. 断续裂隙岩石常规三轴压缩力学行为及破坏机理研究[博士学位论文][D]. 徐州:中国矿业大学,2020.(LIU Xiangru. Study on the mechanical behavior and failure mechanism of fissured rock under triaxial compression[Ph. D. Thesis][D]. Xuzhou:China University of Mining and Technology,2020.(in Chinese))
|