|
|
|
| EXPERIMENTAL INVESTIGATIONS ON STATIC LOADING RATE EFFECTS ON MECHANICAL PROPERTIES AND ENERGY MECHANISM OF COARSE CRYSTAL GRAIN MARBLE UNDER UNIAXIAL COMPRESSION |
| HUANG Da1，2，3，HUANG Runqiu2，ZHANG Yongxing1，3 |
| (1. College of Civil Engineering，Chongqing University，Chongqing 400045，China；2. State Key Laboratory of Geohazard Prevention and Geoenvironment Protection，Chengdu University of Technology，Chengdu，Sichuan 610059，China；3. Key Laboratory of New Technology for Construction of Cities in Mountain Area，Ministry of Education，Chongqing University，Chongqing 400045，China) |
|
|
|
|
Abstract Loading rate has an important influence on rock mechanical properties. The influence degree is closely related to the microstructure of rock，loading and unloading paths and states，etc.. Based on the uniaxial compression tests of coarse crystal grain marble with nine strain rate levels in range of static loading rate，the influences of loading strain rate on stress-strain curve，failure pattern，strength，elastic modulus，deformation modulus and strain energy dissipation and release of the marble are investigated；and the energy mechanism of rock damage evolution is discussed. The initial cracking stress and critical dilatancy stress of rock specimens under different loading rates can be obtained by the relations of total volumetric strain and crack volumetric strain with initial cracking stress and critical dilatancy stress. The loading strain rate of about 1×10－3 s－1 is the dividing point. When the strain rate is less than the value，a certain plastic yield or flowing section near the peak of stress-strain curve is still present；but when the strain rate is more than the value，the fold line type near the peak of stress-strain curve is present. The fracture pattern of rock specimen changes from tension-shear to tensile rip and even rip-ejection with the increase of loading strain rate. Generally，the initial cracking stress，critical dilatancy stress，and uniaxial compressive strength increase with the loading strain rate；and the initial cracking stress and critical dilatancy stress are more closer to the peak strength. But when the loading strain rate is 1×10－4–1×10－3 s－1，a relative low value area is present for all values mentioned above，which is related to the microstructure of coarse crystal grain marble. The correlations between the initial cracking stress，critical dilatancy stress，elastic modulus and deformation modulus and the uniaxial compressive strength are linear. Under uniaxial compression，the more the energy dissipation before peak strength is，the higher the strength is；and the more the energy release after the peak strength is，the stronger the tensile through fracture characteristic is，and the more the fractured blocks are. The energy dissipation makes rock damage and the strength loss；and the energy release makes the macrofracture surface be run-through，inducing integral damage.
|
|
Received: 05 September 2011
|
|
|
|
| [1] HUDSON J A，HARRISON J P. Engineering rock mechanics：an introduction to the principles[M]. New York：Pergamon Press，1997：101–123.
[2] HARRISON J P，HUDSON J A. Engineering rock mechanics part II：illustrative worked examples[M]. New York：Pergamon Press，2000：28–45.
[3] 黄润秋，黄 达. 高地应力条件下卸荷速率对锦屏大理岩力学特性影响规律试验研究[J]. 岩石力学与工程学报，2010，29(1)：21–33.(HUANG Runqiu，HUANG Da. Experimental research on affection laws of unloading rates on mechanical properties of Jinping marble under high geostress[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(1)：21–33.(in Chinese))
[4] MOUTHEREAU F，FILLON C，MA K F. Distribution of strain rates in the Taiwan orogenic wedge[J]. Earth and Planetary Science Letters，2009，284(3/4)：361–385.
[5] QI C Z，WANG M Y，QIAN Q H. Strain-rate effects on the strength and fragmentation size of rocks[J]. International Journal of Impact Engineering，2009，36(12)：1 355–1 364.
[6] 李夕兵，古德生. 岩石冲击动力学研究内容及其应用[J]. 西部探矿工程，1996，8(6)：1–2.(LI Xibing，GU Desheng. Research content and application of rock impulsion dynamics[J]. West-China Exploration Engineering，1996，8(6)：1–2.(in Chinese))
[7] 洪 亮，李夕兵，马春德，等. 岩石动态强度及其应变率灵敏性的尺寸效应研究[J]. 岩石力学与工程学报，2008，27(3)：527–533.(HONG Liang，LI Xibing，MA Chunde，et al. Study on size effect of rock dynamic strength and strain rate sensitivity[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(3)：527–533.(in Chinese))
[8] 李 刚，陈正汉，谢 云，等. 高应变率条件下三峡工程花岗岩动力特性的试验研究[J]. 岩土力学，2007，28(9)：1 833–1 840.(LI Gang，CHEN Zhenghan，XIE Yun，et al. Test research on dynamic characteristics of Three Gorges granite under high strain rate[J]. Rock and Soil Mechanics，2007，28(9)：1 833–1 840.(in Chinese))
[9] ZHANG Z X，KOU S Q，Jiang L G，et al. Effects of loading rate on rock fracture：fracture characteristics and energy partitioning[J]. International Journal of Rock Mechanics and Mining Sciences，2000，
37(5)：745–762.
[10] ZHOU X P，YANG H Q，ZHANG Y X. Rate dependent critical strain energy density factor of Huanglong limestone[J]. Theoretical and Applied Fracture Mechanics，2009，51(1)：57–61.
[11] 李战鲁，王启智. 加载速率对岩石动态断裂韧度影响的实验研究[J]. 岩土工程学报，2006，28(12)：2 116–2 120.(LI Zhanlu，WANG Qizhi. Experimental research on effect of loading rate for dynamic fracture toughness of rock[J]. Chinese Journal of Geotechnical Engineering，2006，28(12)：2 116–2 120.(in Chinese))
[12] MAHMUTO?LU L. The effects of strain rate and saturation on a micro-cracked marble[J]. Engineering Geology，2006，82(3)：137–144.
[13] 杨海清，周小平. 灰岩单轴压缩损伤演化试验研究[J]. 土木工程学报，2010，43(5)：117–123.(YANG Haiqing，ZHOU Xiaoping. Experimental investigation of damage evolution of limestone under uniaxial compression[J]. China Civil Engineering Journal，2010，43(5)：117–123.(in Chinese))
[14] 朱泽奇，盛 谦，冷先伦，等. 三峡花岗岩起裂机制研究[J]. 岩石力学与工程学报，2007，26(12)：2 570–2 575.(ZHU Zeqi，SHENG Qian，LENG Xianlun，et al. Study of crack initiation mechanism of Three Gorges granite[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(12)：2 570–2 575.(in Chinese))
[15] 谢和平，鞠 杨，黎立云. 基于能量耗散与释放原理的岩石强度与整体破坏准则[J]. 岩石力学与工程学报，2005，24(17)：3 003–3 010. (XIE Heping，JU Yang，LI Liyun. Criteria for strength and structural failure of rocks based on energy dissipation and energy release principles[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(17)：3 003–3 010.(in Chinese))
[16] 尤明庆，苏承东. 大理岩试样循环加载强化作用的试验研究[J]. 固体力学学报，2009，29(1)：66–72.(YOU Mingqing，SU Chengdong. Experimental study on strengthening of marble specimen in cyclic loading of uniaxial or pseudo-triaxial compression[J]. Chinese Journal of Solid Mechanics，2009，29(1)：66–72.(in Chinese))
[17] 余贤斌，谢 强，李心一，等. 岩石直接拉伸与压缩变形的循环加载实验与双模量本构模型[J]. 岩土工程学报，2005，27(9)：988–993.(YU Xianbin，XIE Qiang，LI Xinyi，et al. Cycle loading tests of rock samples under direct tension and compression and bi-modular constitutive model[J]. Chinese Journal of Geotechnical Engineering，2005，27(9)：988–993.
[18] STAVROGIN A N，TARASOV B G. Experimental physics and rock mechanics：results of laboratory study[M]. Tokyo：A. A. Balkema，2001：204–220.
[19] 王洪亮，范鹏贤，王明洋，等. 应变率对红砂岩渐进破坏过程和特征应力的影响[J]. 岩土力学，2011，32(5)：1 340–1 346.(WANG Hongliang，FAN Pengxian，WANG Mingyang，et al. Influence of strain rate on progressive failure process and characteristic stresses of red sandstone[J]. Rock and Soil Mechanics，2011，32(5)：1 340–1 346. (in Chinese))
[20] 尤明庆. 两种晶粒大理岩的力学性质研究[J]. 岩土力学，2005，26(1)：91–96.(YOU Mingqing. A study of mechanical property of two marbles with different crystal sizes[J]. Rock and Soil Mechanics，2005，26(1)：91–96.(in Chinese)) |
|
|
|
2012, Vol. 31 
