大直径薄壁筒桩承载力计算新方法

Abstract
Figure/Table
References (16)
Related Citation (15)

Download: PDF (466 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on the imperial college pile(ICP) method，a new method is proposed to calculate the bearing capacity of large-diameter-tubular-pile，in which the contribution of soil plug is considered. However the inner pile friction is not taken into account due to the small value，not full-length distributed and conservative consideration. In this approach，the end resistance is the average value of tip resistance from the pile tip to the depth of 2 times of the pile diameter. In view of the unpopularity of ring shear test，the peak value of direct shear test is used for the friction angle of the interface by amplification of 1.2，which is verified through test results. The radial effective stress is very important in bearing capacity calculation，and a simplified method with a few parameters is put forward. This new approach is much simpler than ICP method，and could have satisfactory estimations if compared with α-method，Randolph methods and V&F method. The test results prove that the new method is reliable.

Key words： pile foundations large-diameter-tubular-pile bearing capacity calculation ICP method lateral friction

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Yiwen1
	LI Boan2
	LI Jianqiang2
	ZHOU Jian1

Cite this article:

LI Yiwen1,LI Boan2,LI Jianqiang2, et al. A NEW CALCULATION METHOD FOR LARGE-DIAMETER-TUBULAR-PILE BEARING CAPACITY[J]. , 2012, 31(S1): 3239-3244.

URL:

https://rockmech.whrsm.ac.cn/EN/Y2012/V31/IS1/3239

[1]周建. 大直径现浇混凝土薄壁筒桩竖向承载力计算研究[J]. 岩石力学与工程学报，2006，25(增1)：3 181–3 189.(ZHOU Jian. Study on vertical bearing capacity of large-diameter cast-in-situ thin-wall tubular pile[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(Supp.1)：3 181–3 189.(in Chinese))

[2]JARDINE R J，CHOW F C，OVERY R，et al. ICP design methods for driven piles in sands and clays[M]. London：Thomas Telford Ltd.， 2005：28–37.

[3]RANDOLPH M F，LEONG E C，HOULSBY G T. One-dimensional analysis of soil plugs in pipe piles[J]. Geotechnique，1991，41(4)：587–598.

[4]中华人民共和国行业标准编写组. JGJ94—94建筑桩基技术规范[S]. 北京：中国建筑工业出版社，1995.(The Professional Standards Compilation Group of Peoples Republic of China. JGJ94—94 Technical code for building pile foundation[S]. Beijing：China Architecture and Building Press，1995.(in Chinese))

[5]杭州国立基础工程技术开发有限公司. 大直径现浇混凝土薄壁筒桩专利——技术研究与推广应用[R]. 杭州：杭州国立基础工程技术开发有限公司，2004.(Hangzbou Guoli Infrastructure Co.，Ltd.. Patent of large- diameter cast-in-situ thin-wall tubular pile—— technique and application[R]. Hangzhou：Hangzbou Guoli Infrastructure Co.，Ltd.，2004.(in Chinese))

[6]浙江省建设厅. DB33/1044—2007大直径现浇混凝土薄壁筒桩技术规程[S]. [S.l.]：[s.n.]，2007.(Zhejiang Provincial Construction Administration. DB33/1044—2007 Technical code for cast-in-situ concrete large-diameter tubular Pile[S]. [S.l.]：[s.n.]，2007.(in Chinese))

[7]PAIK K，SALGADO R. Determination of bearing capacity of open- ended piles in sand[J]. Journal of Geotechnical and Geoenvironmental Engineering，2003，129(1)：46–57.

[8]郭平. 大直径现浇混凝土薄壁筒桩竖向承载性状数值分析[硕士学位论文][D]. 杭州：浙江大学，2005.(GUO Ping. Numeric analysis of the properties of vertical bearing capacities for cast in-situ concrete tubular piles[M. S. Thesis][D]. Hangzhou：Zhejiang University，2005.(in Chinese))

[9]刘润，禚瑞花，闫澍旺. 大直径钢管桩土塞效应的判断和沉桩过程分析[J]. 海洋工程，2005，23(2)：71–76.(LIU Run，ZHUO Ruihua， YAN Shuwang. Plug effect on drivability of large-diameter steel piles[J]. The Ocean Engineering，2005，23(2)：71–76.(in Chinese))

[10]LAI P，MCVAY M，BLOOMQUIST D，et al. Axial pile capacity of large diameter cylinder piles[C]// Proceedings of Research to Practice in Geotechnical Engineering Congress. New Orleans，USA：[s.n.]，2008：366–383.

[11]徐泽友，卢廷浩，丁明武. 高塑性黏土与混凝土接触面剪切特性[J]. 河海大学学报：自然科学版，2009，37(1)：71–74.(XU Zeyou，LU Tinghao，DING Mingwu. Interface shear characteristic of highly plastic clay and concrete[J]. Journal of Hohai University：Natural Science， 2009，37(1)：71–74.(in Chinese))

[12]杨有莲，朱俊高，余挺，等. 土与结构接触面力学特性环剪试验研究[J]. 岩土力学，2009，30(11)：3 256–3 260.(YANG Youlian，ZHU Jungao，YU Ting，et al. Experimental study of mechanical behaviour of soil-structure interface by ring shear test[J]. 2009，30(11)：3 256–3 260.(in Chinese))

[13]FELLENIUS B H. Effective stress analysis and set-up for shaft capacity of piles in clay[C]// Proceedings of From Research to Practice in Geotechnical Engineering Congress. [S.l.]：Geotechnical Special Publication，2008：384–406.

[14]VIJAYVERGIYA V N，FOCHT J A. A new way to predict the capacity of piles in clay[C]// Proceedings of the 4th Annual Offshore Technology Conference. Houston，USA：[s.n.]，1972：865–874.

[15]RANDOLPH M F. Science and empiricism in pile foundation design[J]. Geotechnique，2003，53(10)：847–875.

[16]杭宁高速公路二期项目. 现浇砼薄壁筒桩加固桥头软基试验研究报告[R]. 杭州：杭宁高速公路科研项目组，2001.(Second Phase of Hangzhou——Nanjing Expressway Project. Research report about the test of the bridgehead soft ground foundation reinforced by cast-in-situ concrete tubular pile[R]. Hangzhou：Hangzhou——Nanjing Expressway Research Group，2001.(in Chinese))