|
[1] DUCHANE D. Hot dry rock:a realistic energy option[J]. Geothermal Resources Council Bulletin,1990,19(3):83–88.
[2] 赵阳升,万志军,康建荣. 高温岩体地热开发导论[M]. 北京:科学出版社,2004.(ZHAO Yangsheng,WAN Zhijun,KANG Jianrong. Introduction to geothermal extraction of hot dry rock[M]. Beijing:Science Press,2004.(in Chinese))
[3] 许锡昌,刘泉声. 高温下花岗岩的基本力学性质初步研究[J]. 岩土工程学报,2000,22(3):332–335.(XU Xichang,LIU Quansheng. A preliminary study on basic mechanical properties for granite at high temperature[J]. Chinese Journal of Geotechnical Engineering,2000,22(3):332–335.(in Chinese))
[4] 王靖涛,赵爱国,黄明昌. 花岗岩断裂韧度的高温效应[J]. 岩土工程学报,1989,11(6):113–119.(WANG Jingtao,ZHAO Aiguo,HUANG Mingchang. Effect of high temperature on the fracture toughness of granite[J]. Chinese Journal of Geotechnical Engineering,1989,11(6):113–119.(in Chinese))
[5] 朱合华,闫治国,邓 涛,等. 3种岩石高温后力学性质的试验研究[J]. 岩石力学与工程学报,2006,25(10):1 945–1 950.(ZHU Hehua,YAN Zhiguo,DENG Tao,et al. Testing study on mechanical properties of tuff,granite and breccia after high temperatures[J]. Chinese Journal of Rock Mechanics and Engineering,2006,25(10):1 945–1 950.(in Chinese))
[6] 杜守继,刘 华,职洪涛,等. 高温后花岗岩力学性能的试验研究[J]. 岩石力学与工程学报,2004,23(14):2 359–2 364.(DU Shouji,LIU Hua,ZHI Hongtao,et al. Testing study on mechanical properties of post-high-temperature granite[J]. Chinese Journal of Rock Mechanics and Engineering,2004,23(14):2 359–2 364.(in Chinese))
[7] FUJII Y,KIYAMA T,ISHIJIMA Y,et al. Circumferential strain behavior during creep tests of brittle rocks[J]. International Journal of Rock Mechanics and Mining Sciences,1999,36(3):323–337.
[8] 黄炳香,邓广哲,王广地. 温度影响下北山花岗岩蠕变断裂特性研究[J]. 岩土力学,2003,24(增2):203–206.(HUANG Bingxiang,DENG Guangzhe,WANG Guangdi. Research on characters of creep and rupture for Beishan granite under temperature effect[J]. Rock and Soil Mechanics,2003,24(Supp.2):203–206.(in Chinese))
[9] 张曾荣,何绍勋,奚小双. 望湘花岗岩高温高压流变试验[J]. 中南工业大学学报,1999,30(3):221–224.(ZHANG Zengrong,HE Shaoxun,XI Xiaoshuang. Experimental deformation of Wangxiang granite at high temperature and pressure[J]. Journal of Central South University of Technology,1999,30(3):221–224.(in Chinese))
[10] KAREL S,BEDRICH M,RADEK M. High-temperature microstructures and rheology of deformed granite,Erzgehirge,Bohemian massif[J]. Journal of Structural Geology,1996,18(6):719–733.
[11] YOSHITAKA A,KAZUHIKO I,YOSHIYUKI T. Compressional wave velocity of granite and amphibolite up to melting temperatures at 1 GPa[J]. Tectonophysics,2002,351(3):255–261.
[12] RUFFET C,GUEGUEN Y,DAROT M. Complex conductivity measurements and fractal nature of porosity[J]. Geophysics,1991,56(6):758–768.
[13] 万志军,赵阳升,董付科,等. 高温及三轴应力下花岗岩体力学特性的试验研究[J]. 岩石力学与工程学报,2008,27(1):72–77.(WAN Zhijun,ZHAO Yangsheng,DONG Fuke,et al. Experimental study on mechanical characteristics of granite under high temperatures and triaxial stresses[J]. Chinese Journal of Rock Mechanics and Engineering,2008,27(1):72–77.(in Chinese))
[14] 张 宁,赵阳升,万志军,等. 高温作用下花岗岩三轴蠕变特征的试验研究[J]. 岩土工程学报,2009,31(8):1 309–1 313.(ZHANG Ning,ZHAO Yangsheng,WAN Zhijun,et al. Experimental study on triaxial creep properties of granite under high temperature[J]. Chinese Journal of Geotechnical Engineering,2009,31(8):1 309–1 313.(in Chinese))
[15] 郤保平,赵阳升,万志军,等. 高温静水应力状态花岗岩中钻孔围岩的流变试验研究[J]. 岩石力学与工程学报,2008,27(8):1 659– 1 666.(XI Baoping,ZHAO Yangsheng,WAN Zhijun,et al. Rheological experimental investigation on surrounding rock mass of granite under high temperature and hydrostatic stress[J]. Chinese Journal of Rock Mechanics and Engineering,2008,27(8):1 659–1 666.(in Chinese))
[16] 赵阳升,万志军,张 渊,等. 20 MN伺服控制高温高压岩体三轴试验机的研制[J]. 岩石力学与工程学报,2008,27(1):1–8.(ZHAO Yangsheng,WAN Zhijun,ZHANG Yuan,et al. Research and development of 20 MN servo-controlled rock triaxial testing system with high temperature and high pressure[J]. Chinese Journal of Rock Mechanics and Engineering,2008,27(1):1–8.(in Chinese))
[17] 赵阳升,孟巧荣,康天合,等. 显微CT试验技术与花岗岩热破裂特征的细观研究[J]. 岩石力学与工程学报,2008,27(1):28–34.(ZHAO Yangsheng,MENG Qiaorong,KANG Tianhe,et al. Micro-CT experimental technology meso-investigation on thermal fracturing characteristics of granite[J]. Chinese Journal of Rock Mechanics and Engineering,2008,27(1):28–34.(in Chinese))
|