[1] 仵彦卿，张倬元. 岩体水力学导论[M]. 成都：西南交通大学出版社，1995：90–154.(WU Yanqing，ZHANG Zhuoyuan. Introduction of hydrodymanics of rockmass[M]. Chengdu：Southwest Jiaotong University Press，1995：90–154.(in Chinese)).

[2] 刘泉声，吴月秀，刘  滨. 应力对裂隙岩体等效渗透系数影响的离散元分析[J]. 岩石力学与工程学报，2011，30(1)：176–183.(LIU Quansheng，WU Yuexiu，LIU Bin. Discrete element analysis about effect of stress on equivalent permeability of fractured rockmass[J]. Chinese Journal of Rock Mechanics And Engineering，2011，30(1)：176–183.(in Chinese))

[3] 吴月秀. 粗糙节理网络模拟及裂隙岩体水力耦合特性研究[博士学位论文][D]. 武汉：中国科学院武汉岩土力学研究所，2010.(WU Yuexiu. Modeling Rough joint network and study on hydro-mechanical behavior of fractured rock mass[Ph. D. Thesis][D]. Wuhan：Institute of Rock and Soil Mechanics，Chinese Academy of Sciences，2010.(in Chinese))

[4] 殷有泉. 考虑损伤的节理本构模型[J]. 工程地质学报，1994，2(4)：1–6.(YIN Youquan. Joint constitutive model considering damage[J]. Journal of Engineering Geology，1994，2(4)：1–6.(in Chinese))

[5] 李海波，冯海鹏，刘  博. 不同剪切速率下岩石节理的强度特性研究[J]. 岩石力学与工程学报，2006，25(12)：2 435–2 440.(LI Haibo，FENG Haipeng，LIU Bo. Study on strength behaviors of rock joints under different shearing deformation velocities[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(12)：2 435–2 440.(in Chinese)) 

[6] 李夕兵，王卫华，马春德. 不同频率载荷作用下的岩石节理本构模型[J]. 岩石力学与工程学报，2007，26(2)：247–253.(LI Xibing，WANG Weihua，MA Chunde. Constitutive model of rock joints under compression loads with different frequencies[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(2)：247–253.(in Chinese)) 

[7] 闫子舰，夏才初，王晓东，等. 岩石节理流变力学特性及其本构模型[J]. 同济大学学报：自然科学版，2009，37(5)：601–606.(YAN Zijian，XIA Caichu，WANG Xiaodong，et al. Shear Rheological Properties and Model for Rock Joints[J]. Journal of Tongji University：Natural Science，2009，37(5)，601–606.(in Chinese))

[8] PEARCE H. A micro-mechanical approach to the shear behaviour of rock joints[Ph. D. Thesis][D]. Australia：Department of Civil Engineering，Monash University，2001.

[9] JULIAN P S，CHRIS M. Haber?eld. A theoretical model for rock joints subjected to constant normal stiffness direct shear[J]. International Journal of Rock Mechanics and Mining Sciences，2002，39(5)：539–553.

[10] JIANG Y J，LI B，TANABASHI Y. Estimating the relation between surface roughness and mechanical properties of rock joints[J]. International Journal of Rock Mechanics and Mining Sciences，2006， 43(6)：837–846.

[11] GOODMAN R E. Methods of geological engineering in discontinuous rock[M]. New York：West Group，1976：125–173.

[12] BANDIS S C. Mechanical properties of rock joints[C]// Proceedings of the International Symposium on Rock Joints. Rotterdam AA. Balkema. 1990：125–140.

[13] SWAN G. Determination of stiffness and other joint properties from roughness measurements[J]. Rock Mechanics and Rock Engineering， 1983，16(1)：19–38.

[14] MALAMA B，KULATILAKE P H S W. Models for normal fracture deformation under compressive loading[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(6)：893–901.

[15] BAGHBANAN A，JING L R. Stress effects on permeability in a fractured rock mass with correlated fracture length and aperture[J]. International Journal of Rock Mechanics and Mining Sciences，2008， 45(8)：1 320–1 334.

[16] PATTON F D. Multiple modes of shear failure in rock[C]// Proceedings of 1st conference on International Society of Rock Mechanics. Lisbon，Portugal：[s. n.]，1966：509–513.

[17] BANDIS S C，LUMSDEN A C，BARTON N R. Fundamentals of rock joint deformation[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1983，20(6)：249–68.

[18] BARTON N，BANDIS S，BAKHTAR K. Strength，deformation and conductivity coupling of rock joints[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1985，22(3)：121–40.

[19] LADANYI B，ARCHAMBAULT G. Stimulation of shear behaviour of a jointed rock mass [C]// The 11th U.S. Symposium on Rock Mechanics.  Berkely，USA：[s. n.]，1969：105–125.

[20] SAEB S，AMADEI B. Modeling rock joints under shear and normal loading[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1992，29(3)：267–278.

[21] SOULEY M，HOMAND F. Stability of jointed rock masses evaluated by udec with an extended Saeb-Amadei constitutive law[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1996，33(3)：233–244.

[22] ITASCA. UDEC 4.0 manual[M]. [S. l.]：[s. n.]，2010：14–67.

[23] SAEB S，AMADEI B. Effect of boundary conditions on the shear behaviour of a dilatant rock joint[C]// Proceedings of the 30th U.S. Symposium on Rock Mechanics. Morsantown，WV：[s. n.]，1989：107–114.

[24] SAEB S，AMADEI B. Modelling joint response under constant or variable normal stiffness boundary conditions[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1990，27(3)：213–217.

[25] AMADEI B，WIBOWO J，STURE S，PRICE R H. Applicability of existing models to predict the behavior of replicas of natural fractures of welded tuff under different boundary conditions[J]. Geotechnical and Geological Engineering，1998：16(2)：79–128.

[26] GOODMAN R E. The mechanical properties of joints [C]// Proceedings of the Third Congress on ISRM. Washington D. C.，USA：[s. n.]，1974：127–140.

[27] GOODMAN R E. Introduction in Rock Mechanics[M]. New York：Wiley，1980：147–215.

[28] GOODMAN R E，BOYLE W. Non-linear analysis for calculating the support of a rock block with dilatant joint faces[J]. Computers and Geotechnics，1987，3(1)：62.