|
|
|
| DETERMINATION OF STIFFNESS PARAMETERS OF JOINTED ROCK MASSES WITH 3DEC SIMULATIONS |
| WANG He，GAO Yongtao，JIN Aibing，ZHANG Kai |
| (College of Civil and Environment Engineering，University of Science and Technology Beijing，Beijing 100083，China) |
|
|
|
|
Abstract Aiming at the issue in determining the stiffness parameters of jointed rocks，numerical analysis with distinct element code (3DEC) was carried out. By means of direct shearing test of rock structure in combination with theoretical analysis，the empirical formulae representing rock stiffness parameters were obtained. Then a modified empirical formula is developed considering Bandis empirical formula with new function f(τ/τp). The results indicate that the contact parameters of normal stiffness Kn and shear stiffness Kst obtained by empirical formula through fitting could reflect the deformation behaviours of rocks before shearing failure of structural plane. Accordingly，numerical results were used to verify laboratory test results. It is thereafter believed that the shear stiffness(Kst) could be used to understand the shearing behaviours of joints before failure.
|
|
Received: 20 May 2013
|
|
|
|
| [1] 韩立军，宗义江，韩贵雷，等. 岩石结构面注浆加固抗剪特性试验研究[J]. 岩土力学，2011，32(9)：2 570–2 576.(HAN Lijun，ZONG Yijiang，HAN Guilei，et al. Study of shear properties of rock structural plane by grouting reinforcement[J]. Rock and Soil Mechanics，2011，32(9)：2 570–2 576.(in Chinese))
[2] 蔡美峰，何满潮，刘东燕. 岩石力学与工程[M]. 北京：科学出版社，2002.(CAI Meifeng，HE Manchao，LIU Dongyan. Rock mechanics and engineering[M]. Beijing：Science Press，2002.(in Chinese))
[3] 张林洪. 结构面抗剪强度的一种确定方法[J]. 岩石力学与工程学报，2001，20(1)：114–117.(ZHANG Linhong. A determination method of joint shear strength[J]. Chinese Journal of Rock Mechanics and Engineering，2001，20(1)：114–117.(in Chinese))
[4] 李同录，罗世毅，何 剑，等. 节理岩体力学参数的选取与应用[J]. 岩石力学与工程学报，2004，23(13)：2 182–2 186.(LI Tonglu，LUO Shiyi，HE Jian，et al. Determination and application of mechanical parameters for jointed rock masses[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(13)：2 182–2 186.(in Chinese))
[5] 李克钢，许 江，李树春. 三峡库区岩体天然结构面抗剪性能试验研究[J]. 岩土力学，2005，26(7)：1 063–1 067.(LI Kegang，XU Jiang，LI Shuchun. Study on property of rock mass discontinuity shear strength in Three Gorges reservoir area[J]. Rock and Soil Mechanics，2005，26(7)：1 063–1 067.(in Chinese))
[6] 朱焕春，BRUMMER R，ANDRIEUX P. 节理岩体数值计算方法及其应用(一)：方法与讨论[J]. 岩石力学与工程学报，2004，23(20)：3 444–3 449.(ZHU Huanchun，BRUMMER R，ANDRIEUX P. Numerical methods and application for jointed rock mass，Part 1：approaches and discussions[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(20)：3 444–3 449.(in Chinese))
[7] 朱焕春，ANDRIEUX P，钟辉亚. 节理岩体数值计算方法及其应用(二)：工程应用[J]. 岩石力学与工程学报，2005，24(1)：89–96.(ZHU Huanchun，ANDRIEUX P，ZHONG Huiya. Numerical modelling methods and application in jointed rock mass，Part 2：application for engineering practice[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(1)：89–96.(in Chinese))
[8] 周先齐，徐卫亚，钮新强，等. 离散单元法研究进展及应用综述[J]. 岩土力学，2007，28(增)：408–416.(ZHOU Xianqi，XU Weiya，NIU Xinqiang，et al. A review of distinct element method researching progress and application[J]. Rock and Soil Mechanics，2007，28(Supp.)：408–416.(in Chinese))
[9] 郑榕明，陈文胜，葛修润，等. 金山店铁矿地下开采引起地表变形规律的离散元模拟研究[J]. 岩石力学与工程学报，2002，21(8)： 1 130–1 135.(ZHENG Rongming，CHEN Wensheng，GE Xiurun，et al. Modelling of ground surface subsidence at Jinshandian underground iron mine by discrete element method[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(8)：1 130–1 135.(in Chinese))
[10] KULHAWY F H. Stress deformation properties of rock and rock discontinuities[J]. Engineering Geology，1975，8(4)：327–350.
[11] BANDIS S C，LUMSDEN A C，BARTON N R. Fundamentals of rock joint deformation[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1983，20(6)：249–268. |
|
|
|
2014, Vol. 33 
